Upgrading the software on your Satlink WS-6979 Go to product viewer dialog for this item. (or the Go to product viewer dialog for this item.
variant) is a critical maintenance step to ensure compatibility with modern transmission standards like H.265/HEVC and to improve signal locking sensitivity. Upgrade Prerequisites Before beginning, ensure you have the following: USB Flash Drive: Formatted to FAT32.
Latest Firmware File: Usually a .bin file provided by an official distributor or the manufacturer's support site.
Power Source: Ensure the 7.4V/3000mAh battery is at least 50% charged or connect the device to the DC Adaptor to prevent a power-off during the process, which can "brick" the meter. Step-by-Step USB Upgrade Procedure Most modern Satlink combo meters, including the , support upgrading directly via the onboard USB port.
Satlink WS-6979SE Digital Satellite Finder Meter User Manual
Subject: SATLINK WS-6979 Software Upgrade – Important Instructions
Dear User,
This notice provides guidance on upgrading the software for your SATLINK WS-6979 digital satellite meter. Keeping your device updated ensures optimal performance, access to new features, and compatibility with the latest satellite transponders.
Before You Begin:
Upgrade Steps:
Download the firmware
.bin or .upd file for the WS-6979 (do not use files for other models).Copy to microSD card
WS6979.bin).Install on the device
Do not interrupt
Verify
Troubleshooting:
Important Notes:
For further assistance, refer to the user manual or contact SATLINK technical support.
Best regards,
[Your Name / Support Team]
An article about Satlink Ws-6979 Software Upgrade will be created. Satlink WS-6979 Software Upgrade: The Complete Guide
The Satlink WS-6979 is a staple tool for satellite and terrestrial TV technicians. This combo meter handles both DVB-S2 and DVB-T2 signals. To keep it running at peak performance, a periodic software upgrade is essential.
Updating your meter ensures compatibility with new broadcast standards, fixes software bugs, and often improves battery efficiency. This guide covers everything you need to know about upgrading your Satlink WS-6979. Why Upgrade Your Satlink WS-6979?
Keeping your device firmware up to date is not just about getting new features. It directly impacts your daily work efficiency.
Updated Satellite Transponders: Satellite frequencies change frequently. New software includes updated pre-configured satellite lists.
Bug Fixes: Manufacturer updates resolve known system freezes and calculation errors.
Improved Spectrum Analyzer: Firmware patches often increase the refresh speed and accuracy of the spectrum analyzer.
Better Battery Management: New code can optimize power consumption during heavy DVB-T2 scanning. Essential Pre-Upgrade Checklist
Before you begin the upgrade process, you must prepare your device. Failing to do so can result in a "bricked" or permanently damaged meter.
Check Battery Level: Ensure your battery is at least at 70% capacity. Never update while the battery is low.
Use a Reliable USB Drive: Use a high-quality USB flash drive formatted to FAT32. The WS-6979 usually cannot read NTFS or exFAT formats.
Backup Your Data: If you have custom satellite lists or saved positioner data, back them up to your PC first.
Verify Firmware Version: Go to the device settings and check your current hardware and software version. Never install firmware meant for a different hardware revision. Step-by-Step Software Upgrade Process
Updating the Satlink WS-6979 is straightforward if you follow these steps carefully. Step 1: Download the Correct Firmware
Locate the official firmware file. It usually comes in a .bin or .abs format. Ensure the file specifically mentions support for the WS-6979 model. Using firmware for a WS-6906 or WS-6933 will corrupt your device. Step 2: Prepare the USB Drive Plug your USB drive into your computer. Format it to FAT32.
Copy the downloaded firmware file directly to the root folder of the USB drive. Do not put it inside any folders. Step 3: Connect to the Meter Power off your Satlink WS-6979.
Insert the USB flash drive into the USB port located on the side of the meter. Power the meter on. Step 4: Execute the Upgrade Press the Menu button on your keypad.
