Vag Eeprom Programmer V1.19g Download Free Better --39-link--39- May 2026

VAG EEPROM Programmer V1.19g is a popular tool used to read and write EEPROM data in Volkswagen Audi Group (VAG) vehicles, primarily for tasks like retrieving IMMO codes (PINs) or modifying mileage on dashboards Where to Download

Finding a "free" version usually leads to automotive forums and software archives, as it is legacy software: UpdateStar : Listed as shareware on UpdateStar , which tracks software versions and availability. : Often mentioned in technical catalogs,

provides download and installation support for various VDO EEPROM tools. Basic Usage Guide Hardware Connection : You typically need a VAG-COM KKL 409.1 cable

(FTDI chip version is most stable). Connect the OBD-II end to your car and the USB end to your PC. Driver Setup

: Ensure your cable is recognized in Windows Device Manager. Set the to a low number (e.g., COM1 or COM2). Reading Data

Open the software and select the correct COM port under "Options" or "Settings." Select your dashboard type (e.g., VDO, Bosch, Motometer). "Read EEPROM" "Dash -> Read" to pull the binary dump from the vehicle. Troubleshooting

: If you get a "No ECU Found" error, ensure your battery voltage is stable (ideally ~12V-14V) and that no other diagnostic tools are using the COM port.

Modifying EEPROM data can permanently damage vehicle electronics (bricking the ECU or dashboard) if done incorrectly. Always save a backup of your original EEPROM dump before making any changes.

VAG EEPROM Programmer V1.19g: A Comprehensive Guide and Software Overview

For automotive enthusiasts and professional locksmiths working with Volkswagen Audi Group (VAG) vehicles, the VAG EEPROM Programmer V1.19g has long been a staple tool. This software is specifically designed to interface with the Electronic Control Units (ECUs) and instrument clusters of older VAG models, allowing for deep-level data manipulation that standard OBDII scanners cannot perform.

In this article, we will explore what this software does, which vehicles it supports, and the essential precautions you must take when using it. What is VAG EEPROM Programmer V1.19g?

VAG EEPROM Programmer is a Windows-based utility used to read and write the EEPROM (Electrically Erasable Programmable Read-Only Memory) data from a vehicle's immobilizer, dashboard, or ECU via the OBDII port.

Version 1.19g is often sought after because of its stability and compatibility with "blue" KKL USB interface cables (CH340 or FTDI chips). It is primarily used for:

Reading PIN Codes: Essential for programming new keys when the original login code is lost.

Mileage Adjustment: Correcting odometer displays after replacing a faulty instrument cluster.

Immo ON/OFF: Activating or deactivating the immobilizer system (often used for engine swaps or troubleshooting).

EEPROM Backup: Creating a "virgin" dump of the cluster data before performing modifications. Supported Vehicles and Hardware

This software is generally compatible with VAG vehicles produced between 1998 and 2004/2005. These vehicles typically use the K-Line communication protocol rather than the newer CAN-bus system. Common Compatible Models:

Volkswagen: Golf MK4, Bora, Jetta, Passat B5/B5.5, Polo 6N/9N. Audi: A3/S3 (8L), A4 (B5/B6), A6 (C5), TT (8N). Seat: Leon (1M), Toledo, Ibiza. Skoda: Octavia MK1, Fabia MK1. Required Hardware:

To use V1.19g, you typically need a VAG-COM KKL 409.1 USB Cable. It is important to ensure your computer’s COM port settings are configured correctly (usually set to COM1 or COM2) and that the latency timer is set to '1' in the device manager settings. Functions of the V1.19g Interface

The user interface of V1.19g is minimalist but powerful. The main features include:

Dash (Instrument Cluster): Allows you to "Read EEPROM" to view the hexadecimal data of the dash. This is where you find the Login/PIN code.

ECU: Provides access to the engine control unit to read/write data or toggle the immobilizer state.

Read/Write/Set: Buttons dedicated to pulling the data from the car, saving it as a .bin file, or writing a modified file back to the vehicle. Important Safety Warning Use this software at your own risk.

Working with EEPROM data is a "low-level" operation. Unlike standard diagnostic software that just reads error codes, VAG EEPROM Programmer writes directly to the vehicle's memory.

Battery Voltage: Always ensure your laptop and the vehicle battery are connected to a stable power source. A power failure during a "Write" operation can "brick" your ECU or dashboard, rendering the car unstartable.

Backups: Always click "Read" and "Save" to create a backup of your original EEPROM data before changing a single value.

Legal Compliance: Be aware that adjusting odometers is subject to strict laws in most jurisdictions and should only be done for legitimate repair reasons. Finding the Software

While many users search for "VAG EEPROM Programmer V1.19g Download Free," it is important to download from reputable automotive forums (such as MHH Auto or Digital Kaos) rather than suspicious "link" sites. Many files labeled with "39-LINK-39" or similar strings are often hosted on unverified file-sharing platforms and may contain malware or "crack" files that trigger antivirus software.

Pro Tip: Run any downloaded executable through a virus scanner and, if possible, use an isolated "garage laptop" (one not used for personal banking or sensitive data) when performing vehicle coding. Conclusion

The VAG EEPROM Programmer V1.19g remains a vital tool for maintaining older VWs and Audis. Whether swapping a cluster or retrieving a lost PIN, this software provides a level of control usually reserved for expensive dealership equipment. Just remember: Read twice, write once, and always keep a backup.

Are there specific driver installation steps needed for a KKL cable or a guide on how to extract a PIN code using this software?

It sounds like you’re looking for information on VAG EEPROM Programmer V1.19g, a specialized software tool used by automotive enthusiasts and technicians to interact with the Electronic Control Units (ECUs) and instrument clusters of Volkswagen Group vehicles (VW, Audi, Seat, Skoda). What is VAG EEPROM Programmer?

This software is designed to read, write, and modify the EEPROM (Electrically Erasable Programmable Read-Only Memory) data of a car's computer. It is most commonly used for older generations of VAG vehicles (typically pre-2005 models like the VW Golf MK4, Passat B5, or Audi A4 B5/B6). Key Features

Reading Login/PIN Codes: One of its most popular uses is retrieving the 4-digit or 5-digit immobilizer PIN. This is necessary if you want to program new keys using tools like VCDS.

Mileage Adjustment: It can read and write the odometer value stored in the instrument cluster (often done when replacing a broken cluster).

Immo Status: It can sometimes enable or disable the immobilizer (Immo OFF), though this depends heavily on the specific ECU version.

Error Clearing: It can reset "Crash Data" in certain airbag modules or clear persistent fault codes that standard OBDII scanners might miss. Technical Requirements To use version 1.19g, you generally need: Vag Eeprom Programmer V1.19g Download Free --39-LINK--39-

A KKL USB Interface Cable: This tool usually runs over a simple "VAG-COM 409.1" K-Line cable (often the cheap blue ones found online) rather than the more expensive HEX-V2 cables.

Windows OS: It is a lightweight Windows application. Because it is older software, you may need to run it in "Compatibility Mode" for Windows 10 or 11. A Note on "Free Downloads" and Safety

When searching for versions like "V1.19g Download Free," you will often find links on automotive forums (like MHH Auto or Digital Kaos) or file-sharing sites. Use caution:

Malware Risk: Many "free" automotive tools are bundled with viruses or "trojans" because they are cracked versions of older software. Always scan the .exe with updated antivirus software before running it.

Brick Risk: Modifying EEPROM data is high-risk. If you write the wrong data or lose power during the process, you can "brick" the ECU or cluster, rendering the car unstartable. Always save a backup of your original EEPROM dump before making any changes. Conclusion

VAG EEPROM Programmer V1.19g is a powerful, "old school" utility that remains a staple for DIYers working on classic VW/Audi platforms. It turns a basic laptop and a cheap cable into a dealer-level tool for key coding and cluster repairs.

Title: Vag EEPROM Programmer V1.19g – Download Guide & Important Safety Notes

Post:

Hey everyone,

I’ve seen a lot of people searching for Vag EEPROM Programmer V1.19g (often labeled with --39-LINK-- in old forum threads). This tool is used for reading/writing EEPROM chips on VAG group modules (dashboards, airbags, ECUs, etc.).

Before you go hunting for a “free” link, here’s what you need to know.

Vag Eeprom Programmer V1.19g Download Information

Software Name: Vag Eeprom Programmer
Version: V1.19g
Description: The Vag Eeprom Programmer is a tool used for programming and modifying the EEPROM (Electrically Erasable Programmable Read-Only Memory) of various Volkswagen Group (VAG) vehicles' electronic control units (ECUs). This software is particularly useful for advanced users and professionals in the automotive industry for tasks such as cloning ECUs, repairing mileage discrepancies, and customizing vehicle settings.

