Prosecure Opti Combi Manual English Site

The dormakaba Prosecure Opti Combi is a combined microwave radar and active infrared sensor for automatic door activation and safety, meeting EN 16005 standards. It features an integrated LCD interface for programming and supports physical adjustments for mounting height and tilt angle. You can find the full technical details on the official dormakaba website.

: Combines a radar activation sensor (for opening impulses) with an infrared safety sensor (to detect presence and prevent door closure on people or objects). Compliance : Fully certified according to standards for personal safety in automatic door systems. Key Features

: Includes an integrated LCD display for easy programming, direction recognition, and cross-traffic suppression to prevent unnecessary door cycles. Installation Instructions Preparation

: Carefully remove the sensor cover by inserting a screwdriver into the rear opening and folding it upward; never open from the top.

: Attach the provided self-adhesive template to the door lintel and drill according to the hole pattern. The standard installation height is approximately 2.20 meters Positioning

: Use the built-in inclination angle scale to precisely position the infrared curtain. An LCD display assists in confirming the alignment. Environmental Protection

: Protect the sensor from direct rain. For outdoor applications, dormakaba recommends installing a dedicated weather cap. Programming and Configuration Initialisation : Upon connecting power, the system initializes for 10 seconds

, during which the red/green LED flashes. Avoid the detection area during this time. Interface Controls

: Use the red and black pushbuttons to navigate the menu and a potentiometer to adjust sensitivity. Red Button

: Switches between function modes (indicated by "C" on the LCD). Black Button : Selects specific values or saves settings. Field Adjustments

: You can modify the size and shape of the detection field using the potentiometer. Settings include "Slow Motion" detection for high-sensitivity requirements. Learning Mode

: After making changes, the sensor may require a "learning time" (typically 60 seconds). Do not enter the detection zone for 10 seconds following this setup to allow for background calibration. Technical Troubleshooting & Maintenance LED Status Indicators : Device ready/standby. : Detection active (door opening). Flashing Red/Green : Setup/Fault mode. Maintenance Note

: If the device is set to "Maintenance/Off" mode via internal controls, it will typically reactivate automatically after 15 minutes to ensure safety is not permanently disabled.

For detailed wiring diagrams or specific error codes, you can download the full PDF manuals from the dormakaba Download Centre wiring diagram

for connecting this sensor to a specific door operator like the ES 200?

Dorma Prosecure opti combi sensor/radar til skydedøre. - DanZafe

Disclaimer: Product designs, button layouts, and software versions may vary by region and manufacturing date. Always refer to the official printed manual included with your unit. This article is a comprehensive guide but does not replace the original safety instructions.

7. Troubleshooting Common Issues

| Issue | Probable Cause | Recommended Solution | | :--- | :--- | :--- | | Machine will not start | E-Stop engaged; Air pressure low; Door open. | Release E-Stop; Check pressure regulator; Close safety guards. | | Inconsistent Fill Levels | Product supply pressure fluctuating; Worn nozzle seal. | Stabilize product pump pressure; Check/replace nozzle O-rings. | | Dripping Nozzle | Worn valve seals; Product viscosity too low. | Replace valve seals; Adjust shut-off timing on HMI. | | Caps not tightening | Incorrect torque setting; Worn cap gripper jaws. | Adjust torque via regulator; Replace gripper jaws. |

5.3. Shutdown

1. Stop the production cycle via the HMI.
2. Turn off the product supply pump.
3. Engage in cleaning procedures (see Section 6).
4. Turn off the main power switch and release pneumatic pressure.

1. The Manufacturer’s Legacy Portal

Prosecure documents are often hosted under parent brands or legacy archival sites. Go directly to the "Support" or "Downloads" section. Use the search term exactly as: Opti Combi. Do not search for "manual" alone.

5. Step-by-Step Cooking Instructions