Xinje Plc Usb Driver Install ★ Full HD

To install the USB driver for a , you typically need to install the XNETDrvInst.exe

driver package as an administrator before connecting your device. Step-by-Step Installation Guide Download the Driver : Visit the official Xinje Download Center

to get the latest USB driver or programming software (like XDPro or XCPro) which often includes the necessary drivers. Prepare for Installation Disconnect the PLC or HMI from your computer first. Temporarily disable antivirus software to prevent installation blocks. Run the Installer : Locate the driver file (e.g., XNETDrvInst.exe ), right-click it, and select "Run as administrator" Connect the Hardware

: Once installation is complete, connect the PLC to your PC using the appropriate USB cable. Verify in Device Manager Right-click "This PC" or "My Computer" and select Device Manager Look under "Ports (COM & LPT)" for an entry like "USB-Serial Port" "Xinje TH USB device" Note the assigned COM port number (e.g., COM3) for use in your programming software. Wuxi Xinje Electric Co., Ltd. Troubleshooting Common Issues Driver Signature Enforcement (Windows 10/11)

: If the driver fails to install, you may need to disable driver signature enforcement via Settings > Update & Security > Recovery > Advanced startup Manual Update

: If the device shows an error in Device Manager, right-click it, select "Update driver,"

and browse to the driver folder within your installed Xinje software directory. Communication Settings : In your programming software (e.g., XCPro), go to Option > Comm Mode Settings

and ensure the COM port matches the one seen in Device Manager. or instructions for a particular PLC series like the XD or XC? TG/TE series HMI manual【Hardware】 - Kalatec

Installing a Xinje PLC USB driver is a straightforward process, but it requires specific steps to ensure your PC communicates correctly with the hardware. Follow this guide to get your connection up and running. 🛠️ Prerequisites Before starting, ensure you have the following: A Xinje PLC (XC, XD, or XL series) USB Programming Cable (usually a standard USB-A to USB-B or Mini-USB) XDPPro or XDPro Software installed on your Windows PC Administrator rights on your computer 📂 Step 1: Locate the Driver Files

Xinje drivers are typically bundled with their programming software. You don’t usually need to download a separate installer. Default Path: C:\Program Files (x86)\Xinje\XDPPro\USB_Driver If you are using the newer

software, look in the corresponding installation folder for the USB_Driver directory. 🔌 Step 2: Connect the Hardware Power on your into the PLC and then into your computer.

Windows will likely attempt to find a driver and fail, showing an "Unknown Device" in the Device Manager. ⚙️ Step 3: Manual Installation via Device Manager

Windows often fails to "auto-detect" these industrial drivers, so you must point it to the folder manually. Right-click the Start button and select Device Manager "Other Devices" "Ports (COM & LPT)" Right-click the device (often labeled "Xinje PLC" "USB Serial Port" ) and select Update Driver "Browse my computer for driver software" and navigate to the USB_Driver folder mentioned in Step 1.

. Windows will install the driver. You may see a security warning; select "Install this driver software anyway" ✅ Step 4: Verify the Connection Once installed, the device should appear under Ports (COM & LPT) as "USB Serial Port (COMx)" or under Universal Serial Bus controllers Communication Settings

as the connection type (or select the specific COM port assigned).

. If it says "Connection Successful," you are ready to upload or download code. 💡 Troubleshooting Tips Driver Signature Error:

If Windows 10/11 blocks the install, you may need to temporarily Disable Driver Signature Enforcement in the Advanced Startup settings. Cable Check:

If no device appears in Device Manager at all, try a different USB port or cable; industrial environments are tough on hardware. Software Version:

Ensure your software version matches your PLC series (XC series uses XDPPro; XD/XL series uses XDPro). If you'd like to dive deeper, I can help you with: Finding the latest download link for XDPPro/XDPro. Step-by-step instructions for Disabling Driver Signature Enforcement A guide on uploading your first program once the driver is fixed. Which of these would be most helpful for your project?

To successfully install and configure the USB driver for a , you must download the driver from an official source, install it manually through the Windows Device Manager if necessary, and then configure the corresponding COM port within the Xinje programming software (XDPPro or XCPPro). 1. Driver Acquisition and Installation

The USB driver is typically included with the Xinje programming software or available as a separate "COM-USB driver" download. : Access the official Xinje Download Center or the specific XD3 series product page to find the latest "COM-USB driver". Manual Installation

: If the driver does not auto-install when the PLC is connected: Windows Device Manager

Locate the device (it may appear under "Other devices" or "Ports" with a yellow exclamation mark). Right-click and select Update driver

, then browse to the folder where you extracted the downloaded driver. Wuxi Xinje Electric Co., Ltd. 2. Software Configuration

