51016499 1 2b Driver Install Patched: Pinnacle Systems Gmbh Bigben

To install the driver for the Pinnacle Systems GmbH BigBen 51016499 1.2b Go to product viewer dialog for this item. you must first identify that this is a legacy PCI Video Capture Card , often associated with the Pinnacle Studio 700-PCI

. Because this is older hardware, driver support is generally limited to legacy 32-bit operating systems like Windows XP, Vista, or Windows 7. Installation Steps

For the best chance of a successful installation, follow this sequence: Preparation

: Uninstall any existing Pinnacle software or failed driver attempts via the Windows Control Panel Hardware Connection

: Ensure the PCI card is firmly seated in a clean PCI slot on your motherboard. Driver Download Official Source : Visit the Pinnacle Software Updates page to check for legacy hardware drivers. Legacy Hardware Page : Pinnacle maintains a Hardware Driver Download Page

where you can look for drivers corresponding to "700-PCI" or "500-PCI" models, which share similar architecture. Manual Install

Disconnect the hardware (or disable it in Device Manager) before running the downloaded driver installer. Follow the on-screen prompts and restart your computer. Verify the installation in Device Manager

under "Sound, Video and Game controllers." It should appear without exclamation marks. Pinnacle Studio Critical Compatibility Notes Pinnacle Systems - Software Updates pinnacle systems gmbh bigben 51016499 1 2b driver install

It sounds like you’re looking for a driver installation guide for a specific piece of hardware, likely a Bigben interactive controller (model number 51016499 — probably a PC/PS3/PS4 wired controller) that is also labeled with Pinnacle Systems GmbH (often associated with game controllers or video editing hardware in the past).

However, you added " — story at the end, so I’ll give you a short factual story/explanation of what this product likely is, followed by the driver installation steps.

Phase 2: Manual Driver Installation via "Have Disk"

1. Extract the downloaded ZIP file to a folder (e.g., C:\Pinnacle_Driver).
2. Open Device Manager.
3. Right-click the unknown device → Update driver → Browse my computer for drivers.
4. Click Let me pick from a list of available drivers on my computer.
5. Click Have Disk → Browse.
6. Navigate to your extracted folder and look for a file named PCTVUsb.inf or pinnacle.inf.
7. Select it and click Open.
8. From the list, choose "Pinnacle Systems GmbH BigBen 51016499 1 2B" (or the closest match).
9. Click Next. Ignore the "Windows cannot verify the publisher" warning → Install anyway.

Conclusion

The pinnacle systems gmbh bigben 51016499 1 2b driver install is a classic case of legacy hardware outliving its official software support. While modern Windows versions do not recognize this device natively, the combination of disabling driver signature enforcement, using the correct Empia-based INF, and manually installing via "Have Disk" almost always succeeds. If you follow the steps outlined—especially Phases 2 and 4—you should see your BigBen device fully functional.

For those preserving vintage home theater PCs or running Windows 7-era applications, this guide ensures your Pinnacle BigBen tuner lives on. For everyone else: consider this an excellent excuse to upgrade your TV tuner to the modern era.

Need further help? Provide your exact Hardware ID (USB\VID_XXXX) from Device Manager in any technology forum, and the community can pinpoint the precise INF modification required.

Disclaimer: This article is for educational purposes. Modifying driver signature enforcement carries security risks. Always scan downloaded drivers for malware. Pinnacle Systems GmbH, BigBen, Empia, and Microsoft are trademarks of their respective owners.

Here’s a clear, step-by-step draft text for installing the driver for Pinnacle Systems GmbH / BigBen 51016499 (likely a video or TV tuner device, possibly the Pinnacle PCTV 310i or similar). To install the driver for the Pinnacle Systems

Since the exact model “1 2b” isn’t standard, I’ve written it generically but included the most common installation method for legacy Pinnacle devices.

Driver Installation Instructions for Pinnacle Systems GmbH – BigBen 51016499

Before you begin:

• Do not plug the device into your computer until step 3.
• This device often requires drivers for Windows 7/8/10 (32-bit or 64-bit). For Windows 10/11, use compatibility mode if needed.

