Rda Usb Driver For Gallite 8809 64bit ~repack~

Title: SOLVED: Finding & Installing the RDA USB Driver for Gallite 8809 (Windows 10/11 64-bit)

Post Content:

Device: Gallite 8809 (Typically found in Chinese tablets, TV boxes, or E-readers) Chipset: RDA (RDA Microelectronics) – often an 881x series WiFi/BT combo or USB interface chip. Problem: Windows 10 or 11 64-bit fails to recognize the device, shows as "Unknown USB Device" or an exclamation mark in Device Manager due to missing drivers. rda usb driver for gallite 8809 64bit

Phase 4: Verifying the Port

Once installed, the device usually maps to a COM port, which is required for flashing tools. Title: SOLVED: Finding & Installing the RDA USB

  1. In Device Manager, expand the section Ports (COM & LPT).
  2. Look for an entry like:
    • RDA USB Diag Port (COMx)
    • SPRD USB2Serial Port (COMx)
  3. Note the COM number (e.g., COM3, COM5). You will need this for the RDA Flash Tool (Multi-Bundle Tool).

Part 7: Alternatives and Workarounds

If the RDA USB driver simply refuses to work on your 64-bit system, consider these alternatives: Phase 4: Verifying the Port Once installed, the

  1. Use a 32-bit Windows virtual machine: Install Windows 7 32-bit or Windows XP in VirtualBox or VMware. Pass through the USB device. 32-bit Windows has no driver signing enforcement.
  2. Linux solution: Many Gallite 8809 devices are natively supported by the Linux kernel via the dvb-usb-rdas module. Use a live Ubuntu USB to flash firmware without Windows drivers.
  3. Legacy hardware: Keep an old Windows 7 32-bit laptop specifically for flashing satellite receivers.

Step 4: Install the Driver via Device Manager

  1. Connect your Gallite 8809 device to the PC via USB.
  2. Open Device Manager (right-click Start button → Device Manager).
  3. Locate the unknown device – usually under Other devices as "Unknown device" or "RDA Device" with a yellow triangle.
  4. Right-click it → Update driver → Browse my computer for drivers.
  5. Click Let me pick from a list of available drivers on my computer.
  6. Click Have Disk → Browse.
  7. Navigate to the extracted driver folder and select the .inf file (usually rda881x.inf or rda_usb.inf).
  8. Click Open → OK.
  9. Select the RDA USB Device model from the list → Next.
  10. Click Install anyway if Windows warns about an unsigned driver.

Step 3: Disable Driver Signature Enforcement (Windows 10/11 64-bit only)

RDA drivers are not digitally signed for modern Windows versions. You must do this once before installation.

  1. Hold Shift while clicking Restart.
  2. Go to Troubleshoot → Advanced Options → Startup Settings → Restart.
  3. Press 7 or F7 to select Disable driver signature enforcement.

4. Alternative: Use generic RDA 8810 driver

Many Gallite 8809 adapters work with RDA 8810 driver (they share the same USB ID 148F:8809).
Try forcing installation of: