Usb Device Id | Vid 1e3d Pid 198a Updated !!exclusive!!

The USB hardware identifier VID 1E3D / PID 198A corresponds to a Chipsbank Microelectronics Co., Ltd. generic mass storage device, typically a USB flash drive or card reader. Device Profile

Vendor ID (VID): 1E3D (Chipsbank Microelectronics Co., Ltd.). Product ID (PID): 198A (Generic Flash Disk / HighSpeed). Device Type: USB 2.0 Mass Storage Device.

Controller: Often utilizes the CBM2199E or CBM2199S controller chips.

Performance: Typically offers read speeds between 10–48 MB/s and write speeds between 3–17 MB/s, depending on the flash memory quality. Driver & Troubleshooting

This device uses the standard USB Mass Storage Class driver included with most operating systems (Windows, macOS, Linux). If the device is not appearing: usb device id vid 1e3d pid 198a updated

USB Flash Drive Speed Tests - VID = 1e3d, PID = 198a - NirSoft

Step-by-Step: Manual Driver Installation Using the VID/PID

If you still see an unknown device, here is the manual override:

  1. Open Device Manager.
  2. Find the device with the yellow exclamation. It may be under Other devices as “Unknown device.”
  3. Right-click it > Properties > Details tab.
  4. In the Property dropdown, select Hardware Ids.
  5. Confirm you see USB\VID_1E3D&PID_198A.
  6. Right-click the device again > Update driver > Browse my computer for drivers.
  7. Click Let me pick from a list of available drivers on my computer.
  8. Select Camera (or Imaging devices) from the list.
  9. Choose USB Video Device (Microsoft generic) or Integrated Camera (if listed).
  10. Click Next and let it install.

Note: The Microsoft generic driver is often less featured but highly stable. Many users report that the “updated” generic driver works better than the OEM one.

Force Disable Driver Signature Enforcement (Windows 10/11)

  1. Restart your PC while holding Shift.
  2. Go to Troubleshoot > Advanced Options > Startup Settings > Restart.
  3. Press 7 or F7 for "Disable driver signature enforcement".
  4. Manually reinstall the driver again.

USB Device Update: VID 1E3D & PID 198A

Status: Firmware/Driver Update Analysis

Problem 2: Error Code 10 (Device Cannot Start)

Cause: Conflicting driver residue from older installs.

Fix:

  1. In Device Manager, right-click the device > Uninstall device.
  2. Check the box Delete the driver software for this device.
  3. Restart your computer.
  4. Let Windows reinstall the updated driver automatically.

Step 1: Identify the Physical Device

Since the VID/PID alone does not reveal the product name, physically inspect your USB ports:

  • Unplug all non-essential USB devices.
  • Plug the suspected device back in.
  • Open Device Manager (Windows + X > Device Manager).
  • Look under Universal Serial Bus devices or Other devices for an entry with a yellow triangle.
  • Right-click > Properties > Details tab > Hardware Ids drop-down. Confirm it reads USB\VID_1E3D&PID_198A.

Method 4: Roll Back to a Previous Updated Driver

If a recent Windows update broke your device, the “updated” driver you need might actually be an older version that was stable: The USB hardware identifier VID 1E3D / PID

  1. Open Device Manager.
  2. Expand Cameras (or Imaging devices).
  3. Right-click your device (it may show as “Unknown” with the VID/PID in Details).
  4. Select Properties > Driver tab.
  5. Click Roll Back Driver (if enabled).
  6. If grayed out, click Update Driver > Browse my computer > Let me pick from a list > select the previous version.

3. The Camera Stopped Working After a Windows Feature Update

Microsoft’s major updates (22H2, 23H2, 24H2) frequently break older camera drivers. The "updated" driver you need is one that complies with the latest Windows Driver Framework (WDF) requirements.

Summary

The USB Device with Vendor ID (VID): 1E3D and Product ID (PID): 198A is recognized as a Chipsbank (Chicory) Microcontroller based device, commonly found in budget USB flash drives and microSD card readers.

If you saw an "updated" status for this device, it likely relates to:

  1. Driver Auto-Update: Windows Update pushed a generic USB mass storage driver.
  2. Firmware Change: The device was reflashed (e.g., using CBM209X or CBM2199量产工具).
  3. Mode Switch: The controller switched from "Production/Factory mode" to "Normal mode" after flashing.