Radio Set Hx Prc 6020 Technical Data Install Today

Radio Set HX PRC 6020 Technical Data and Installation Guide

Introduction

The Radio Set HX PRC 6020 is a high-frequency (HF) radio communication system designed for tactical and strategic communication applications. This document provides technical data and installation guidelines for the Radio Set HX PRC 6020.

Technical Data

The Radio Set HX PRC 6020 is a modular, multi-mode radio system that operates in the HF frequency band (2-30 MHz). The system consists of several components, including:

  1. Receiver-Transmitter (RT-1523): The RT-1523 is the main component of the Radio Set HX PRC 6020. It is a solid-state, frequency synthesizer-controlled receiver-transmitter that provides amplitude modulation (AM) and single-sideband (SSB) modes of operation.
  2. Antenna: The Radio Set HX PRC 6020 uses a variety of antennas, including whip antennas, dipole antennas, and vehicle-mounted antennas.
  3. Power Supply: The power supply unit provides power to the RT-1523 and other system components.

Technical Specifications

The following technical specifications apply to the Radio Set HX PRC 6020:

  • Frequency Range: 2-30 MHz
  • Modes of Operation: AM, USB, LSB, and CW
  • Transmitter Output Power: 100 watts (PEP)
  • Receiver Sensitivity: Better than -123 dBm (AM), -130 dBm (SSB)
  • Antenna Impedance: 50 ohms

Installation Guidelines

The Radio Set HX PRC 6020 is designed to be installed in a variety of platforms, including vehicles, shelters, and fixed sites. The following installation guidelines should be followed:

  1. Site Selection: Choose a site with a clear line of sight to the intended communication area.
  2. Antenna Installation: Install the antenna in accordance with the manufacturer's instructions and local regulations.
  3. RT-1523 Installation: Mount the RT-1523 in a secure location, such as a rack or shelf.
  4. Power Supply Installation: Install the power supply unit in a well-ventilated area, away from other electronic equipment.
  5. Interconnecting Cables: Use shielded cables to interconnect the system components.

Installation Steps

The following steps should be followed during installation:

  1. Unpack and inspect the equipment: Verify that all components are included and undamaged.
  2. Mount the RT-1523 and power supply: Securely mount the RT-1523 and power supply unit in the designated location.
  3. Connect the antenna: Connect the antenna to the RT-1523.
  4. Connect the power supply: Connect the power supply unit to the RT-1523 and other system components.
  5. Perform system checks: Verify that the system is operating correctly and make any necessary adjustments.

Conclusion

The Radio Set HX PRC 6020 is a versatile and reliable HF radio communication system designed for tactical and strategic communication applications. By following the technical data and installation guidelines outlined in this document, users can ensure proper installation and operation of the system.

References

  • Manufacturer's technical documentation
  • Military standards and specifications
  • Local regulations and guidelines

Part 6: Maintenance After Installation

To keep the HX-PRC 6020 operating to its technical specifications:

  • Daily: Inspect antenna connector corrosion. Clean with DeOxit if needed.
  • Weekly: Perform a “Self-Test” (Menu → Diagnostics → Self Test). Pass criteria: all PASS.
  • Monthly: Re-torque all vehicle power lugs. Re-calibrate the frequency reference if drifted by > 200 Hz.
  • Post-submersion: Remove battery, rinse with distilled water, dry for 48 hours before re-inserting battery.

3. Installation & Integration Guide

Installing this radio into a vehicle or fixed site requires attention to grounding and power management.

A. Power Requirements

  • Input Voltage: Accepts 10-32 VDC.
  • Installation Tip: The radio is sensitive to voltage spikes. When installing in older vehicles (especially 24V military platforms), use the designated KDU (Keyboard Display Unit) or a filtered power adapter. Do not wire directly to unconditioned vehicle batteries without fuse protection.

