SeisImager registration password is a unique 40-digit code provided by Geometrics to activate the full version of the software. To verify and register your license, you must provide a
generated by your specific PC to the support team, who will then issue the permanent password. The Registration and Verification Process The activation of SeisImager
software follows a strict security protocol to link a specific license to a user's hardware. Initial Launch & Keyword Generation
: Upon first installing the software, you are typically presented with a 12-digit code
. If you are already running in demonstration mode, you must navigate to the SeisImager Registration program via the Windows Start menu to find this keyword. Requesting the Password : You must email this keyword along with your order number (found on your invoice) and the serial number of your seismograph to support@geometrics.com Entering the Password
: Once received, the 40-digit registration password is entered into the "password" or "registration ID" field within the registration tool. Verification
: After clicking "OK" or "Register," the software confirms the registration. A successful verification message will appear, and the program will update from "Demonstration" to the purchased version (e.g., ), lifting the data input and launch limits. Understanding SeisImager Software Packages
SeisImager is a comprehensive suite used for seismic data analysis, including refraction and surface wave studies. The registration password you receive depends on the specific package purchased: Lite Version : Often included with Geometrics seismographs , allowing limited interpretation and traces. Standard Version
: Supports common commercial applications with higher limits for samples and interpretation. Professional Version
: Offers virtually unlimited input capabilities for large-scale geophysical surveys. Demonstration Mode : Allows users to test the software for up to 15 launches
without a registration password, though functionality like printing and large data interpretation is restricted. License Transfers
The registration is essentially a "softkey dongle." To transfer a verified license to a new PC, you must first "Transfer" or "Deregister" the ID on the original machine to make it available for the new one. This process requires an internet connection to communicate the removal of the license from the first device. step-by-step guide on how to transfer an existing registration to a new computer SEISIMAGER/SW USER'S MANUAL
In SeisImager software, "registration password verified" (or similar "registered" messages) indicates that the license code provided by Geometrics has been successfully entered and validated, unlocking the full version of the software modules from demonstration mode. Registration Process Overview
To reach a verified state, users typically follow these steps: seisimager registration password verified
Locate Registration Program: Go to the Windows Start menu under All Programs > SeisImager to find the SeisImager Registration program.
Obtain a Keyword: Open the registration window to find a unique "Keyword" generated by your specific PC installation.
Request Password: Email this Keyword, along with your order number and seismograph serial number, to support@geometrics.com.
Enter the Password: Once you receive a 40-character alphanumeric registration ID or password from support, paste it into the password field and click OK.
Verification Message: The software will report the specific packages enabled (e.g., "SeisImager/2D Standard is registered"). Clicking Accept completes the process. Key Modules Unlocked
Once verified, you gain full access to specialized modules based on your purchase: Pickwin: For editing waveforms and picking first arrivals.
Plotrefa: The main analysis and inversion module for refraction data.
WaveEq & GeoPlot: Used for surface wave (MASW) data analysis. PSLog: Specifically for downhole seismic data modeling. Troubleshooting & Support SEISIMAGER/2D USER'S MANUAL
The registration method has evolved over time to ensure secure access to various modules like SeisImager/2D, SeisImager/SW, and SeisImager/DH.
Registration ID (Modern System): For versions released after May 2021, users receive a unique Registration ID, typically found on the customer invoice or order acknowledgement.
To verify, users go to the SeisImager Registration Tool on their PC and enter this ID while connected to the internet.
Keyword & Password (Legacy System): Older versions (prior to May 2021) generate a unique Keyword upon launching the software for the first time.
Users send this keyword to Geometrics Support via email, and in return, receive a Registration Password to unlock the full features. SeisImager registration password is a unique 40-digit code
Demonstration Mode: If a password is not entered, the software defaults to a demonstration version, allowing a total of 15 launches with limited capabilities. Key Locations & Support
For physical hardware purchases or localized support, Geometrics operates through several international hubs:
Geometrics Inc. (HQ): Located in San Jose, California, handles global sales and primary software support.
Geomatrix Earth Sciences: The European representative based in Leighton Buzzard, UK, providing local rentals and technical assistance.
Laurel Geophysical Instruments: The primary contact for users in Beijing, China. Expand map
This guide outlines the process for registering SeisImager software (including SeisImager/2D and SeisImager/SW) and verifying your password to unlock the full version from demonstration mode. 1. Locate Your Software Credentials
Before starting, ensure you have the following information from your Order Acknowledgement or PDF invoice: Order Number: Found on your sales documents.
Seismograph Serial Number: Required if the software was purchased with hardware. Registration ID: For versions released after May 2021. Keyword: For older versions (prior to May 2021). 2. Initiate the Registration Program
If you are currently running in Demonstration Mode, follow these steps to access the registration interface: Open the Windows Start Menu. Navigate to All Programs/All Apps > SeisImager. Select the SeisImager Registration program. 3. Obtain Your Password or ID
Depending on your software version, the verification process differs: For Newer Versions (May 2021 and Later) Step: Copy the Registration ID from your invoice.
Action: In the SeisImager Registration window, select "I have a registration ID," paste your ID, and click Register.
Search Tool: If you cannot find your ID, use the Geometrics Registration Search by entering your order number. For Older Versions (Pre-May 2021)
Keyword Generation: Open the registration program to see a unique 12-digit Keyword generated for your PC. Step 2: Generate the Registration Request
Email Request: Send an email to support@geometrics.com containing your Keyword, Order Number, and Seismograph Serial Number.
Receipt: Geometrics will reply with a 40-digit registration password. 4. Verify the Password Once you receive your password or ID: Open the SeisImager Registration program again. Enter the 40-digit code into the Password field. Click OK.
Verification: A message will appear stating "SeisImager is already registered" or reporting the specific registered packages. 5. Confirm License Activation To ensure the password was verified correctly: Launch a module (e.g., Pickwin).
The software should no longer report a "limited number of available run-times" or "demonstration mode".
The Dimension size dialog box should now reflect the full limits of your purchased version rather than demonstration limits. Troubleshooting Tips
Administrator Rights: You must have Administrator privileges on your Windows PC to register or change registration settings.
Internet Connection: Your PC must be connected to the internet to verify a Registration ID. Once verified, the software can be used offline.
Manual Entry: While you can enter passwords in the "Dimension size" dialog box during a program upgrade, it is strongly recommended to use the dedicated SeisImager Registration tool for standard activation.
For further technical support, you can contact Geometrics Customer Service at support@geometrics.com.
Title: Secure User Authentication in SeisImager: Password Verification and Registration Protocol
Objective:
This paper outlines the password verification process during user registration for SeisImager – a software suite for seismic refraction and surface wave analysis. The goal is to ensure that only authorized users gain access while maintaining data integrity and system security.
Help → Register (or License → Registration depending on version).RegRequest.txt file to your desktop. This file contains your computer’s hardware ID.A: Pickwin and Plotrefa share the same license file. Verify in one program, and the other will automatically unlock. If not, check that both executables are pointing to the same ProgramData folder.
👉 [Log in now] and start your first project.
Need help? Our support team responds within 12 hours – because even the best velocity models need a QC check.
ProgramData.license.lic or reg.dat is missing or read-only.Why it happens: SeisImager uses a hidden background process (licmgr.exe or similar) to store the verified status. Antivirus software may quarantine it.
Solutions: