APC UPS Blog - ExcessUPS.com

Service Tool V1074 Canon Mp250 !free! Download Link May 2026

The Canon Service Tool v1074 is a specialized utility designed to manage internal printer functions, most notably for resetting the waste ink absorber counter (also known as the "pampers" reset) on older PIXMA models like the Canon MP250. When this counter reaches its limit, the printer often displays critical errors like P07 or E08, effectively locking the device until it is reset. Understanding the Canon Service Tool v1074

This software is primarily intended for authorized service technicians but is frequently sought by DIY users to extend the life of their hardware. service tool v1074 canon mp250 download link

Step 1: Enter Service Mode

Before opening the software, you must put the printer into Service Mode manually. The Canon Service Tool v1074 is a specialized

  1. Ensure the printer is turned OFF but the power cable is plugged in.
  2. Press and hold the Resume/Cancel button (the button with the triangle inside a circle).
  3. While holding the Resume button, press and hold the Power button. The green light should turn on.
  4. Keep holding the Power button, but release the Resume button.
  5. While still holding the Power button, press the Resume button 5 times.
    • Note: For some MP250 units, pressing it 6 times is required. If 5 doesn't work, try 6.
  6. Release the Power button.
  7. The printer should now be in Service Mode. The LED screen will be blank or show "0," and the computer should detect "New Hardware" (Canon MP250).

Step 2: Run the Reset Tool

  1. Extract the downloaded ZIP file.
  2. Right-click the Service Tool v1074.exe file and select Run as Administrator.
  3. In the "USB Port" section of the tool, select the USB port connected to your printer. If it is blank, the printer is not in service mode (repeat Step 1).
  4. Look for the "Ink Absorber Counter" section on the right side of the window.
  5. Under "Absorber," select Main.
  6. Click the "Set" button.
  7. Wait a moment. The tool will send the command to the printer.
  8. You will see a message saying "A function was finished" or similar.
  9. Click "Quit" to close the tool.

The Version Confusion: Why V1074?

Canon has released many versions of this tool (V2000, V3400, etc.), but V1074 remains a staple search term for older models like the MP250. Step 1: Enter Service Mode Before opening the

The Review Verdict on Compatibility:

  • The Good: V1074 is highly stable for the MP250 series. It generally communicates well with the hardware, provided the printer is in "Service Mode."
  • The Bad: Newer versions of the tool often drop support for older printers. Conversely, older versions of the tool often refuse to run on Windows 10 or 11. V1074 sits in a sweet spot, though it often requires running in "Compatibility Mode" for modern PCs.

6.4 Performing a Firmware Upgrade

  1. Select the printer entry in the device tree.
  2. Click “Firmware → Upgrade”.
  3. Browse to the .bin file you verified earlier.
  4. Review the pre‑flight checks (checksum, compatible hardware revision).
  5. Press “Start”.
  6. The progress bar shows two phases: Upload (data transfer to printer) and Flash (writing to internal flash).
  7. Do not power off the printer during this process; doing so will brick the device.

After completion, the printer automatically restarts and reports the new firmware version in the status window.