Once the driver is recognized as a "USB Serial Port (COMx)," you must link it to your programming environment. Software Identification for XD/XL series PLCs and for XC series models. Port Setup Comm Mode Settings Software Serial Port Config Select the specific number assigned in Device Manager. xinje plc usb driver install

. A successful connection will display a "Connect To PLC Succeeded" message. Wuxi Xinje Electric Co., Ltd. 3. Troubleshooting Connection Issues

If the "Connect To PLC Succeeded" prompt does not appear, verify the following: Hardware Check : Ensure you are using the correct RS232-USB converter cable or a direct USB cable if supported by your specific model. Driver Status

: Check Device Manager again. A yellow exclamation point indicates the driver is not working correctly and may need a fresh installation.

: Ensure the PLC is powered on and not in a state that blocks communication.

: For standard serial-to-USB connections, the default baud rate is often , with Even parity and 1 stop bit. or help identifying the specific driver version for your Windows OS? Download Center - Wuxi Xinje Electric Co., Ltd.

To install the USB driver for a Xinje PLC, you typically need to install the specific programming software for your PLC series, which often includes the necessary drivers automatically 1. Download Required Software

The driver you need depends on your PLC model and connection method: XD/XL Series: Download and install

(e.g., version V3.8.0). During the installation of XDPPro, the system will prompt you to install the USB driver XINJEConfig software automatically. XC Series: Download and install

(e.g., version v3.3r). If you are using a USB-XC programming cable, the driver is often based on the 2. Manual Driver Installation

If the driver does not install automatically or the device appears as "Unknown" in Device Manager Connect the PLC:

Power on the PLC and connect it to your PC via the USB or USB-to-RS232 cable. Open Device Manager: Right-click the Start button and select Device Manager Update Driver:

Locate the device (often under "Other devices" or "Ports"). Right-click it and select Update driver Browse Local Files: Browse my computer for drivers

. Navigate to the installation directory of your Xinje software (e.g., C:\Program Files (x86)\XINJE ) to locate the driver subfolder. 3. Verification and Port Settings Check COM Port: Once installed, the device should appear under Ports (COM & LPT)

as a "USB Serial Port" followed by a COM number (e.g., COM3). Port Limit: Ensure the assigned COM port number is COM20 or lower

. If it is higher, you may need to manually change it in the Port Settings Advanced properties to avoid connection issues. Software Config: In your programming software, go to Option > Software Serial Port Config

and select the matching COM port to establish a successful connection. Further Exploration

Access official manuals and the latest software versions directly from the Wuxi Xinje Download Center Review the USB-XC Cable Manual for specific wiring and chipset details (CH340). Follow a step-by-step Xinje PLC Connection Tutorial to see the software configuration in action. Are you having trouble with a specific PLC model or encountering a particular error message during the installation? Download Center - Wuxi Xinje Electric Co., Ltd.

Installing a Xinje PLC USB driver is the "handshake" that lets your PC talk to your industrial hardware. Whether you're using a direct USB cable or a USB-XC programming cable , follow this guide to bridge the gap. 1. Identify Your Cable and Controller Xinje PLCs usually connect in one of two ways: Direct USB Port: Newer models (like the ) often have a built-in USB port. USB-to-Serial Cable: Many older or slim models (XC series) require a specialized USB-XC programming cable . This cable typically uses a or similar chip to convert USB to RS232. 2. Download the Driver Do not rely on Windows to find the driver automatically. Visit the official Xinje Download Center Look for the "USB driver" "USB-to-Serial" driver under the software or tools section.

If you are using a 3rd party programming cable, you may need the CH341 driver specifically. 3. Installation Steps Disconnect the PLC:

Unplug the USB cable from your PC before starting the installation to avoid "unidentified device" errors. Run the Installer: Right-click the driver installer ( ) and select "Run as Administrator." The "Success" Check:

Once the installation finishes, plug the cable back into your PC and the PLC. Device Manager Verification: Device Manager on your Windows PC. Expand the Ports (COM & LPT) You should see "USB-SERIAL CH341 (COMx)" "Xinje USB" without any yellow warning triangles. Note the COM Port Number (e.g., COM3). 4. Configure Your Software

After the driver is "live," you must point your programming software to the right gate: (for XC series) or XINJE Config Communication Settings Serial Port Settings Select the that matched the number you saw in Device Manager. "Test Communication" to confirm the link is active. Troubleshooting Tips Driver Signature Error:

If you are on Windows 10 or 11 and the driver won't install, you might need to temporarily disable driver signature enforcement in your Windows startup settings. Cable Sequence:

Always connect the cable to the PC first, wait for the chime, and then connect to the PLC. for your particular Xinje PLC model? Download Center - Wuxi Xinje Electric Co., Ltd. To install the USB driver for a ,

To install the USB driver for a Xinje PLC, you typically need to install the Xinje PLC Programming Software (such as XDPPro or XS Studio), which includes the necessary driver files.  1. Identify Your PLC Series  Xinje offers different software depending on the PLC model:  XC Series: Uses XDPPro software.

