Point-n-measure Digital Tape W5746 User Manual

The Point-N-Measure Digital Tape W5746 is an electronic distance-measuring tool designed to simplify calculations for DIYers and contractors. Unlike standard metal tapes, this device uses ultrasonic or laser-guided technology to measure distances up to 50 feet. Core Functionality & Controls

The device features a digital display that provides measurements in inches, feet, and centimeters.

Standard Measurement: Place the base of the unit against a wall, aim the laser at the opposite target, and press the main measurement button to display the distance.

Area and Volume Calculations: The W5746 can automatically compute square footage (area) or cubic feet (volume) by measuring consecutive dimensions (length, then width, then height).

Memory & Storage: The unit includes a "freeze" or memory function to save a reading for later reference.

Auto Shut-off: To preserve its 9V battery, the device automatically powers down after five minutes of inactivity. Step-by-Step Operation

Power On: Turn the device on and select your preferred units (inches, feet, or centimeters).

Positioning: Ensure the ultrasonic/laser sensor is clear of obstructions. The measurement is typically calculated from the base of the unit. Targeting: Point the laser at the intended end-point.

Reading: Press the button to capture the distance. If calculating area, press the "Area" button and take a second measurement.

Clear/Reset: Hold the primary button to reset the display to zero before starting a new measurement. Key Specifications Max Range Power Source One 9V Battery (typically not included) Display Units Inches, Feet, Centimeters Primary Uses Square footage for flooring/paint, cubic feet for HVAC

How To Use A Digital Tape Measure | Engineer Supply - EngineerSupply

The Performance Tool W5746 Point-N-Measure Digital Tape Go to product viewer dialog for this item.

is an electronic distance measurer designed for quick readings up to 50 feet. Unlike standard tape measures, this device uses ultrasonic technology with a laser target pointer to identify the exact end point of your measurement. Quick Setup & Operation Point-N-Measure Digital Tape W5746 User Manual

Power: Requires one 9V battery (not included). It features an auto shut-off after five minutes of inactivity to preserve battery life. Taking a Measurement:

Place the base of the device firmly against the wall or starting surface.

Point the laser at the opposite target (e.g., the opposite wall). Push the main button to capture the distance.

Units: The display can cycle between inches, feet, and centimeters. Key Features & Functions

Area & Volume Calculations: The device can automatically calculate square footage or cubic feet by taking consecutive length, width, and height readings.

Memory/Freeze Function: You can "freeze" or store measurements in the device's memory for easy recording later.

Targeting: The laser dot is used only for targeting accuracy; the actual measurement is performed electronically. Maintenance & Safety

Battery Care: Remove the battery if the device will not be used for an extended period to prevent leakage.

Accuracy Tips: Avoid aiming at highly reflective or shiny surfaces, as this can cause the signal to bounce and lead to incorrect readings. Ensure the device remains still while the measurement is being captured.

For further assistance, retailers like Summit Racing provide technical specifications for this model.

Are you trying to calculate the total square footage for a specific project, or do you need help calibrating the device for more precision?

Digital Tape Measure: Everything You Need to Know About - VEVOR Blog The Point-N-Measure Digital Tape W5746 is an electronic

9. Troubleshooting Common Problems

| Problem | Likely Cause | Solution | |---------|--------------|----------| | Laser won’t turn on | Dead battery or no battery | Install/replace 9V battery | | Display shows “ERROR” | Target surface too reflective/dark | Use a piece of cardboard or matte tape as target | | Measurement obviously wrong | Wrong reference setting (front vs back) | Press REF to toggle to correct mode | | Flashing “Lo” icon | Low battery | Replace battery immediately | | Laser dot appears weak | Dirty lens or dying battery | Clean lens; replace battery | | Freezes after measurement | Static discharge or low battery | Remove battery for 10 sec, reinsert |

3. Device Diagram (Key Features)

(Insert product image here if applicable)

B. Using "Point-N-Measure" (Distance Mode)

This feature allows you to measure distances from the back of the tool to a target point.

Press the ON/OFF button.
Press the Read/Measure button (often labeled with a "Read" or distinct icon).
The device will calculate the distance to the object opposite the tape. Ensure the back of the tool is flush against the starting wall or surface.

Point-N-Measure Digital Tape W5746: The Complete User Manual

Point-N-Measure Digital Tape W5746

6.5 Adding & Subtracting Measurements

Add: Take measurement A → press MODE briefly (shows ‘+’) → take measurement B → press MEASURE → total appears.
Subtract: Take measurement A → press MODE & REF simultaneously (shows ‘-’) → take measurement B → press MEASURE → difference appears.

This eliminates mental math when calculating offsets or remaining material lengths.

10. Troubleshooting

| Issue | Solution |
|-------------------------------|----------------------------------------|

The Point-N-Measure Digital Tape W5746 (often listed as a Performance Tool product) is a legacy handheld laser distance measurer. While original digital manuals can be difficult to find due to the product's age, its core functions follow standard laser measuring protocols. Key Product Features

Measurement Range: Designed to measure interior dimensions up to 50 feet (15 meters).

Calculations: Automatically calculates length, area (square footage), and volume (cubic feet).

Display: Features an LCD screen that shows readings in both feet/inches and metric units.

Portability: Compact, pocket-sized design weighing approximately 4 ounces. How to Use (Standard Operation) Based on similar models and seller descriptions:

Targeting: Point the laser at the far wall or surface you wish to measure. Press the ON/OFF button

Measuring: Press the READ or MEASURE button. The distance should appear on the LCD screen.

Functions: Use the mode buttons (often labeled for Area or Volume) to toggle between simple distance and calculated square/cubic footage.

Placement: For accurate readings, ensure the base of the unit is flat against the starting wall. Quick Review: Pros & Cons

Reviews from secondary marketplaces and historical listings suggest a mixed performance: Pros:

Ease of Use: Simple "point and click" interface for quick room estimates.

Convenience: Good for DIY projects like measuring for paint or carpet without a helper. Cons:

Accuracy Limitations: Like many early sonic or basic laser measures, accuracy may vary, typically within 1/8 of an inch under ideal conditions.

Indoor Limitation: Primarily effective for interior use; laser visibility and accuracy drop significantly in bright sunlight.

Legacy Tech: Newer "2-in-1" models now offer physical tapes combined with lasers for better versatility. AI responses may include mistakes. Learn more Point-n-measure Digital Tape W5746 by Performance Tool 2004

The Performance Tools Point-N-Measure Digital Tape W5746 is a 50-foot laser-based distance measurer that automatically calculates area and volume. The device, which offers imperial and metric unit switching and a 9V battery-powered design, eliminates the safety risks associated with traditional metal tapes. For more details, visit Performance Tools Point-N-Measure Digital Tape W5746 | eBay

Since I cannot physically hand you a piece of paper, I have reconstructed the standard user manual content for this specific tool below. This guide covers the features, instructions, and troubleshooting for the Point-N-Measure tape measure.