Step 1 – Download the correct driver
Go to the official Pinnacle support site (now part of Avid Technology) or use a trusted archive like pinnacle.com/support.
Search for: PCTV 310i or 51016499.
If unavailable, try the generic “Pinnacle PCTV Drivers Package” for your Windows version.

Step 2 – Run the installer as administrator

• Right-click the downloaded .exe file → Run as administrator.
• Follow the on-screen instructions. Do not connect the hardware yet unless the installer explicitly asks you to.

Step 3 – Connect the device
When the installer prompts “Connect the device now” (or after the software finishes installing):

• Plug the BigBen 51016499 into a USB port (if USB) or PCI/PCIe slot (if internal).
• Windows should detect new hardware.

Step 4 – Complete driver setup

• If Windows asks for drivers automatically, point it to C:\Program Files (x86)\Pinnacle\Drivers or the folder where you extracted the driver.
• If using a legacy driver on Windows 10/11, right‑click the .inf file → Install.

Step 5 – Restart your PC
Restart to finalize the installation.

Troubleshooting:

• Device not recognized – Try a different USB port (USB 2.0 preferred for older devices).
• Driver signature error – Disable driver signature enforcement temporarily (Windows 10: restart with advanced startup → Disable driver signature enforcement).
• No TV signal – Ensure the correct tuner standard (PAL/NTSC/SECAM) is selected in the Pinnacle software.

1. Identifying the Hardware

The term "BigBen" is an internal codename used by Pinnacle Systems (a subsidiary of Avid and later Corel) for a specific line of USB TV Tuners/DVB-T sticks.

• Device Name: Pinnacle PCTV DVB-T Flash Stick / PCTV Dual DVB-T Diversity Stick.
• Hardware ID: The sequence "51016499" likely refers to a specific subsystem ID, but the most critical identifier for driver installation is the USB ID.
• Common USB IDs for "BigBen" devices: 2304:0236 or 2304:0237.

How to verify your specific ID: If the automatic installer fails, you must find the Hardware ID:

1. Open Device Manager (Right-click Start button > Device Manager).
2. Look for an "Unknown Device" or a device with a yellow exclamation mark.
3. Right-click it > Properties > Details tab.
4. Under "Property," select Hardware Ids.
5. Look for a line like USB\VID_2304&PID_0236.

Option 3 – Use x360ce (most reliable today)

1. Download x360ce (Xbox 360 Controller Emulator) from the official site.
2. Place x360ce.exe in the game’s executable folder or run it standalone.
3. Let it create xinput1_3.dll.
4. It will auto-detect your Bigben controller.
   • If not, use “Record” to map buttons manually.
5. Save the config — now your controller acts like an Xbox 360 controller.

If you have an DVB-T2 signal:

• This device will find 0 channels.
• You must upgrade to a Pinnacle DVB-T2 stick (e.g., PCTV 292e).

Guide: Pinnacle Systems "BigBen" Driver Installation

Method B: Manual Installation (Legacy Drivers)

If Windows does not find a driver, you must use compatibility mode.

1. Download the Driver: Search for the "Pinnacle PCTV Driver x64" or specifically the driver package for "PCTV 801e" or "PCTV 7010" (common hardware revisions for BigBen). Trusted sources like Softpedia or DriverGuide often host these legacy files.
2. Extract the Files: If the driver comes in a ZIP file, extract it to a folder on your desktop.
3. Compatibility Mode:
   • Locate the Setup.exe file inside the extracted folder.
   • Right-click > Properties > Compatibility tab.
   • Check "Run this program in compatibility mode for" and select Windows 7 or Windows Vista.
   • Run the installer as Administrator.
4. Manual Update (If installer fails):
   • Go back to Device Manager.
   • Right-click the Unknown Device > Update Driver.
   • Select "Browse my computer for drivers".
   • Point the browser to the folder where you extracted the driver files.
   • Windows should detect the .inf file and install the "Pinnacle PCTV..." driver.

Step-by-Step Driver Installation

Because these devices are older, Windows 10 and Windows 11 often fail to find the drivers automatically. Follow these steps to force the installation.