B. Antenna Systems (Critical)

  • Multiband Tuning: Because the radio operates from 30 MHz to 512 MHz, no single antenna is perfect for all bands.
    • *For VHF Low (

stands out for its wide frequency range and robust sensitivity. It is designed to maintain clear communication where other systems might fail due to jamming or poor signal conditions Frequency Range: Operates from 1.5 to 29.9999 MHz with 10 Hz spacing, offering over 2.8 million channels. Operational Modes: Includes fixed frequency, dual-frequency simplex, and AutoCall (ALE) for automatic link establishment. Ruggedness: MIL-STD-810 E/F

environmental standards, it operates in extreme temperatures ranging from -40°C to +65°C Features advanced (digital encryption) and

(frequency hopping) to ensure secure voice and data transmissions. Data & Communication: "Beyond Simple Voice"

One of the most praised aspects of the 6020 series is its integration of modern data tools into a tactical radio. High-Speed Data: Supports data rates up to 4800 bit/s through a built-in modem. Flash Messaging: Includes a built-in data terminal for sending FLASH messages

and encoded text, which is vital for silent or low-bandwidth operations. Selective Calling:

Allows operators to target messages to specific individuals, groups, or the entire network, reducing radio clutter. Installation & Configuration: "Adaptive Mobility"

The system's modularity makes it highly versatile for different mission profiles, from foot patrols to fixed command centers. Man-Pack Setup: In its standard portable configuration, it delivers 20W of power and is designed for dismounted soldiers. Vehicular Installation (VRC-6020):

Can be "dropped in" as a replacement for legacy radios in vehicle mounts, utilizing existing amplifiers and antennas to reduce integration costs. Scalable Power:

While the man-pack is 20W, the system architecture allows for configurations up to 4000W (GRC-6800) for strategic fixed stations. Power Source: Typically powered by 12V, 15Ah lithium batteries

with a shelf life of over 5 years, ensuring the radio is ready for immediate deployment. HX-PRC 6020 is a top-tier choice for organizations requiring dependable HF communication . Its primary strength lies in its ALE capabilities high-speed data integration

, though its complexity may require dedicated training for operators to master its advanced programming menus. or specific antenna options available for this radio set? Tadiran HF-6000 - Elbit Systems UK

HX PRC-6020 (often part of the Tadiran HF-6000 family) is a high-frequency (HF) man-pack radio designed for tactical, multi-adaptive military communication. It is optimized for reliable voice and data transmission in harsh or jammed environments. ⚙️ Technical Specifications

The PRC-6020 provides robust long-range communication via the HF band: Frequency Range: 1.5 MHz to 29.9999 MHz.

2,850,000 channels with 10 Hz spacing (Standard: 285,000 channels at 100 Hz). Stores up to 100 preset channel parameters. Power Output: Selectable levels of 5W, 10W, or 20W Modulation: Supports USB, LSB, and AM modes. Receiver Sensitivity: -110 dBm (for 10 dB SINAD). Data Rates: Built-in modems support rates up to (standard) or higher with specialized waveforms. Environmental: Operational from -40°C to +65°C ; compliant with MIL-STD-810 E/F. 🛠️ Installation & Configuration

The PRC-6020 is designed for modular deployment across different platforms: 🎒 Man-pack (Portable) Power Source: Typically powered by a 12V, 15Ah LiSO2 (Lithium Sulphur Dioxide) battery pack.

Uses proprietary man-pack whip antennas or specialized NVIS (Near Vertical Incidence Skywave) antennas for tactical range. 🚜 Vehicular (VRC-6020) Configuration:

The man-pack unit slides into a vehicular mounting tray/amplifier adapter.

Draws from the vehicle's 24V DC supply (often with a 230V AC option for base stations). Amplification:

Can be boosted to higher power (up to 125W or 400W) when used in VRC-6200 or GRC-6400 configurations. 🛡️ Key Features & Modes Frequency-hopping capability to prevent jamming. Integrated digital encryption for secure voice and data. ALE (Automatic Link Establishment):

Supports MIL-STD-188-141A for automatic best-frequency selection. Built-in Test (BIT):

On-line and operator-initiated diagnostics down to the module level. Selective Calling: Address individual stations, groups, or the entire network. If you'd like, I can help you: pinout diagrams for the vehicle mounting kit. maintenance schedule based on MIL-STD guidelines. Compare this model with newer Software Defined Radios (SDR) What part of the installation process are you working on right now? PRC-6020 Radio Set Technical Overview | PDF - Scribd radio set hx prc 6020 technical data install

The HX PRC-6020 is a high-frequency (HF) man-pack radio designed for secure tactical voice and data communications. It is part of the Tadiran HF-6000 series and offers advanced features like frequency hopping and automatic link establishment. Technical Specifications Frequency Range: 1.5 MHz to 29.99999 MHz.

Channels: 2,850,000 channels with 10 Hz spacing; 100 preset channels available. Power Output: Selectable levels of 5W, 10W, or 20W. Modulation Modes: USB, LSB, and AM.

Data Transmission: Supports up to 4800 bit/s with digital encryption and frequency hopping capabilities. Receiver Sensitivity: -110 dBm (10 dB SINAD).

Weight & Dimensions: Weighs less than 5.5 kg including the battery; dimensions are approximately 360 x 255 x 100 mm.

Power Source: Typically powered by a 12V, 15Ah non-rechargeable Lithium Sulphur dioxide battery pack from manufacturers like BEL (Bharat Electronics Limited). Installation & Controls

Installation involves connecting essential peripherals to the main unit, as detailed in various PRC-6020 Technical Overviews:

Antenna Connectors: Separate connectors are provided for a Dipole (wire) antenna and a Whip antenna. Keypad Functions:

LITE/RST: Toggles display backlighting and acts as a "back" or "delete" key in menus. CLR: Switches the radio to "Clear" (unencrypted) mode. SEC: Switches the radio to "Safe" (secure/encrypted) mode. AJ: Activates anti-jamming or anti-disturbance modes.

Internal Components: The unit utilizes specialized hardware such as a Xilinx FPGA and a CR2032 coin cell battery for logic memory. HF man-pack radio 20 W (PRC-6020GV)

The HX PRC 6020 (part of the Tadiran HF-6000 series) is a tactical high-frequency (HF) man-pack radio designed for secure, long-range voice and data communications in modern battlefield environments. Capable of operating in dismounted, vehicular, or fixed-station roles, it serves as a multi-adaptive communication hub with built-in electronic counter-countermeasures (ECCM) and automated link establishment. Technical Data and Specifications

The system is built to provide reliable communications over the 1.5 to 30 MHz range with high frequency stability. Specification Details Frequency Range 1.5000 to 29.9999 MHz Channels 2,850,000 channels (10 Hz intervals) with 100+ presets Modulation Modes SSB (USB, LSB), AM, CW/MCW, AFSK Output Power Variable settings of 5W, 10W, or 20W Weight Less than 10 kg for the full man-pack unit Data Transmission

Up to 4800 bit/s; supports FLASH messages up to 1000 characters Operating Temp

-30°C to +55°C (standard); some batteries rated -40°C to +60°C Installation and Hardware Components

Installation varies by configuration—man-pack, vehicular (VRC-6020), or fixed station (GRC series). Key hardware interfaces include:

Antenna Connections: Features separate connectors for dipole/wire antennas and whip antennas, which can be configured via the keyboard menu.

Audio and Control: A standard audio connector supports control microphones, portable speakers, or headsets (150Ω to 600Ω impedance).

Data and Remote: An RMT/DATA connector allows for remote control (GRA-7400), connection to data terminals, or loading security keys and parameters.

Mounting and Chassis: Components include a brass power input pin, steel battery box locks, and aluminum hook fittings for body covers. Operational Features HX PRC 6020

emphasizes ease of use and security through several automated functions:

Automatic Link Establishment (ALE): Features "AUTOCALL" (up to 180 tables) and optional military-standard ALE protocols for rapid connection setup.

Security Modes: Includes clear and secure (Safe) modes, digital encryption, and an emergency deletion function for sensitive parameters.

Built-in Test (BIT): Allows for operator-initiated or automatic testing at the module level via the front panel.

Frequency Hopping: Includes 10 jump tables to provide resistance against jamming and interference. Power Management

The radio is typically powered by +12V DC nominal (10.8V to 14.4V). Common battery options include:

Rechargeable Li-ion: The TLI-9380E model provides 14.4V and 15Ah capacity, weighing approximately 1.5 kg.

Primary (Non-rechargeable): 12V 15Ah Lithium Sulphur Dioxide packs from BEL-India are used for extended missions, offering a 5-year shelf life. HX PRC 6020

against other tactical HF systems like the Harris Falcon III or Thales CNR? HF man-pack radio 20 W (PRC-6020GV)

(often referred to as the HX PRC-6020 in some regions) is a high-frequency (HF) man-pack radio set designed for reliable voice and data communications in tactical environments. Part of the broader HF-6000 series (Tadiran/Elbit Systems), it is engineered for secure, long-range operations on the modern battlefield. Elbit Systems UK Ltd Technical Specifications

The PRC-6020 provides robust performance across varied frequency modes and environmental conditions. Frequency Range: 1.5 MHz to 29.9999 MHz. Channel Spacing:

100 Hz (standard), with an option for 10 Hz spacing, allowing for up to 2,850,000 channels. Operating Modes: Fixed Operating Frequency (FOF). Dual-Frequency Simplex (DFS).

Frequency Hopping (ECCM) for secure communication against jamming.

Automatic Link Establishment (ALE) and "AUTOCALL" for rapid connection setup. Modulation:

Upper Side Band (USB), Lower Side Band (LSB), and Amplitude Modulation (AM). Output Power: Adjustable settings including 5W, 10W, and 20W. Data Capabilities:

Supports voice, telegraph, encoded messages, and data transmission at rates up to 4,800 bps. Receiver Sensitivity: -110 dBm (for 10 dB SINAD). Environmental Durability:

Tested to MIL-STD-810 E/F standards; operates in temperatures from Installation and Configuration

The PRC-6020 is a versatile unit that can be deployed in multiple configurations depending on the operational need. Elbit Systems UK Ltd Man-Pack (Portable):

The core PRC-6020 unit is used as a backpack system. It is powered by high-capacity battery packs, such as the 12V 15Ah Lithium Sulphur dioxide (LiSO2) battery, which operates reliably in extreme temperatures. Vehicular Installation:

By integrating with vehicular docking stations and power amplifiers, the man-pack becomes the Radio Set HX PRC 6020 Technical Data and

. This configuration typically uses the vehicle's power supply and may include external antennas for extended range. Fixed/Strategic Stations:

For long-range base operations, the unit can be configured as a

or higher, utilizing high-power amplifiers (ranging from 100W up to 4,000W) and specialized antenna solutions like NVIS (Near Vertical Incidence Skywave) to eliminate communication "skip zones". Antenna Connections:

Standard 50-ohm interfaces are used for connecting various tactical antennas. Key Features Built-In Test (BIT):

Automatically or operator-initiated diagnostics to ensure module-level health. Flash Messages: Capability to send up to 1,000 pre-defined quick messages. COMSEC/ECCM:

Robust digital encryption and frequency hopping to prevent eavesdropping and interference. Emergency Deletion:

Quick-zeroize function to wipe sensitive cryptographic parameters if the unit is at risk of capture. for frequency hopping tables or the antenna types recommended for NVIS operations? PRC-6020 Radio Set Technical Overview | PDF - Scribd

HX PRC-6020 (part of the Tadiran HF-6000 series by Elbit Systems

) is a tactical high-frequency (HF) man-pack radio designed for reliable voice and data communication in combat environments. Elbit Systems UK Ltd Technical Data Frequency Range: 1.5 to 29.9999 MHz. 2,850,000 channels with 10 Hz spacing; 100 preset channels. Modulation Modes:

Upper Side Band (USB), Lower Side Band (LSB), and Amplitude Modulation (AM). Operating Modes: Fixed Operating Frequency (FOF). Dual-Frequency Simplex (DFS). Automatic Link Establishment (ALE) and AUTOCALL. Frequency Hopping (ECCM) for secure communication. Power Output: Selectable at 5W, 10W, or 20W. Data Rate: Integrated modem supports up to 4800 bit/s. Environmental Standards:

Built to MIL-STD-810 E/F specifications; operational from -40°C to +65°C. Power Source:

Typically powered by a 12V, 15Ah non-rechargeable Lithium Sulphur dioxide (LiSO2) battery pack. Installation & Component Overview

The PRC-6020 is designed for versatility and can be configured as a backpack, vehicular, or fixed station. Antenna Connections: Whip Connector: For standard whip or wire antennas. Dipole Connector: For dipole or stationary wire antennas. User Interface: Visualizes menu screens for system configuration.

Five keys with dual functions (e.g., LITE for display illumination, CLR for clear mode, SEC for secure mode). Physical Setup:

For man-pack use, the radio is mounted in a dedicated harness with the battery pack secured to the base. Vehicular installation requires an external mounting tray (VRC-6020 configuration) and may interface with higher power amplifiers (up to 4000W for GRC series).