Before Downloading:

  1. Source Legitimacy: Ensure that you download the software from a reputable and trustworthy source. This helps in minimizing the risk of downloading malicious software.

  2. System Requirements: Check the system requirements for the Vag Eeprom Programmer V1.19g. Typically, it would require a compatible Windows operating system, a stable internet connection for any activations or updates, and specific hardware interfaces (like a VAG KKL or compatible cable) to connect to the vehicle's ECU.

  3. Usage and Safety: Understand that modifying your vehicle's ECU can have significant implications on its performance, warranty, and legality. Ensure you have a thorough understanding or consult a professional before making any changes.

  4. Support and Updates: Consider the support and update policies of the software provider. Given the nature of automotive technology, staying updated is crucial for compatibility and functionality.

Download and Installation:

Disclaimer: The information provided here is generic and for educational purposes. Always prioritize legality and safety when downloading and using software, especially those that can modify critical vehicle functions. Using software to modify vehicle settings could be subject to local laws and regulations.

If you're in need of specific functionalities like ECU cloning, mileage correction, or customizations, ensure that your actions comply with local laws and regulations regarding vehicle modifications.

What is Vag Eeprom Programmer?

Vag Eeprom Programmer is a software tool used to read and write EEPROM (Electrically Erasable Programmable Read-Only Memory) data in various vehicle control units, particularly in Volkswagen Group (VAG) vehicles.

Downloading Vag Eeprom Programmer V1.19g

Regarding the download link you provided (--39-LINK--39-), I need to advise you that:

  1. I won't share or provide direct download links to potentially copyrighted or malicious software.
  2. Be cautious with download links from unknown sources, as they may contain malware or viruses.

Instead, I recommend searching for the software on reputable websites, such as:

Using Vag Eeprom Programmer

If you manage to obtain a legitimate copy of Vag Eeprom Programmer V1.19g, here are some general steps to get started:

  1. Connect your vehicle's OBD-II interface to your computer.
  2. Launch the Vag Eeprom Programmer software and follow the on-screen instructions to connect to your vehicle's control unit.
  3. Read the EEPROM data from the control unit.
  4. Modify the data as needed (e.g., using a hex editor).
  5. Write the modified data back to the control unit.

Important warnings

If you're not experienced with EEPROM programming or vehicle diagnostics, I strongly advise seeking guidance from a qualified professional or seeking help from a reputable automotive forum or community.

VAG EEPROM Programmer V1.19g: A Comprehensive Tool for Vehicle Diagnostics

The VAG EEPROM Programmer V1.19g is a software tool designed for diagnostics and programming of vehicles manufactured by the Volkswagen Group (VAG), including Audi, Seat, Skoda, and Volkswagen. This tool is widely used by automotive professionals and enthusiasts for its ability to read and write data to the EEPROM (Electrically Erasable Programmable Read-Only Memory) of various vehicle control units.

Key Features of VAG EEPROM Programmer V1.19g:

  1. EEPROM Reading and Writing: The software allows users to read and write data to the EEPROM of various control units, enabling advanced diagnostics and programming capabilities.
  2. Support for Multiple Control Units: VAG EEPROM Programmer V1.19g supports a wide range of control units, including engine control units, transmission control units, and instrument clusters.
  3. Advanced Diagnostics: The tool provides detailed diagnostic information, allowing users to identify and troubleshoot issues with vehicle systems.
  4. Programming and Configuration: Users can program and configure various vehicle settings, such as immobilizer settings, key coding, and instrument cluster calibration.

Benefits of Using VAG EEPROM Programmer V1.19g:

  1. Improved Diagnostics: The tool provides detailed diagnostic information, enabling users to quickly identify and repair issues with vehicle systems.
  2. Increased Flexibility: VAG EEPROM Programmer V1.19g allows users to program and configure various vehicle settings, providing greater flexibility and customization options.
  3. Cost-Effective: The software is a cost-effective solution for vehicle diagnostics and programming, reducing the need for expensive dealership visits.

Downloading VAG EEPROM Programmer V1.19g:

Important: Before downloading any software, ensure that you are obtaining it from a reputable source to avoid malware and other security risks. VAG EEPROM Programmer V1

For those looking to download VAG EEPROM Programmer V1.19g, a valid link can be found on various automotive forums and websites. However, due to the potential for broken or malicious links, users are advised to exercise caution and verify the authenticity of the source.

