Wis09abgn Driver Windows 10 May 2026

To use the Samsung WIS09ABGN LinkStick (802.11a/b/g/n Wireless USB Adapter) on Windows 10, you must manually install compatible drivers, as Samsung originally designed this device for 2009–2011 TVs and Blu-ray players. Recommended Driver for Windows 10 Ralink RT2850/RT3572

chipset. While Samsung does not provide a dedicated Windows 10 executable, the following drivers from DriverScape MediaTek (Ralink) are reported to work: Ralink RT3572 802.11a/b/g/n Wireless LAN USB Device (Version 5.01.09.0000 or newer). Linksys WUSB600N v2

drivers are also functionally compatible with this hardware. Step-by-Step Manual Installation

Since Windows 10 may not recognize the adapter automatically, follow these steps to force the driver installation:

Why Windows 10 Doesn’t Automatically Install It

Microsoft removed native support for several legacy Ralink chipsets after Windows 8.1. While Windows 10 includes generic drivers for many adapters, the wis09abgn chipset often falls through the cracks—especially in 64-bit versions or after major updates like the Windows 10 Anniversary Update (version 1607) and later.

9. Frequently Asked Questions (FAQ)

Q: Is the Wis09abgn a 5GHz adapter? A: Some variants support 5GHz, but most original Wis09abgn adapters are 2.4GHz only (802.11b/g/n). Check your hardware specs.

Q: Why does my Wis09abgn work on Windows 7 but not Windows 10? A: Windows 10 dropped support for the old NDIS 5.1 driver model. You need a newer NDIS 6.0 compatible driver, which the Ralink RT3070 v5.0+ driver provides.

Q: Can I use a generic Mediatek driver? A: Yes. MediaTek now owns Ralink. The MediaTek MT7601 or RT2870 drivers often work universally.

Q: My adapter is detected but scanning for networks is very slow. A: This is a known issue. In Device Manager > Wis09abgn Properties > Advanced tab:

  • Set Wireless Mode to "802.11 b/g" (disable N).
  • Set Channel to "Auto".
  • Disable Bluetooth coexistence if available.

Solving the wis09abgn Driver Issue on Windows 10: A Complete Guide

If you’ve recently upgraded to Windows 10 or performed a clean installation, only to find your Wi-Fi has vanished, you may have stumbled upon a cryptic device in Device Manager labeled wis09abgn. This identifier refers to a common but often misidentified wireless network adapter. Getting the correct driver for it can be frustrating, but this guide will walk you through everything you need to know.

Step-by-Step Installation:

Prerequisites: You will need an alternative internet connection (Ethernet cable, USB tethering from a phone, or another PC to download the driver).

Step 1: Download the Correct Driver Navigate to a reliable driver repository (e.g., Station-Drivers or the official MediaTek legacy archive). Search for: "Ralink RT2870 USB driver Windows 10".

  • Recommended file: Look for version 5.01.26.0000 or 5.1.25.0 – these are WHQL-certified for Windows 10.
  • Avoid "driver updater" software – they often contain bloatware or malware.

Step 2: Extract the Driver Files Do not run an installer if it doesn't exist. Most legacy Ralink drivers are distributed as a .zip or .7z archive containing .inf, .sys, and .cat files. Extract them to a folder on your Desktop (e.g., C:\Wis09abgn_Driver).

Step 3: Open Device Manager

  • Right-click the Start button (or press Win + X).
  • Select Device Manager.
  • Locate Wis09abgn under "Other devices" (or sometimes under "Network adapters" with a yellow icon).

Step 4: Manually Update the Driver

  • Right-click Wis09abgn and select Update driver.
  • Choose "Browse my computer for drivers".
  • Click "Let me pick from a list of available drivers on my computer".
  • Click "Have Disk".
  • Click Browse and navigate to the folder where you extracted the driver files.
  • Select the file named netr28ux.inf or rt2870.inf (depending on the package).
  • Click Open, then OK.

Step 5: Ignore the Security Warning Windows may warn that the driver is unsigned or from an unknown publisher. Because this is a legacy Ralink driver, click "Install this driver software anyway" .

Step 6: Reboot After installation completes, restart your computer. Your Wi-Fi adapter should now appear as "Ralink 802.11n Wireless LAN Card" or similar, and the yellow exclamation mark will disappear.