For detailed configuration beyond these basics, you can refer to technical overviews available on or manufacturer data from Bharat Electronics Limited (BEL) for a specific vehicular mount or programming instructions for the frequency tables? PRC-6020 Radio Set Technical Overview | PDF - Scribd

Technical Data:

  • Frequency Range: The AN/PRC-6020 operates in the VHF (Very High Frequency) range, with a frequency band of 30-88 MHz.
  • Channels: The radio set has 16 channels, with a channel spacing of 50 kHz.
  • Modulation: The radio uses Frequency Modulation (FM) for transmission and reception.
  • Transmitter Power: The transmitter output power is 5 watts.
  • Receiver Sensitivity: The receiver sensitivity is 0.8 μV for 10 dB SINAD (Signal-to-Noise and Distortion ratio).
  • Antenna: The radio set uses a whip antenna, which is a monopole antenna that can be extended to a length of 2.5 meters (8.2 feet).

Installation:

The AN/PRC-6020 radio set is designed to be a portable, tactical communication system. The installation process typically involves:

  1. Radio Unit: The radio unit is a compact, ruggedized device that can be carried by a single person. It is usually mounted on a belt or a harness.
  2. Antenna: The whip antenna is attached to the radio unit and extended to its full length for optimal performance.
  3. Power Source: The radio set is powered by a battery pack, which typically consists of 6 or 12 nickel-cadmium (Ni-Cd) batteries.
  4. Headset or Speaker: A headset or speaker is connected to the radio unit for audio communication.

Key Features:

  • Secure Communication: The AN/PRC-6020 radio set has a built-in security feature, which provides encryption for secure communication.
  • Squelch Circuitry: The radio set has a squelch circuitry that automatically mutes the receiver during periods of inactivity, reducing background noise.
  • Tone Signaling: The radio set supports tone signaling, which allows for selective calling and alerting.

Operating Instructions:

The AN/PRC-6020 radio set is typically operated in a push-to-talk (PTT) mode, where the user presses a button on the microphone to transmit and releases it to receive. The radio set can be used in a variety of modes, including:

  1. Simplex Mode: Direct, two-way communication between two radios.
  2. Duplex Mode: Communication through a repeater or a base station.

Maintenance and Troubleshooting:

The AN/PRC-6020 radio set requires regular maintenance to ensure optimal performance. This includes:

  1. Battery Maintenance: Checking and replacing batteries as needed.
  2. Antenna Maintenance: Inspecting and cleaning the antenna.
  3. Troubleshooting: Performing routine checks to identify and resolve issues.

Keep in mind that the AN/PRC-6020 is a military communication device, and technical data and documentation may be limited or restricted due to security concerns. The information provided here is based on publicly available sources and may not reflect the most up-to-date or accurate information.

The HX-PRC-6020 (often part of the Tadiran HF-6000 or HF-7000 family) is a tactical HF manpack radio designed for reliable and secure voice and data communication in combat environments. It operates across the 1.5 MHz to 29.9999 MHz frequency range. Technical Data & Specifications Specification Frequency Range 1.5 MHz to 29.9999 MHz Channels 100 Preset channels (up to 2,850,000 at 10 Hz spacing) RF Output Power Selectable: 5W / 10W / 20W Modulation USB, LSB, AM, CW Operating Modes Fixed Frequency, Frequency Hopping (ECCM), Clear/Safe Link Management Automatic Link Establishment (ALE) per MIL-STD-188-141A Power Supply +12 V DC Nominal (typically via 15Ah LiSO2 battery pack) Weight Less than 6.0 kg (including battery) Temperature Operating: -30°C to +55°C Components & Hardware

Transceiver Unit: The core body housing the Logic Circuitry (XC 3042A) and FPGA-based codec.

Battery Pack: A 12V, 15Ah Lithium Sulphur dioxide (LiSO2) pack, such as the BEL 12V 15Ah(PRC)

, which includes safety devices like a TCO, diode, and slow-blow fuse. Antenna Options: LATIGO 9P / 15P : Whip-style antennas for manpack mobile use. : Used for stationary long-range skywave communication. Installation & Configuration Guide Physical Setup:

Secure the battery pack to the base of the transceiver using the battery box lock and captive screws.

Connect the selected antenna (Whip or Dipole) to the 50 Ω antenna port. Startup & Initial Selection: Turn on the equipment and use the ENT key to access the main menu.

Navigate to the antenna selection menu using FNC and MORE to select the specific antenna type (e.g., ) to ensure proper impedance matching. Programming:

Channel Programming: Access the programming screen by entering code 10000 + ENT.

Security Keys: Load COMSEC/ECCM keys through the load screen via code 20000 + ENT for secure "Safe" or "AJ" (Anti-Jam) modes. Operational Verification:

Perform a Built-In Test (BIT), either automatic or operator-initiated, to verify module-level functionality. Verify signal strength using the front panel LCD display. Advanced Features

ALE (Automatic Link Establishment): Automates the selection of the best frequency based on link quality data, significantly reducing manual operator overhead.

COMSEC/ECCM: Supports digital encryption and frequency hopping to protect against interception and jamming.

Flash Messaging: Capability to transmit up to 1,000 predefined messages through a mini-data terminal. PRC-6020 Radio Set Technical Overview | PDF - Scribd Receiver-Transmitter (RT-1523) : The RT-1523 is the main

HX PRC-6020 (often referred to as the PRC-6020GV ) is a combat-proven, high-frequency (HF) man-pack radio system designed for reliable voice and high-speed data communications in tactical environments. It belongs to the Tadiran HF-6000 family of multi-adaptive radio systems. Technical Data & Specifications

The system is characterized by its wide frequency coverage and advanced electronic counter-countermeasure (ECCM) capabilities. Elbit Systems UK Ltd Technical Specification Frequency Range 1.5000 to 29.99999 MHz 2,850,000 channels (10 Hz spacing) Pre-set Channels 100 programmable channels Output Power Selectable 5W, 10W, or 20W Modulation USB, LSB, and AM Up to 4800 bit/sec Receiver Sensitivity -110 dBm (10 dB SINAD) Battery Type 12V, 15Ah Lithium Sulphur dioxide (LiSO2) Operational Modes Frequency Management:

Supports Fixed Operating Frequency (FOF) and Dual-frequency simplex (DFS). Automation: and optional Military Standard (Automatic Link Establishment) for rapid connection setup. Communication Types:

Supports analog and digital voice (with vocoders), telegraphy, and encrypted flash messages. Installation & Configuration

The PRC-6020 is modular and can be deployed in several configurations depending on the mission requirement: Elbit Systems UK Ltd Man-pack (PRC-6020): A compact integrated unit carried by a single operator. Vehicular (VRC-6020):

Low-power configuration (20W) installed in tactical vehicles. Fixed/Stationary:

Used in strategic sites or shipboard configurations, often paired with high-power amplifiers like the GRC-6400 (400W) or GRC-6600 (1000W). Key Installation Components:

Proprietary antennas designed for high performance; must be changed during startup or operation based on frequency selection. Power Input:

Uses a specific power input pin (Mtrl-Brass) and battery box lock mechanism (Mtrl-Aluminum) for secure attachment.

Requires 10 cryptographic keys and utilizes internal FPGA circuits (XILINX) for secure logic and codec conversion. Configuration Interface

Accessing the internal settings requires specific command codes: 00000 + ENT: Returns to the Main Menu. 10000 + ENT: Accesses the second channel programming screen. 20000 + ENT:

Allows viewing the load screen for security keys (Safe and AJ modes). or specific maintenance procedures for the PRC-6020 battery box and power input? PRC-6020 Radio Set Technical Overview | PDF - Scribd

The HX-PRC 6020 (often part of the Tadiran HF-6000 family) is a high-performance HF man-pack radio designed for secure military voice and data communications. Technical Specifications Frequency Range: 1.5 MHz to 29.9999 MHz.

Channels: Supports up to 2.85 million channels at 10 Hz intervals. Output Power: Selectable settings of 5W, 10W, or 20W.

Operating Modes: Includes Fixed Operating Frequency (FOF), Dual-frequency simplex (DFS), and Automatic Link Establishment (ALE).

Modulation: Upper Side Band (USB), Lower Side Band (LSB), and Amplitude Modulation (AM). Data Rate: Capable of data transmission up to 4800 bit/s.

Power Source: Typically powered by a 12V, 15Ah Lithium Sulphur Dioxide (LiSO2) battery pack. Key Installation & Interface Elements

Antenna Connections: Features specific connectors for Dipole (wire) and Whip antennas.

Audio Interface: Connectors for control microphones, standard audio accessories, or portable speakers.

Data/Remote Port: An RMT/DATA connector is available for remote control, data terminals, or loading radio parameters.

Mounting Configurations: While primarily a man-pack, it can be integrated into VRC-6020 vehicular or fixed-station setups.

