To fully activate Vijeo Designer 6.2, you need a valid Reference Number (Part Number) and Serial Number. These credentials transition the software from a limited trial into a fully licensed environment for HMI development. 1. Locating Your Credentials
Your specific Reference and Serial Numbers are typically found in the following locations:
Physical Media: On the label of your DVD-ROM or USB flash drive.
Documentation: On the invoice or delivery note provided at the time of purchase.
Digital Delivery: In the confirmation email sent by Schneider Electric after an online purchase.
Common Reference Numbers for Vijeo Designer 6.2 include VJDSNDTGSV62M for a single license and VJDTNDTGSV62M for a team license (up to 10 stations). 2. The Activation Process
Once you have your numbers, follow these steps to register your software:
Installation: When running the setup.exe, enter your Serial and Reference numbers when prompted by the wizard.
Launch License Manager: Open Vijeo Designer and go to Help > License Manager.
Request License File: Click "Request License File" and fill in your user information. vijeo designer 6.2 reference and serial number
Activation: Choose Online Activation if connected to the internet. If you are offline, you will need to generate a request file and send it to your local Schneider Electric Support Center to receive an Authorization Code. 3. Finding Existing Serial Numbers
If the software is already installed and you need to recover the serial number:
Runtime License Manager: Launch the Vijeo Designer Runtime License Manager from the Start menu. Navigate to "Enter received Authorization code" and click OK; the next dialog box will display the serial number used during registration.
Registry Check: Advanced users can find license information in the Windows Registry under HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\Schneider Electric\Vijeo-Designer62\06.20\License\. 4. Running Without a Serial Number Vijeo Designer 6.2 Serial Number - Facebook
Vijeo Designer 6.2 Reference and Serial Number Guide Navigating the installation and registration process for Schneider Electric's HMI configuration software, Vijeo Designer 6.2, requires a clear understanding of the reference and serial numbers. These identifiers determine your software’s functionality and licensing level. 1. Locating Your Serial and Reference Numbers
To license Vijeo Designer 6.2, you need both a Reference Number (the part number) and a Serial Number.
Physical Media: These numbers are typically printed on a label on the DVD-ROM sleeve or the USB flash drive case.
Digital Purchase: If you purchased a digital license, look for these details in your confirmation email or on the invoice and delivery note.
Registered Installations: If the software is already installed, you can find the serial number by launching the Vijeo Designer License Manager from the Start menu and navigating to the "Enter received Authorization code" section. 2. Standard Reference Numbers for Vijeo Designer 6.2 To fully activate Vijeo Designer 6
Depending on your license type, you will use one of the following official Reference Numbers: Single User License: VJDSNDTGSV62M Team License (10 Users): VJDTNDTGSV62M Facility License (Unlimited Site Users): VJDFNDTGSV62M Standard PC Runtime: VJDSNRTSPC 3. Installation Modes
The combination of numbers you enter during the InstallShield Wizard determines the software's mode:
Limited Edition: Leave both the Reference and Serial Number blank. This allows full configuration but only supports downloading to HMISTO and HMISTU series HMIs.
Trial Mode: Use Reference Number VJDSNDTGSV62M and any 11-digit numeric serial number (e.g., 01234567890). This grants full functionality for 21 days.
Fully Licensed: Enter the unique purchased numbers to remove all time and download restrictions. 4. Activation and Registration Process
Once the software is installed, you must activate it to ensure permanent access:
To license Vijeo Designer 6.2 , you need both a Reference Number (the part number) and a Serial Number
. These are typically found on the software's physical DVD sleeve or in the confirmation email sent after purchase. Schneider Electric Product Reference Numbers (Part Numbers)
Depending on the license type you purchased, use the corresponding reference number: Single License: VJDSNDTGSV62M Team License (10 Users): VJDTNDTGSV62M Facility License (Unlimited Site Users): VJDFNDTGSV62M USB Cable License: VJDSUDTGAV62M Schneider Electric How to Find Your Serial Number Security and compliance considerations
If you have already installed the software and need to retrieve your registered serial number:
Q1: Can I use a Vijeo Designer 6.5 serial number to install Vijeo Designer 6.2? A: No. Serial numbers are version-specific. A reference for 6.5 uses a different encryption algorithm. You must obtain a genuine 6.2 serial.
Q2: My HMI asks for a "Project Serial Number." What is that?
A: This is a security feature. In Vijeo Designer, go to Project > Protection > Serial Number Lock. You can set a custom 12-digit number that must match the HMI’s serial to run. This is not the software license.
Q3: Is it legal to use a "cracked" serial number for Vijeo Designer 6.2? A: No. Schneider Electric actively audits manufacturing facilities. Using an illegitimate reference violates copyright law and voids your support contract. Additionally, cracked versions often contain malware or cause runtime crashes.
Q4: How do I find the reference number on a Magelis HMI that is already running?
A: On the HMI touchscreen, navigate to System Panel > About > Product Reference. This gives the hardware reference (e.g., HMIGTO5310), not the software license.
Q5: Does Vijeo Designer 6.2 require an internet connection to validate the serial number? A: No. Version 6.2 uses offline activation (dongle or file-based). No Schneider server communication is required, which is why many isolated industrial plants still prefer it.
Symptoms: You try to open a .vjd project file, and Vijeo Designer 6.2 says the "Referenced panel is not supported."
Cause: The project was created with a different runtime serial number or a newer version of the software.
Fix: You need to change the target panel reference in the project settings:
Project > Station > Target – Manually select the Magelis model you have. This does not require a new serial number.