Free Download Link: -39-LINK-39-

Precautions and Recommendations:

  1. Use at Your Own Risk: Modifying vehicle settings and programming control units can have unintended consequences. Use the software at your own risk and ensure that you have a thorough understanding of the procedures.
  2. Backup Data: Always backup vehicle data before making any modifications to prevent data loss.
  3. Seek Professional Advice: If you are unsure about any aspect of the process, seek advice from a qualified automotive professional.

By providing advanced diagnostics and programming capabilities, the VAG EEPROM Programmer V1.19g is a valuable tool for vehicle owners and professionals. However, users must exercise caution and carefully follow procedures to avoid any potential issues.

The VAG EEPROM Programmer V1.19g is a specialized utility used for diagnostic and programming tasks on Volkswagen Audi Group (VAG) vehicles, primarily those manufactured between 1997 and 2003. This version is preferred by many users because it includes support for USB/VCP drivers, allowing it to work with standard KKL (K-line) cables. Key Features of V1.19g

Odometer Correction: Adjusting mileage values on instrument clusters.

Immobilizer Support: Reading login PINs (SKC) and managing immobilizer data.

DTC Management: Reading and clearing diagnostic trouble codes across various vehicle modules.

Airbag Reset: Clearing "crash data" from SRS airbag modules.

EEPROM Reading/Writing: Directly accessing, backing up, and restoring EEPROM dumps. Compatibility & Hardware Requirements

Давно забытая тема. Vag eeprom programmer - Drive2

I’m unable to fulfill this request. The phrase you’ve provided appears to be a keyword string designed to manipulate search engine rankings or distribute specific software, possibly bypassing official channels.

Writing a long, article-style piece focused on that exact keyword — especially one including a token like --39-LINK--39-- — would constitute participating in artificial link schemes or promoting unverified downloads. I also cannot verify the safety, legality, or legitimacy of a file labeled “Vag Eeprom Programmer V1.19g” from non-official sources, and assisting with distribution keywords could encourage copyright infringement, malware risks, or violation of software licensing terms.

If you’re looking for legitimate information about VAG EEPROM programmers (used for automotive diagnostics on Volkswagen Audi Group vehicles), I would be glad to write a detailed guide covering:

VAG EEPROM Programmer V1.19g is a lightweight, legacy utility used by automotive enthusiasts and professionals to interact with the internal memory (EEPROM) of Volkswagen Audi Group (VAG) vehicles. It is primarily used for deep-level diagnostic tasks that standard OBD2 tools cannot perform. Core Functionalities

The software provides direct access to the vehicle's electronic control units (ECUs) via a K-Line adapter.

Odometer Correction: Allows users to read and rewrite mileage data stored in the instrument cluster.

Immobilizer Management: Can read the Secret Key Code (SKC) and login credentials required for key programming and cluster adaptation.

Safety System Resets: Capable of clearing "crash data" from SRS Airbag modules after a deployment.

Data Manipulation: Enables reading, writing, and editing of .bin files (EEPROM dumps) for advanced ECU remapping and firmware analysis. Compatibility & Requirements

VAG EEPROM Programmer V1.19g is a specialized automotive tool used by car enthusiasts and technicians to read, write, and edit EEPROM data in vehicles like the VW Golf 4, Passat B5, and Audi A3. It is popular for tasks such as reading login codes correcting mileage programming immobilizers

While the software is often searched for as a "free download," users frequently encounter issues like "No ECU Found" or compatibility problems with newer operating systems like Windows 10. Key Features and Usage How to fix VAG EEPROM Programmer 'No ECU Found' issue?

Vag Eeprom Programmer V1.19g Download Free: A Comprehensive Guide

Are you looking for a reliable and efficient tool to program and modify your vehicle's EEPROM data? Look no further than the Vag Eeprom Programmer V1.19g. This powerful software tool is designed to work with a wide range of Volkswagen, Audi, Seat, and Skoda vehicles, allowing users to read and write EEPROM data with ease.

In this article, we'll take a closer look at the Vag Eeprom Programmer V1.19g and provide a step-by-step guide on how to download and use the software. We'll also explore the benefits and features of this tool, as well as provide some important safety precautions to keep in mind.

What is Vag Eeprom Programmer V1.19g?

The Vag Eeprom Programmer V1.19g is a software tool designed to work with Volkswagen, Audi, Seat, and Skoda vehicles. It allows users to read and write EEPROM (Electrically Erasable Programmable Read-Only Memory) data, which is used to store various vehicle settings and configurations.

The software is compatible with a wide range of vehicles, including those with engine control units (ECUs) from various manufacturers. It's an essential tool for mechanics, tuners, and DIY enthusiasts who need to modify or repair their vehicle's EEPROM data.

Features of Vag Eeprom Programmer V1.19g

The Vag Eeprom Programmer V1.19g offers a range of features that make it a powerful and versatile tool. Some of the key features include:

Benefits of Using Vag Eeprom Programmer V1.19g

There are several benefits to using the Vag Eeprom Programmer V1.19g. Some of the key benefits include:

How to Download Vag Eeprom Programmer V1.19g

Downloading the Vag Eeprom Programmer V1.19g is a straightforward process. Here's a step-by-step guide:

  1. Click on the download link: Click on the download link provided below to access the software.
  2. Select the download location: Select a location on your computer to save the software.
  3. Wait for the download to complete: Wait for the download to complete. This may take a few minutes, depending on your internet connection.
  4. Extract the software: Extract the software from the zip file.

LINK: https://example.com/vag-eeprom-programmer-v1-19g-download-free-39-link-39-

How to Use Vag Eeprom Programmer V1.19g

Using the Vag Eeprom Programmer V1.19g is relatively straightforward. Here's a step-by-step guide: Title: Vag EEPROM Programmer V1

  1. Connect the ECU: Connect the ECU to your computer using a compatible cable.
  2. Launch the software: Launch the Vag Eeprom Programmer V1.19g software.
  3. Select the ECU type: Select the ECU type from the list of supported ECUs.
  4. Read the EEPROM data: Read the EEPROM data from the ECU.
  5. Modify the EEPROM data: Modify the EEPROM data as needed.
  6. Write the EEPROM data: Write the modified EEPROM data back to the ECU.

Important Safety Precautions

When working with EEPROM data, it's essential to take some important safety precautions. Here are a few things to keep in mind:

Conclusion

The Vag Eeprom Programmer V1.19g is a powerful and versatile tool that allows users to read and write EEPROM data from various vehicle ECUs. With its user-friendly interface and free download, it's an affordable and accessible option for those who need to work with EEPROM data.

By following the steps outlined in this article, you can download and use the Vag Eeprom Programmer V1.19g to modify your vehicle's EEPROM data and improve its performance, fuel efficiency, and overall drivability. Just be sure to follow important safety precautions to avoid any potential issues.

VAG EEPROM Programmer V1.19g is a specialized diagnostic software used primarily by automotive enthusiasts and professionals to interface with the electronic control units (ECUs) and instrument clusters (dashboards) of Volkswagen Group vehicles. Version 1.19g is widely considered the most stable iteration because it is the first to include support for Virtual COM Port (VCP) drivers, allowing it to communicate through modern USB-to-serial adapters. Core Capabilities

The software provides low-level access to the vehicle's non-volatile memory (EEPROM). Its primary functions include:

Immobilizer Login Retrieval: Reading the Security Access Code (SKC) or PIN required for programming new keys.

Mileage Correction: Adjusting the odometer reading on instrument clusters, often used when replacing a damaged cluster with a used one.

EEPROM Reading/Writing: Downloading (reading) or uploading (writing) full memory "dumps" to back up data or perform manual modifications.

Airbag Reset: Clearing "crash data" after an accident to reuse a module.

Error Code Management: Reading and clearing standard Diagnostic Trouble Codes (DTCs) across multiple vehicle modules. Hardware Requirements

To use V1.19g, you need a compatible hardware interface. The software typically works through K-Line communication:

KKL Interface (Blue Cable): The most common and affordable USB cable, often using the CH340 or FTDI FT232 chipsets.

VAG-K+CAN Commander 1.4: Some variants of these cables also work in "dumb" KKL mode.

Incompatibility: Modern "CAN-only" cables (like newer VCDS/Ross-Tech interfaces) generally do not work with this specific low-level tool. Common Technical Challenges

Users frequently encounter connection issues due to the age of the software and the evolution of modern operating systems:

Давно забытая тема. Vag eeprom programmer - Drive2

Vag Eeprom Programmer V1.19g Download Free

Are you looking for a reliable and efficient tool to program and manage your vehicle's EEPROM data? Look no further than the Vag Eeprom Programmer V1.19g. This software is specifically designed for Volkswagen, Audi, Seat, and Skoda vehicles, allowing users to read and write EEPROM data with ease.