For detailed wiring diagrams or specific field programming, you can find further technical documentation on sites like Scribd or through official manufacturers like Bharat Electronics Limited (BEL) . HF man-pack radio 20 W (PRC-6020GV)

The HX-PRC 6020 (often part of the Tadiran HF-6000 family) is a tactical high-frequency (HF) manpack radio designed for secure, long-range voice and data communications in modern battlefield environments. It is valued for its flexibility, supporting backpack, vehicular, and fixed-station configurations. Technical Data & Specifications

The HX-PRC 6020 operates across a broad spectrum with multiple power settings to balance range and battery life. Specification Frequency Range 1.5 to 29.9999 MHz Channels Up to 2,850,000 channels (10 Hz spacing) Power Output Selectable: 5W, 10W, or 20W Modulation Modes USB, LSB, AM, CW Communication Range Ground Wave: ≥is greater than or equal to 30 km; Sky Wave: ≥is greater than or equal to Weight < 5.5 kg (including battery, excluding accessories) Dimensions 360 x 255 x 100 mm (with battery) Operating Temp -40°C to +65°C Key Features & Capabilities

Automatic Link Establishment (ALE): Supports both basic AUTOCALL and MIL-STD-188-141A ALE for rapid connection setup (approx. 2.5 to 4.5 seconds).

Data Transmission: Integrated modem supports data rates up to 4800 bit/s.

Security: Features frequency hopping (ECCM), digital encryption (COMSEC), and a digital squelch to prevent false alarms.

Built-In-Test (BIT): Provides on-line and operator-initiated diagnostics to the module level. Installation & Configuration

The PRC-6020 is modular, allowing users to switch between different deployment modes:

Manpack Configuration: The radio is typically paired with a 12V, 15Ah lithium battery (such as those from Bharat Electronics Limited (BEL)) and carried in a backpack.

Vehicular Configuration (VRC-6020): Installed in vehicles using a specialized mounting tray that provides power from the vehicle’s electrical system.

Fixed Station: Often used with high-power amplifiers (e.g., GRC-6400 or GRC-6600) to reach power levels up to 1000W for strategic communication. Operational Controls The radio interface includes: Viewer: A screen for visualizing menus and system status.

Keyboard: Five primary keys with dual functions (e.g., LITE for illumination, CLR for clear mode, and SEC for safe mode).

Connectors: Specific ports for dipole/wire antennas and whip antennas, ensuring connectivity in diverse terrain. PRC-6020 Radio Set Technical Overview | PDF - Scribd

2. Modulation and Emission Designators

The radio supports a wide array of analog and digital waveforms:

  • Analog: AM (Amplitude Modulation), FM (Narrow/Wide), DSB (Double Sideband)
  • Digital: DMR (Tier I & II), P25 Phase I & II, AES-256 Encryption
  • Data Protocols: IP over RF, APRS, GPS Relay

6. Cryptographic and GPS Data

  • Encryption: AES-256 (CBC mode), FIPS 140-3 validated
  • Key Fill: DS-101 protocol via 6-pin keyfill port
  • GPS: Integrated, 72-channel u-blox; Accuracy < 2.5m CEP
  • Location Updates: NMEA 0183 output over serial

2. Installation / Setup Procedure

The HX PRC 6020 is a portable handheld – “installation” refers to programming, battery/antenna fitting, and optional vehicle kit setup.

7. Installation Checklist

  • [ ] Radio powered on without error LEDs.
  • [ ] Antenna SWR measured ≤2.0:1 at operational frequencies.
  • [ ] Handset audio clear (Rx/Tx test with second radio).
  • [ ] Battery fully charged (green LED on charger).
  • [ ] In vehicle: Amplifier cooling fan runs on Tx.
  • [ ] GPS / data terminal (if used) communicating over 7-pin serial.

Phase 4: Fixed Station Installation (Base Camp / EOC)

Step 1: AC Power Supply

  • Use the HX-PSU-1215 (12V, 15A switching supply).
  • Connect the 4-pin LEMO from the PSU to the radio’s DC IN port.

Step 2: Permanent Antenna

  • Install a fiberglass collinear antenna at least 30 feet above ground.
  • Use high-quality 50-ohm coax (LMR-400).
  • Lightning protection: Install a polyphaser gas tube arrestor between the coax and the radio.

Step 3: Remote Control & Data

  • Connect a USB-C cable from the radio to a Windows PC.
  • Install the HX-CPS (Customer Programming Software) v.6.4.
  • Configure the COM port (typically 115200, 8N1).