جزئیات پست

Nokia Model 100 Type Rh 130 Unlock Code May 2026

If your phone displays "SIM Restriction" or "Phone restricted" when you insert a SIM card from a different carrier, you need a network unlock code. Standard Method : Use the code sequence #PW+CODE+N# three times quickly. four times quickly. two times quickly. : The unlock level, usually (most networks) or (often for Rogers/Fido). : Power on without a SIM card and type #pw+123456789012345+1# : You usually only have 3 to 10 attempts

before the phone hard-locks. If the counter is blocked, a code will no longer work, and specialized hardware tools (like F-Bus cables) are required. 2. Resetting the Security/Lock Code

If you are locked out of the keypad or menus, try these steps: Default Code

: The factory default security code for nearly all Nokia 100 devices is Soft Reset : If the phone is on, dial and enter the security code (12345) when prompted. Hard Reset : To erase all data and reset the lock code, dial Button Shortcut (Hard Reset) : If you cannot access the dialer: Turn the phone Press and hold Call (Green) + * + 3 simultaneously. While holding those, press the button until the Nokia logo appears. 3. Essential Secret Codes for Nokia 100 How To Hard Reset Nokia Phones - Factory Reset Code

How to Unlock Your Nokia 100 (Type RH-130) The Nokia 100 (Type RH-130) Go to product viewer dialog for this item.

is a classic and reliable feature phone. Whether you need to reset a forgotten security code or want to use the device on a different mobile network, unlocking it is a straightforward process.

Below is a guide on how to handle the two most common types of locks for this model. 1. Resetting the Security Code

If your phone is asking for a security or "lock" code to access the menu or keypad, try these steps:

Try the Default Code: Almost all Nokia phones, including the , use 12345 as the factory-set security code.

Generate a Master Code: If the default code has been changed and forgotten, you can generate a "Master Code" based on your phone’s unique IMEI number.

Find your 15-digit IMEI by dialing *#06# on the standby screen.

Use a tool like the Nokia Master Code Calculator or NFader to generate a bypass code.

Factory Reset: If you can still access the menu, you can reset all settings to factory defaults by dialing *#7780#. To wipe all data and settings (Hard Reset), dial *#7370#. 2. Unlocking the Network (SIM Restriction)

If you see a message like "SIM Restriction" or "Enter Restriction Code" when inserting a card from another carrier, you need a network unlock code. Unlock Nokia 100 Phone | Unlock Code - UnlockBase

To unlock a Nokia 100 (Type RH-130) Go to product viewer dialog for this item.

, you typically need a specific network unlock code generated from your device's unique IMEI number. This model is a legacy DCT4 platform device, which often allows for code-based unlocking. 1. Getting Your Network Unlock Code

Because unlock codes are unique to each handset, you must first obtain your device's IMEI by dialing *#06# on the keypad. Once you have this, you can get a code through the following methods:

Original Carrier: Contact your original service provider (e.g., Vodafone, Rogers). They may provide the code for free or a small fee if the device is eligible.

Unlock Calculators: Legacy tools like the Nokia DCT4 Code Calculator or the NokiaFREE Unlock Codes Calculator can generate these codes for older models like the

Third-Party Services: Websites like UnlockBase provide unique codes for a fee based on your IMEI and original network. 2. How to Enter the Code

Once you have your specific code (usually in a format like #pw+1234567890+1#), follow these steps: Turn on the phone without a SIM card inserted. On the main screen, carefully type the code sequence. To get p, press the * key 3 times quickly. To get w, press the * key 4 times quickly. To get +, press the * key 2 times quickly. The final sequence should look like: #pw+CODE+1#.

If successful, the screen will display "SIM Restriction Off". 3. Security/Lock Code (Default) Unlock Nokia 100 (2011 - Microsoft Q&A

The standard default security code for the Nokia 100 (Type RH-130) is 12345. This code is typically used to unlock the phone's keypad, access security settings, or perform a factory reset. Reset and Security Codes

If the default code does not work or you need to reset the device, you can use the following standard Nokia service codes: Default Security Code: 12345 (or occasionally 00000). NOKIA MODEL 100 TYPE RH 130 UNLOCK CODE

Soft Reset: Dial *#7780# to restore factory settings without deleting personal data.

Hard Reset: Dial *#7370# to erase all data and reset the phone to its original state.

View IMEI: Dial *#06# to find your phone's unique identification number, which is necessary if you need a network unlock code from a carrier. Network Unlocking Codes for NOKIA 100 - HardReset.info

12345 This is the default security code. press and hold # Lets you switch between lines. HardReset.info Nokia 130 (2023) User Guide | HMD

Unlocking Nokia Model 100 Type RH-130: A Step-by-Step Guide

Are you tired of being locked into a specific network with your Nokia Model 100 Type RH-130? Do you want to explore the freedom of using your phone with any SIM card from any carrier? You're in the right place! In this blog post, we'll walk you through the process of unlocking your Nokia Model 100 Type RH-130 using its unlock code.