Navigate to the System Setup or Tools menu (depending on your current UI version). Select Upgrade by USB or S/W Upgrade. Select the file type (usually "All Code" or "Firmware"). Select the upgrade file you placed on your USB drive. Press OK to start the process. Satlink Ws-6979 Software Upgrade
Warning: Do not touch any buttons or remove the USB drive while the progress bar is moving. The device will automatically reboot once the installation is complete. Troubleshooting Common Upgrade Issues
If you encounter issues during or after the upgrade, consult these common solutions. Meter Won't Read the USB Drive
Solution: Ensure the drive is smaller than 32GB and formatted strictly to FAT32. Try a different USB brand if the issue persists. Upgrade File Not Found
Solution: Check that the file is not zipped. You must extract .rar or .zip files on your computer before moving the .bin file to the USB. Device Stuck on Boot Logo
Solution: This indicates a corrupted flash or wrong firmware version. You may need to recover the device using an RS232 serial cable and specialized loader software on a PC. Final Recommendations
After a successful reboot, it is highly recommended to perform a Factory Reset from the menu. This clears out any conflicting cache data from the old operating system. Once reset, you can start fresh or reload your saved satellite channel lists. Find the latest official download links Learn how to fix a bricked device via RS232 Get a guide on loading custom satellite lists
To draft a feature for the Satlink WS-6979 software upgrade, focus on enhancing its core combo signal analysis and USB functionality. Feature Concept: "Cloud-Sync Transponder Library"
This feature would streamline the software upgrade process by allowing the USB port to not only update firmware but also automatically sync the latest satellite transponder data from a cloud-based repository. 🚀 Key Capabilities
Auto-Update Transponders: Automatically replaces outdated frequency lists when a USB drive with a "sync file" is inserted.
Profile Backup: Saves custom dish alignments and saved satellite positions to the USB before performing a full firmware flash.
Integrity Check: Scans the firmware file on the USB to prevent "bricking" the unit due to corrupted downloads.
Dual-Band Optimization: Dedicated presets for both DVB-S2 (Satellite) and DVB-T2 (Terrestrial) that update simultaneously. 🛠 Technical Highlights
USB 2.0 Integration: Uses the existing USB port for high-speed data transfer.
Real-time Progress Bar: Visual feedback on the 4.3" TFT LCD screen during the decoding and flashing process.
Rollback Protection: Allows the user to revert to the previous software version if the new update causes signal locking issues. 💡 User Benefit
Installers can skip the manual entry of new frequencies (NIT search), ensuring their meter is always ready for the latest Foxtel/VAST or international broadcasting standards. If you'd like to proceed with this draft, would you prefer: A technical specification list? A marketing blurb for a product update? A user guide section on how to perform the upgrade?
Satlink WS-6979SE Digital Satellite Finder Meter User Manual
The Satlink WS-6979 is a high-definition combo digital satellite finder designed for DVB-S/S2 and DVB-T/T2 signals. Keeping its software updated ensures the latest satellite frequency databases and hardware performance improvements. Updating via USB (Standard Method)
For modern versions of the WS-6979, the upgrade is typically handled directly through the unit's USB port.
Prepare the USB Drive: Format a standard USB flash drive to FAT32.
Download Firmware: Locate the latest firmware file (often with a .bin extension) from a reliable source or official manufacturer support.
Transfer File: Copy the firmware file to the root directory of your USB drive.
Connect to Device: Plug the USB drive into the WS-6979's USB port, usually located on the side of the unit. Run the Update: Power on the device. Navigate to the System or Upgrade menu.
Select the firmware file from the USB drive and confirm the start.
Completion: The device will typically restart automatically once the process is complete. Important Precautions
Power Stability: Do not turn off the device or disconnect the power source during the upgrade process.
Battery Check: Ensure the battery has at least 50% charge or connect the unit to the power adapter during the update.
Factory Reset: It is often recommended to perform a factory reset after a major software update to ensure all new settings are applied correctly. Satellite Data Management
Beyond firmware, you can also update specific satellite parameters (TP/SAT lists). This is often done using PC-based software like SatlinkTools, which may require an RS-232 connection for older or specific hardware revisions.
Satlink WS-6979SE Digital Satellite Finder Meter User Manual
Upgrading the software on your Satlink WS-6979 combo meter is
a straightforward process primarily handled via the device's
. Keeping the firmware updated ensures the device remains compatible with the latest satellite transmission standards (DVB-S/S2/T/T2/C) and improves signal locking sensitivity. Upgrade Requirements USB Flash Drive: Formatted to FAT32. Latest Firmware File: Typically a
file provided by the manufacturer or authorized distributors. Power Supply:
Ensure the 7.4V/3000mAh battery is fully charged or the unit is connected to its power adapter to prevent a shutdown during the update. Step-by-Step Upgrade Process Prepare the USB Drive: Download the correct firmware for the
. Extract the files if they are in a compressed folder (e.g., .zip) and move the file to the root directory of your USB drive. Connect to Device: Upgrading the software on your Satlink WS-6979 Go
Insert the USB drive into the USB port located on the side of the meter. Navigate to Menu: Power on the Satlink and enter the main System Setup Select Software Upgrade:
Look for an option labeled "Software Upgrade" or "USB Upgrade." Select Firmware File: The device should detect the file on your USB drive. Select it to begin the process. Flash the Firmware:
Confirm the update when prompted. The meter will display a progress bar. Do not turn off the power during this stage, as it can brick the device. Auto-Restart:
Once the update is 100% complete, the device will automatically restart. Factory Reset (Optional but Recommended):
After the reboot, it is often recommended to perform a factory reset in the system settings to ensure all new software features are properly initialized. Benefits of Updating Expanded Decoding: Support for updated codecs like MPEG-2 / H.265 (8-bit).