XD/XL Series: Uses XDPPro (newer versions) or specific XD software. XS Series: Uses XS Studio (often based on CODESYS).  2. General Installation Steps 

Download the Software: Visit the Xinje Download Center or regional sites like Xinje Malaysia to get the latest programming software for your specific series.

Run the Installer: Execute the setup file as an administrator. The USB driver installation is usually bundled with the main software installation. Manual Driver Installation (if needed):

If the PLC is not recognized after software installation, connect the PLC to your PC via the USB cable. Open Device Manager on your Windows PC.

Look for an "Unknown Device" or a device labeled "Xinje PLC" under "Other devices" or "Ports (COM & LPT)". Right-click the device and select Update Driver.

Choose Browse my computer for drivers and point to the Driver or USB folder within the Xinje software installation directory (typically C:\Program Files (x86)\Xinje...). Verify Communication:

In the Xinje programming software, go to Communication Settings.

Select the correct connection type (USB or Serial via a USB-to-RS232 adapter like the USB-XC). Test the connection to ensure the PC can "see" the PLC.  3. Key Hardware Drivers 

Xinje TH USB Device: Common for various Xinje interfaces; version 1.0.5.0 is a known stable version for certain legacy hardware.

USB-XC Cable: If you are using a conversion cable (USB-XC), it may require a separate Prolific or CH340 serial-to-USB driver if not automatically installed by Windows.  4. Safety and Connection Tips 

Power Off: Always cut off external power before performing initial wiring or connecting expansion modules.

Cable Types: High-speed motion controllers (like the XDC series) or Ethernet-capable models (like the XD5) might use standard USB or Ethernet cables, but standard XC/XD models often require specific programming cables.  XINJE PLC XD5 Series Programmable Controller User Manual

Installing the Xinje PLC USB driver is a vital step for establishing communication between your PC and Xinje hardware, such as the XD, XL, or XC series. Without this driver, your programming software (like XDPPro or XS Studio) will not recognize the PLC through a USB or USB-to-Serial programming cable. Step 1: Download the Correct Driver

You can typically find the necessary drivers in the Download Center of the official Wuxi Xinje Electric Co. website.

Xinje TH USB Device: This is the most common driver for direct USB connections.

USB-to-Serial Drivers: If you are using a conversion cable (like the USB-XC), you may need standard serial drivers (such as CH340 or Prolific), which are often included with the cable or the PLC software installation. Step 2: Manual Installation via Device Manager

If Windows does not automatically install the driver upon connection, follow these steps to install it manually: Kylie Jmina USB-XC PLC Programming Cable Instruction Manual

To install the USB driver for a , you typically need to install the COM-USB driver from the official Xinje website or ensure it is bundled with your programming software (like XDPPro or XCPPro). This driver allows your PC to recognize the USB-to-RS232 programming cable used for communication. Step-by-Step Installation Guide Download the Driver: Visit the official Xinje Download Center

and look for the COM-USB driver or the specific driver for your series (e.g., XC, XD, or XL series). Alternatively, drivers for older devices like the Xinje TH USB Device

can sometimes be found through specialized driver repositories. Connect the Hardware: Plug your USB programming cable into your computer.

Note that many Xinje PLCs use a USB-XC cable, which is a USB-to-RS232 adapter with an 8-pin round head for the PLC port. Run the Installation:

Locate the downloaded .rar or .zip file, extract it, and run the setup file (often an .exe) with administrative rights. Follow the on-screen wizard to complete the installation. Verify in Device Manager: Open Device Manager on your Windows PC.

Look under "Ports (COM & LPT)" to find the newly assigned COM port number (e.g., COM3 or COM6). Xinjie PLC device Computer with a USB port

If you see a yellow exclamation mark, right-click the device and select "Update driver," then browse to the folder where you extracted the driver files. Configure Programming Software:

Open your software (e.g., XDPPro for XD/XL series or XCPPro for XC series). Go to Option > Software Serial Port Config. Select the correct COM port identified in Step 4.

Click Comm-Test. If successful, you will see a message like "Connect To PLC Succeeded". Troubleshooting Tips

Administrative Rights: Always run the installer as an administrator to ensure Windows doesn't block the driver files.

Cable Check: Ensure you are using the correct cable for your series. The USB-XC cable is the standard for most XC, XD, and XL models.

Auto-Detection: If the connection fails, many Xinje software tools have an "Auto-detect" button in the communication settings that can scan available ports for you. Download Center - Wuxi Xinje Electric Co., Ltd.