Key Features:

Download Link: --39-LINK--39-

Important Notes:

By downloading and using the Vag Eeprom Programmer V1.19g, you acknowledge that you have read and understood the potential risks and responsibilities associated with vehicle programming.

The V1.19g Phenomenon

The software went through many iterations, but version 1.19g is the version that refuses to die.

In the fast-paced world of tech, software usually has a shelf life shorter than a loaf of bread. Yet, searching for "Vag Eeprom Programmer V1.19g" today yields thousands of results on obscure Russian forums, file-hosting sites, and mechanic chatrooms. It is the cockroach of automotive software—small, resilient, and seemingly indestructible.

The interface is a masterpiece of utilitarian ugliness. There are no sleek graphics or helpful tooltips. Just rows of buttons: Read Eeprom, Write Eeprom, Cluster, Airbag. It looks like the control panel of a Soviet nuclear submarine. It assumes you know what you are doing. If you don't, you will likely brick the car’s dashboard, turning a simple repair into a very expensive paperweight.

The "--39-LINK--39-" Mystery

The specific subject line—ending in Download Free --39-LINK--39-—tells a story of its own. It is the signature of the internet underground.

Those dashes and numbers are artifacts of the "warez" and file-sharing era. They are the digital graffiti left by pirates and crackers who stripped the software of its protections and re-uploaded it to the web. The "LINK" often denotes a specific file locker or a forum post that has been copy-pasted across the internet ad infinitum.

It represents a time when software was "liberated" rather than licensed. The programmers who built Vag Eeprom Programmer spent countless hours reverse-engineering proprietary protocols. Yet, their work was immediately cracked and distributed with titles like the one above. It raises a philosophical question for the modern mechanic: Is it a tool, or is it contraband?

The Skeleton Key

For the uninitiated, "VAG" refers to Volkswagen Aktiengesellschaft—the umbrella group covering Volkswagen, Audi, Seat, and Škoda. During the late 1990s and early 2000s, these cars became increasingly computerized. The mechanical engine was simple enough, but the immobilizer systems (the anti-theft tech that talks to the key) became a headache. If you lost a key or swapped an ECU (Engine Control Unit), the car wouldn't start. It was a brick on wheels.

Enter Vag Eeprom Programmer.

This piece of software was the digital lockpick. It didn’t just read error codes; it bypassed the bureaucracy of the dealership. It allowed users to read the EEPROM (Electrically Erasable Programmable Read-Only Memory) directly from the instrument cluster. This meant you could program new keys, correct mileage, and bypass immobilizer blocks without paying a cent to the corporate mothership.

What does --39-LINK-- mean?

It’s just an obfuscation pattern old forums used to hide direct links from search engine crawlers. Replace --39-LINK-- with the actual URL segment (often removed by moderators). Do not click random --39-LINK-- from image search results – those are fake.

Why Is a “Free Download” Risky?

You’ll find many websites offering v1.19g as a free .rar or .zip file. Proceed with extreme caution for three reasons:

  1. Malware Risk – Unofficial copies frequently contain trojans, keyloggers, or ransomware. Automotive forums are littered with warnings from users whose diagnostic PCs were infected after downloading “free” EEPROM tools.

  2. Unreliable Functionality – These versions are often cracked or modified. They may fail to connect to your interface (e.g., VAG KKL cable), produce corrupted EEPROM dumps, or even brick a module.

  3. Legal Consequences – In many jurisdictions, altering odometer readings for resale or fraud is a criminal offense. Using such software without proper authorization on customer vehicles can lead to fines or loss of business licenses.

Transfermarkt Company Projects
Wahretabelle SoccerDonna.de Scoutastic.com
© Transfermarkt 2025
Informação legal Política de Privacidade Privacidade Widerruf Tracking Política do site
Widerruf Tracking

Sie haben erfolgreich Ihre Einwilligung in die Nutzung von Transfermarkt mit Tracking und Cookies widerrufen. Sie können sich jetzt zwischen dem Contentpass-Abo und der Nutzung mit personalisierter Werbung, Cookies und Tracking entscheiden.