Improved AZ/EL angle calculations and spectrum analyzer performance. Database Updates: New pre-loaded satellite and TP (Transponder) data.
For official manuals and technical specifications, you can refer to the Satlink S.L. Device Database ManualsLib specific version of the firmware, or are you having trouble with the device not recognizing the USB drive? Update Guide for Satlink WS-6906 | PDF - Scribd
Upgrading the software (firmware) on your Satlink WS-6979 is a straightforward process typically performed via the device's USB port
. Keeping your firmware updated ensures the internal satellite database—which can include over 1,200 satellites—remains accurate and compatible with modern DVB standards. Essential Upgrade Preparation
Before beginning the upgrade, ensure you have the following ready: A Compatible USB Flash Drive
: Use a FAT32-formatted USB drive for the best compatibility with the meter's USB 2.0 interface Correct Firmware File : Verify that the firmware file (often an
file) is specifically designed for the WS-6979 model, as using firmware for different models can cause system failure. Battery Power
: Ensure your 7.4V/3000mAh battery is at least 50% charged or connect the DC12V/1.5A adapter
to prevent the device from losing power during the flash process. Upgrade Procedure (Step-by-Step) Load the Firmware
: Copy the downloaded upgrade file to the root directory of your USB flash drive. Connect to Meter
: Power on the Satlink WS-6979 and insert the USB drive into the data service port Access System Settings : Use the physical buttons to navigate to the menu and select the Software Upgrade Confirm Update
: Locate the file on your USB drive through the meter's interface and press Do not power off the device
during the transfer; doing so can "brick" the meter, making it unusable. Factory Reset (Optional but Recommended)
: Once the update is complete and the device reboots, performing a factory reset
ensures the new system parameters are correctly initialized. Benefits of the WS-6979 Upgrade Expanded Codec Support : Updates often improve performance for H.265 (10-bit) and MPEG-4 hardware decoding. Improved Signal Lock : Firmware patches can refine the accuracy of the Spectrum and Constellation analyzers Updated Satellite Lists
: New firmware often includes the latest transponder data for DVB-S2/T2/C
standards, reducing the need for manual entry during dish alignment. or instructions on how to manually add a new satellite to your current database?
Satlink WS-6979 Satellite & Terrestrial TV Signal Meter - Sciteq
设置 (Settings) → 语言 (Language) → English.Document Version: 1.0
Target Device: Satlink WS-6979 (all hardware revisions up to v3.1)
The Satlink WS-6979 Go to product viewer dialog for this item.
supports software upgrades directly via its USB 2.0 port. This handheld combo meter uses a Novatek microprocessor and supports file management systems like FAT32 and NTFS, which are typically required for the device to recognize update files on a flash drive. Upgrade Requirements Storage Device: A USB flash drive formatted to FAT32.
Firmware File: A valid .bin or .img update file specifically for the WS-6979 model.
Power: Ensure the 7.4V/3000mAh battery is fully charged or the unit is connected to the DC 12V/1.5A power adapter to prevent power loss during the flash process. Standard Upgrade Procedure
Prepare the USB: Download the latest firmware from a verified provider and save the file to the root directory of your USB drive.
Connect: Insert the USB drive into the Data Service Port (USB) on the side of the meter.
Navigate Menu: Power on the device and enter the System Setup or Tools menu using the 4.3-inch TFT LCD interface.
Select Upgrade: Choose the Software Upgrade (sometimes labeled "USB Upgrade") option.
Start Flash: Select the firmware file from the USB list. The device will typically display a progress bar. Do not turn off the device until it restarts automatically, as this can brick the unit. Troubleshooting & Technical Notes Port Compatibility: The
features a standard USB 2.0 interface; if the drive is not recognized, try a smaller capacity drive (e.g., 8GB or 16GB) formatted specifically to FAT32.
Factory Reset: It is often recommended to perform a factory reset after a successful upgrade to ensure all new system parameters are applied correctly.
Verification: Check the "Version" or "System Info" section in the menu after rebooting to confirm the new software version is active. Satlink WS-6979 Confirm your current software version (Menu → System
Satlink WS-6979 Satellite & Terrestrial TV Signal Meter - Sciteq
The Satlink WS-6979 Go to product viewer dialog for this item.
software upgrade is an essential maintenance task for technicians and satellite enthusiasts to ensure their combo meter remains compatible with the latest broadcast standards, including DVB-S2, DVB-T2, and DVB-C. Updating the firmware allows the device to recognize new satellite transponders, improves signal sensitivity, and fixes bugs that may affect the accuracy of the spectrum or constellation analyzers. Preparation for the Upgrade Before starting, gather the following necessary tools:
A Windows PC: Most Satlink upgrade tools are designed for Windows environments.