Introduction

Xinjie PLC is a programmable logic controller (PLC) widely used in industrial automation applications. To communicate with a computer, the Xinjie PLC requires a USB driver to be installed on the computer. In this paper, we will guide you through the step-by-step process of installing the Xinjie PLC USB driver.

Hardware and Software Requirements

Before installing the Xinjie PLC USB driver, ensure that you have the following hardware and software:

• Xinjie PLC device
• Computer with a USB port (Windows-based)
• Xinjie PLC USB cable
• Xinjie PLC USB driver software (downloadable from the manufacturer's website)

Pre-Installation Steps

Before installing the driver, follow these pre-installation steps:

1. Connect the Xinjie PLC to the computer: Connect the Xinjie PLC to the computer using the USB cable. Make sure the PLC is powered on.
2. Check the Device Manager: Open the Device Manager on your computer (Windows key + X and select Device Manager). Check if the Xinjie PLC is listed under "Other devices" or "Unknown devices". If it is, note down the device name and VID (Vendor ID) and PID (Product ID).
3. Download the driver software: Download the Xinjie PLC USB driver software from the manufacturer's website. Save the software to a folder on your computer.

Installing the Xinjie PLC USB Driver

To install the Xinjie PLC USB driver, follow these steps:

Method 1: Installing using the manufacturer's installation package

1. Run the installation package: Run the downloaded installation package (it should be an executable file, e.g., "setup.exe").
2. Follow the installation wizard: Follow the installation wizard to install the driver software. The wizard will guide you through the installation process.
3. Select the device: When prompted, select the Xinjie PLC device from the list of detected devices.
4. Complete the installation: Complete the installation process. The driver software will be installed, and the Xinjie PLC will be recognized by the computer.

Method 2: Installing using Windows Update

1. Connect the Xinjie PLC to the computer: Connect the Xinjie PLC to the computer using the USB cable.
2. Open Device Manager: Open the Device Manager on your computer (Windows key + X and select Device Manager).
3. Update driver: Right-click on the Xinjie PLC device listed under "Other devices" or "Unknown devices" and select "Update driver".
4. Search for updates: Select "Search automatically for updated driver software".
5. Install the driver: Windows will search for and install the driver software. The Xinjie PLC will be recognized by the computer.

Verifying the Installation

After installing the driver, verify that the installation was successful:

1. Open Device Manager: Open the Device Manager on your computer.
2. Check the device list: Check that the Xinjie PLC is listed under "Ports (COM & LPT)" or "Universal Serial Bus controllers".
3. Verify the COM port: Verify that the Xinjie PLC has been assigned a COM port (e.g., COM3, COM4, etc.).

Troubleshooting

If you encounter issues during installation, try the following troubleshooting steps:

• Reboot the computer: Reboot the computer and try installing the driver again.
• Check the USB connection: Check that the USB cable is securely connected to both the Xinjie PLC and the computer.
• Update the driver: Try updating the driver software to the latest version.

Conclusion

In this paper, we have provided a step-by-step guide on installing the Xinjie PLC USB driver. By following these steps, you should be able to successfully install the driver and communicate with the Xinjie PLC using a computer. If you encounter any issues, refer to the troubleshooting section or contact the manufacturer's technical support.

---

Step 3: Connect the PLC to PC

1. Ensure the PLC is powered ON (24V DC supply connected).
2. Connect a USB A-to-B cable between your PC and the PLC’s USB port.
3. Windows will attempt to auto-configure. Wait 10 seconds.

Step 2: Extract and Run Installer

1. Right-click the ZIP file → Extract All.
2. Navigate to the folder. Look for Setup.exe or DriverInstall.exe.
3. Right-click the installer → Run as administrator.
4. Follow the wizard. If prompted with a Windows security warning about an “Unknown publisher,” click Install anyway.

Opening

When Arman’s factory upgraded its assembly line, the new Xinje PLC arrived in a nondescript cardboard box: brushed metal case, terminal blocks labeled neatly, and a small USB port tucked into one side. The technician’s guide promised “plug-and-play convenience,” but Arman had learned to trust manuals only after a skeptical sigh and a cup of coffee.

Part 7: Software-Specific Configurations

Error 3: AutoShop Test Fails – “Timeout Error”

• Cause: Wrong COM port or baud rate mismatch.
• Solutions:
  • Go back to Device Manager. Confirm the COM port hasn’t changed (it might shift if you moved the USB cable to another port).
  • Check the PLC’s DIP switches. Some XC-series PLCs have switches to set communication protocol. Ensure it’s set to “USB/RS232” not “RS485”.
  • In AutoShop, try lowering the baud rate to 9600.