6) Post-install checks

  • Verify wireless networks appear: click network icon in taskbar.
  • Confirm driver version: Device Manager → device → Properties → Driver tab → Driver Version / Provider / Date.
  • Test connectivity and transfer speeds; if unstable, try different driver versions (newer and sometimes older).

Post Title: Solved: WIS09ABGN Driver for Windows 10 (LG Laptop)

Posted by: TechSupport

Date: Today

The Problem: After upgrading to Windows 10, my LG laptop’s wireless adapter (listed as "WIS09ABGN" in Device Manager) stopped working. It shows a yellow exclamation mark, or Windows reports "The driver is not intended for this platform."

The Solution: Microsoft does not provide a native driver for the WIS09ABGN in Windows 10, and LG’s official support ended at Windows 7/8. However, the Broadcom BCM43231 driver works perfectly.

Step-by-step fix:

  1. Download the Driver:

    • Search for Broadcom BCM43231 Windows 10 driver OR
    • Download Driver 12.0.0.920 from a reputable laptop driver repository (e.g., Lenovo or Acer support sites for similar Broadcom chips).
    • Do not use auto-updaters – manual method works best.

  2. Manual Installation (Recommended):

    • Press Win + X → Device Manager.
    • Locate Other devices → WIS09ABGN (may show as "Network Controller").
    • Right-click → Update driver → Browse my computer for drivers.
    • Click Let me pick from a list of available drivers on my computer.
    • Select Network adapters → Next.
    • Click Have Disk → Browse.
    • Navigate to the extracted driver folder → Select bcmwl63a.inf (or similar .inf file) → Open → OK.
    • Choose Broadcom 802.11n Network Adapter from the list → Next.
    • Ignore the "Not recommended" warning → Yes.

  3. Alternate Method (if the above fails):

    • Use Snappy Driver Installer Origin (SDIO) – run only the network driver packs. It correctly identifies the WIS09ABGN as a Broadcom 802.11n.

  4. Final Step:

    • Reboot your laptop.
    • WiFi networks should now appear.

Troubleshooting:

  • Blue Screen (BSOD)? Roll back to driver version 5.100.235.12 or disable Bluetooth temporarily – some WIS09ABGN chips have Bluetooth conflict issues.
  • Driver still not loading? Run sfc /scannow in Command Prompt (Admin) to repair system files.

Works for: Windows 10 32/64-bit (1903 – 22H2 and 11 via compatibility mode).

Let me know below if you need the direct link to the working .inf file.

If you need just the short answer for a comment section: > "Install the Broadcom BCM43231 driver manually via 'Have Disk' in Device Manager. Use driver version 12.0.0.920. Works on all Windows 10 builds."

Installing and Troubleshooting the WIS09ABGN Driver on Windows 10

The WIS09ABGN is a wireless adapter that allows computers to connect to wireless networks. If you're using a computer with a WIS09ABGN adapter on Windows 10, you may encounter issues with the driver, which is the software that enables the adapter to communicate with the operating system. In this article, we'll guide you through the process of installing and troubleshooting the WIS09ABGN driver on Windows 10.

What is the WIS09ABGN Driver?

The WIS09ABGN driver is a software component that enables the WIS09ABGN wireless adapter to function properly on Windows 10. The driver acts as a translator between the adapter and the operating system, allowing you to connect to wireless networks and access the internet.

Installing the WIS09ABGN Driver on Windows 10

To install the WIS09ABGN driver on Windows 10, follow these steps:

  1. Download the driver: Go to the manufacturer's website (e.g., Intel or Atheros) and download the WIS09ABGN driver for Windows 10. Make sure to select the correct architecture (32-bit or 64-bit) and driver version.
  2. Extract the driver files: Extract the downloaded driver files to a folder on your computer, such as C:\Drivers\WIS09ABGN.
  3. Open Device Manager: Press the Windows key + X and select Device Manager from the menu.
  4. Locate the WIS09ABGN adapter: In Device Manager, expand the "Network Adapters" section and locate the WIS09ABGN adapter.
  5. Update the driver: Right-click on the WIS09ABGN adapter and select "Update driver". Then, select "Browse my computer for driver software" and navigate to the folder where you extracted the driver files.
  6. Install the driver: Follow the on-screen instructions to complete the driver installation.

Troubleshooting WIS09ABGN Driver Issues on Windows 10

If you're experiencing issues with the WIS09ABGN driver on Windows 10, try the following troubleshooting steps:

  1. Update the driver: Ensure that you're running the latest driver version. You can check for updates in Device Manager (as described above).
  2. Disable and re-enable the adapter: In Device Manager, right-click on the WIS09ABGN adapter and select "Disable device". Wait for 10 seconds and then enable it again.
  3. Reset TCP/IP stack: Go to the Command Prompt (as administrator) and run the following commands: netsh int ip reset and netsh winsock reset.
  4. Run the Network Troubleshooter: Go to Settings > Update & Security > Troubleshoot > Additional troubleshooters > Network Adapter.

Common Issues and Solutions

Here are some common issues you may encounter with the WIS09ABGN driver on Windows 10, along with their solutions: wis09abgn driver windows 10

  • No internet connection: Ensure that the WIS09ABGN adapter is enabled and that you're connected to a wireless network.
  • Driver not found: Download and install the latest driver version from the manufacturer's website.
  • Wireless network not detected: Restart your computer and router, and try reconnecting to the wireless network.

Conclusion

The WIS09ABGN driver is a crucial component for wireless connectivity on Windows 10. By following the installation and troubleshooting steps outlined in this article, you should be able to resolve common issues and maintain a stable wireless connection. If you're still experiencing issues, consider seeking further assistance from the manufacturer's support team or a professional technician.

If you are trying to get your Samsung WIS09ABGN LinkStick to work on Windows 10, you have likely realized that official drivers for modern operating systems are non-existent. Because this adapter was designed for 2009-era Samsung TVs, it uses legacy hardware that Windows 10 doesn't always recognize out of the box.

Here is how you can get this vintage adapter up and running on a modern PC. The Technical Reality The Samsung WIS09ABGN is essentially a rebranded Ralink RT2870

wireless chipset. Since Samsung never released official Windows 10 drivers for a TV accessory, the trick is to use the "Generic" Ralink drivers that correspond to the internal hardware. How to Install the Driver on Windows 10 Identify the Chipset : Plug the adapter into your USB port. Open Device Manager , right-click the "Unknown Device," and select Properties Hardware Ids from the dropdown. You are looking for a string like USB\VID_04E8&PID_2018 Download Ralink RT2870/RT3572 Drivers

: Since Ralink was acquired by MediaTek, look for the "MediaTek (Ralink) RT2870" driver package. Many community forums and driver repositories host these legacy files. Manual Installation Right-click the device in Device Manager and select Update Driver "Browse my computer for drivers"

"Let me pick from a list of available drivers on my computer."

and point it to the folder where you extracted the Ralink drivers. Select the Ralink RT2870 Series Wireless LAN Card (or similar) from the list. Ignore the Warning

: Windows will likely warn you that the driver is not digitally signed or may not be compatible. Click to proceed. Troubleshooting Common Issues Plug and Play

: Sometimes, Windows 10 will automatically install a "Generic USB Wireless" driver. If your connection is unstable, follow the manual steps above to force the Ralink-specific driver. USB 3.0 Incompatibility

: These older sticks sometimes struggle with USB 3.0 (blue) ports. If the device isn't recognized, try a USB 2.0 port Connection Speed

: Don't expect modern Wi-Fi 6 speeds. The WIS09ABGN is an 802.11a/b/g/n dual-band adapter, so it will cap out at older "N" speeds. Are you seeing a specific error code in Device Manager , or does the adapter not show up at all when plugged in?

What is the "Wis09abgn" Device?

Before diving into drivers, it is critical to understand what you are looking at. To use the Samsung WIS09ABGN LinkStick (802

The string "Wis09abgn" is not a brand name; it is a hardware ID alias used by generic USB 2.0 Wi-Fi adapters. Specifically, this ID corresponds to a Ralink RT3070 or RT5370 chipset.

  • WIS: Often stands for "Wireless Internet Solutions" or a generic OEM manufacturer code.
  • 09abgn: Refers to the Wi-Fi standards supported (802.11a, 802.11b, 802.11g, 802.11n).

In short: Wis09abgn is your Wi-Fi adapter. If the driver is missing, you cannot connect to wireless networks, even if Ethernet works fine.