USB Cable or RS-232 Cable: Depending on your specific hardware version, the WS-6979 typically supports upgrades via its USB 2.0 port or a specialized RS-232 serial connection.
Firmware File: A valid .bin or image file specifically for the WS-6979 model.
Satlink Upgrade Tool: Software such as SatlinkTools or specialized updater programs often found on manufacturer support sites. Step-by-Step Upgrade Process
Most Satlink models follow a standardized procedure for firmware updates: Connect the Device: Connect your Satlink WS-6979
to your PC using the appropriate cable while the meter is powered on.
Launch the Software: Open the Satlink upgrade program (e.g., SatlinkTools) on your computer. If using Windows 7 or newer, it is recommended to run the program as an administrator.
Establish Connection: Ensure the software detects the COM port. If it fails to connect, check your cable and drivers.
Select Firmware: Click the "Load Software" or "Browse" button and navigate to your downloaded .bin upgrade file.
Start the Update: Confirm the selection to begin the flashing process. Caution: Never turn off the meter or disconnect the cable during the upgrade, as this can permanently brick the device.
Restart: The device will typically restart automatically once the process is complete (usually taking about 1 to 2 minutes). Key Benefits of Keeping Software Current
H.265 Decoding Support: Newer firmware versions ensure proper hardware decoding for MPEG-4 H.265 (8-bit or 10-bit) signals, which are increasingly common in HD broadcasting.
Updated Satellite Lists: Updates refresh the internal database of satellites and transponders, saving you from manual entry.
Enhanced Calibration: Periodic updates can improve the device’s internal auto-calibration for more accurate signal-to-noise (S/N) and power level readings.
Satlink WS-6979 Satellite & Terrestrial TV Signal Meter - Sciteq
A very specific topic!
I've conducted a search, and while I couldn't find a specific paper on the "Satlink WS-6979 Software Upgrade", I did find some relevant information that might interest you:
If you're interested in learning more about the Satlink WS-6979 software upgrade, I recommend trying the following:
Before handling cables and download links, you must understand what an upgrade actually does. Many users operate on a "if it ain't broke, don't fix it" mentality. With satellite meters, that is a mistake. Here is why you should perform a Satlink WS-6979 software upgrade today:
Warning: An improper upgrade can brick your device. Read every step before proceeding.
After thorough preparation, follow these precise steps. The MicroSD method is widely considered the safest.
Step 1: Format the SD Card Insert your SD card into the PC. Right-click the drive > Format. Select File System: FAT32. Allocation unit size: Default. Click Start.
Step 2: Transfer the Firmware
Copy the downloaded firmware file (e.g., ws6979_v2.0.upd) directly to the root directory of the SD card. Do not put it inside a folder.
Step 3: Power Cycle the Satlink Turn off the WS-6979 completely using the side power switch. Wait 10 seconds.
Step 4: Insert SD Card Insert the prepared SD card into the slot on the side of the WS-6979.
Step 5: Initiate Upgrade Mode Hold down the "OK" button on the front panel. While holding OK, flip the power switch to ON. Keep holding OK until you see the screen flicker and display: "Upgrade Mode" or "Bootloader v1.0".
Step 6: Automatic Detection The device will automatically scan the SD card. It will display:
"Found update file: ws6979_v2.0.upd. Update firmware? [YES] [NO]"
Step 7: Execute the Upgrade Press OK (YES). The screen will show a progress bar: Erasing... Writing... Verifying...
Crucial: Do not touch the device. Do not cut the power. If the bar freezes for more than 10 minutes, you risk a brick, but usually it takes 2-3 minutes.
Step 8: Completion & Reboot Upon completion, the screen will say "Update Success! Reboot?" Press OK. The device will restart. Wait for the main satellite finder screen to appear.
Step 9: Factory Reset (Highly Recommended) After the upgrade, old configuration remnants can cause glitches.
0000 (default).If you own a Satlink WS-6979 digital satellite finder/meter, you know it is a reliable workhorse for installing and aligning satellite dishes. However, to keep up with new satellite transponders, improved blind scan algorithms, and bug fixes, keeping the firmware updated is essential.
In this guide, I’ll walk you through the entire process of upgrading the software on your Satlink WS-6979 safely and successfully.
⚠️ Disclaimer: Firmware upgrading carries a risk of bricking your device if done incorrectly. Follow these steps precisely. Ensure your device’s battery is fully charged or connected to stable power before starting.