Setting up a POS 80 thermal printer is a critical step for any retail or hospitality business looking to print professional 80mm receipts. While these generic thermal printers are known for being cost-effective and fast, their setup process often requires specific driver installation to work correctly with Windows, Linux, or macOS systems.
This guide provides a comprehensive walkthrough for the POS 80 setup download and installation process. 1. Hardware Connections
Before starting the software installation, ensure your hardware is properly connected:
Power: Plug the power adapter into the printer and a wall outlet.
Data Cable: Connect the printer to your computer using the provided cable. Most POS 80 models use USB, but some may use Ethernet (LAN), Serial, or Parallel ports. pos 80 setup download
Paper Loading: Open the top cover and place a standard 80mm thermal paper roll inside. Ensure the paper is guided toward the print head and close the cover securely. 2. Where to Download POS 80 Drivers
The term "POS 80" usually refers to a generic series of printers made by various manufacturers like Xprinter, POS-X, or HPRT. pos 80 series | Xprinter
To set up a POS-80 (80mm thermal receipt printer), you typically need to download and install a specific driver that matches your manufacturer (e.g., Xprinter, POS-X, or Rongta). If your printer is "generic," universal ESC/POS drivers are often the most reliable solution. 1. Download the Correct Driver
Because "POS-80" is a standard specification rather than a single brand, identify your manufacturer first: Setting up a POS 80 thermal printer is
Xprinter Users: Download drivers from the Xprinter Official Site.
POS-X Users: Access the Thermal Receipt Printer Driver for Windows 11/10.
Generic/Universal Drivers: If you don't know the brand, use a Generic ESC/POS Driver which works for most 80mm thermal printers. Rongta Tech: Available on the Rongta Download Page. 2. Physical Setup & Connection Before running the software, ensure the hardware is ready:
Unpack & Power: Connect the power adapter to the printer and a wall outlet. For Linux (CUPS + ESC/POS):
Load Paper: Open the top cover, place the 80mm thermal roll so the paper feeds from the bottom of the roll, and pull a small lead out before closing.
Connect to PC: Plug the USB cable into both the printer and your computer. Turn the power switch to the "ON" position. 3. Installation Steps (Windows 10/11)
How to install POS-58 or POS-80 printer - Help Center Nextar
cups-pos80-driver.deb or use sudo apt install printer-driver-escpos.lsusb to find the vendor/device ID.The printer prints gibberish or random characters.
The printer is offline or not responding.
ping 192.168.x.x) to ensure it is on the network.The paper cutter cuts in the middle of the receipt.