This appears to be a technical error message or a specific log entry related to Siemens SINAMICS S210 or G210 drive systems using the Startdrive or Web server interface.
Since this error usually occurs during commissioning or firmware updates, 🛠️ Potential Causes
Version Mismatch: The Startdrive (TIA Portal) version is inconsistent with the drive firmware.
Corrupted Data: The configuration package download was interrupted.
Web Server Error: The drive's internal web server failed to generate the required model package.
Hardware Compatibility: Attempting to load a configuration into an incompatible hardware revision. ✅ Troubleshooting Steps 1. Synchronize Firmware and Software
Check TIA Portal: Ensure you have the latest Hardware Support Packages (HSP) installed for your specific drive model.
Firmware Update: Download the latest firmware for your ACX-based drive (e.g., S210) from the Siemens Industry Online Support (SIOS) portal. 2. Reset the Drive to Factory Settings If the internal model container is stuck or corrupted: Perform a Factory Reset via the Web Server or TIA Portal. Power cycle the drive (DC link and 24V supply). Attempt the download again. 3. Clear Browser Cache (If using Web Server) If you are commissioning via a web browser: Clear your browser's cache and cookies.
Try a different browser (Chrome or Edge are generally recommended). Ensure JavaScript is enabled. 4. Check SD Card Integrity
If the drive uses a Memory Card, ensure it is not write-protected. This appears to be a technical error message
Verify the card is a genuine Siemens card and has sufficient free space. Try re-formatting the card (only using Siemens tools). 🔍 Specific Documentation
For the exact "ACX model configuration" error, refer to the SINAMICS S210 Operation Manual. Look for: Section: "Faults and Alarms"
Message ID: Look for associated hex codes (e.g., 0x...) that appear alongside the text.
If so, please provide the Article Number (e.g., 6SL...) found on the drive's nameplate.
It looks like you're referring to a Siemens Drive Technology context — specifically something related to:
siemens.mc.drives.acx.model.configuration (likely a package or container in SINAMICS or SIMOTION engineering frameworks like SCOUT or Startdrive)data.package container downloadThis typically points to:
When you click "Download to Drive" in Siemens engineering tools (like TIA Portal with Startdrive or Starter), you aren't just moving a file. You are executing a complex transaction involving:
In the Siemens software architecture (specifically the siemens.mc.drives namespace), this data is not stored as a flat list. It is stored in a DataPackage Container.
The ability to perform a siemens.mc.drives.acx.model.configuration data.package container download is a mandatory skill for any motion control engineer working with SINAMICS drives. It transforms drive management from a fragile, manual parameter list into a robust, repeatable, and safety-compliant process. siemens
By using the ACX model, you gain:
Whether you are downloading a container for the first time or recovering from a mysterious F13150 fault, following the structured approach outlined in this guide will ensure a successful outcome. Always remember: the container is not just data – it is the complete digital identity of your drive.
For further reading, refer to Siemens function manual “SINAMICS S120 Commissioning Manual” (6SL3097-4AA00-0RP3) – Chapter 5: ACX Container Handling.
Keywords used naturally in this article:
siemens.mc.drives.acx.model.configuration data.package container download, SINAMICS, TIA Portal, Startdrive, ACX model, drive parameterization, safety integrated, firmware update, batch download, container troubleshooting.
The package Siemens.mc.drives.acx.model.configuration Data.package Container is a component of the SINAMICS Startdrive commissioning software, integrated within the TIA Portal.
This specific "PackageContainer" error typically appears when attempting to open a TIA Portal project created with a version of Startdrive or a SINUMERIK toolbox that is not currently installed on your engineering station. How to Resolve the Missing Package
To resolve this issue and download the necessary files, follow these steps:
Identify Your Version: Check which version of TIA Portal the project was created in (e.g., V15, V16, V17). You must install the corresponding version of Startdrive.
Download SINAMICS Startdrive: The most reliable way to obtain these missing configuration packages is to download the full SINAMICS Startdrive installer from the official Siemens SiePortal. For V15.1: Startdrive V15.1 Download For V17: Startdrive V17 Download This typically points to:
Install SINUMERIK Toolboxes: If your project involves SINUMERIK controllers (like the 840D sl or One), you may also need the SINUMERIK STEP 7 Toolbox, which contains additional PackageContainer files for drive configuration.
Updates and Support Packages: Ensure you have installed the latest Updates and Support Packages (HSP) for your TIA Portal version, as these often include updated device descriptions for newer drive hardware.
Note on "ACX": The "ACX" in the package name refers to the internal drive model architecture used by Siemens for SINAMICS S-series and G-series drives within the TIA environment.
What version of TIA Portal are you currently using to open this project?
Problem opening a project in TIA Portal – missing package files
The terms DataPackage and Container in this context usually refer to the internal object-oriented structure used to manage configuration data (parameters, topology, and firmware mappings) before it is serialized and downloaded to the drive.
Here is an interesting guide regarding the DataPackage Container Download, explaining the background, the technical "Container" concept, and how to leverage it for advanced configuration.
Before we dive into the download process, we must understand the acronym ACX. ACX stands for Automation Component eXchange. It is a Siemens proprietary data format designed to encapsulate drive parameters, communication settings, and application-specific function modules into a single, portable container.
The siemens.mc.drives.acx.model.configuration is essentially the XML-based schema that defines the topology and parameters of a motion control (MC) drive unit. This model includes:
The "configuration data package container" is the delivery mechanism—a compressed, digitally signed archive that TIA Portal and STARTER use to import or export complete drive setups.
.acx or .pkg container file acquired from:
SINAMICS DCC or Startdrive.download ready state (no active faults, inhibit commands off).