Why Unlock Your Nokia Model 100 Type RH-130?

Before we dive into the unlocking process, let's quickly discuss the benefits of unlocking your phone:

Understanding the Unlock Code

The unlock code is a unique sequence of numbers that, when entered into your phone, will release it from its network lock. For Nokia phones, the unlock code is usually a 4- to 8-digit code. You can obtain the unlock code from your carrier, a third-party service, or by purchasing it from a reputable provider.

Step-by-Step Unlocking Process

Here's a step-by-step guide to unlocking your Nokia Model 100 Type RH-130:

  1. Check if your phone is eligible: Ensure your phone is not already unlocked and that it's compatible with the unlock code method.
  2. Obtain the unlock code: Get the unlock code from your carrier or a reputable provider. Make sure to provide the correct IMEI (International Mobile Equipment Identity) number of your phone, which can be found by dialing *#06#.
  3. Insert a non-supported SIM card: Put a SIM card from a different carrier into your phone. This will prompt the phone to request the unlock code.
  4. Enter the unlock code: Type the unlock code into your phone using the keypad. You may have a limited number of attempts to enter the correct code.
  5. Confirm the unlock: Once you've entered the correct unlock code, your phone will confirm that it's unlocked. You can then use your phone with any SIM card from any carrier.

Additional Tips and Precautions

By following these steps and using a valid unlock code, you can enjoy the freedom of using your Nokia Model 100 Type RH-130 with any SIM card from any carrier.

The Nokia 100 (Type RH-130) is a classic mobile device built on the DCT4+ platform. Unlocking this device typically refers to two distinct needs: removing a network SIM lock to use other carriers or resetting a forgotten security lock code. 1. Removing Network Restrictions (SIM Unlock)

To use the Nokia 100 with a different service provider, you must enter a specific restriction code. This process is generally permanent and does not affect the phone's warranty.

Requirements: You need the phone's 15-digit IMEI number, which can be found by dialing *#06# or checking the sticker under the battery.

The Code Format: The unlock sequence follows the pattern #pw+CODE+1#. To get the p, press the star key (*) three times quickly. To get the w, press the star key four times quickly. To get the +, press the star key twice quickly.

Execution: Switch on the phone without a SIM card and type the sequence carefully.

Caution: Most Nokia devices only allow three attempts to enter an unlock code. Exceeding this may permanently block the code counter, requiring professional hardware tools to reset. 2. Resetting the Security/Lock Code

If the phone is locked out due to a forgotten passcode, you can try the factory default or a hard reset. Nokia 130 (2023) User Guide | HMD

Step 2: Obtaining the Unlock Code

There are three primary ways to obtain the code for the RH-130 model:

A. Contact Your Carrier (Recommended) If you are the original owner or the account is in good standing, contact the carrier the phone is locked to (e.g., T-Mobile, AT&T, Vodafone). Request a "Device Unlock Code." They may provide it for free if you meet their criteria. If your phone displays "SIM Restriction" or "Phone

B. Use a Paid Unlocking Service If the carrier refuses or you are not the original owner, you can use a third-party unlocking service.

C. Free Code Calculators (Use with Caution) Some older Nokia models can be unlocked using free DCT4 calculators found online. However, the RH-130 is a newer budget model (Series 30), and older calculators often do not support it correctly. Warning: Entering an incorrect code too many times (usually more than 3 or 5 times) can hard-lock the phone permanently.

Important note on legality and ethics

Unlocking a phone is legal in many places but can be restricted by carriers or local laws. Use only authorized methods, and don’t attempt to bypass locks on devices you don’t own or have permission to modify.

Nokia Model 100: Type RH-130 Overview

The Nokia 100 (also referenced as model number RH-130) is a basic, ultra-affordable feature phone released by Nokia in 2011. It was designed primarily for voice calls, SMS, and long battery life, targeting emerging markets or users needing a simple backup phone. Key specifications include:

The phone is typically locked to a specific mobile network carrier (e.g., Vodafone, Orange, T-Mobile, AT&T prepaid) if purchased under subsidy.

Conclusion

The Nokia 100 Type RH-130 can be unlocked via a unique network unlock code based on its IMEI. Obtain the code from either your carrier or a trusted online unlocking service. The unlocking procedure is straightforward, but due to 2G network phase-outs, the practical usefulness of this phone is limited to regions where GSM 900/1800 still operates (e.g., parts of Africa, Asia, Europe).

If you still wish to use the Nokia 100, ensure your target carrier supports 2G voice calls before investing in an unlock code.

The Nokia 100 (Type RH-130) Go to product viewer dialog for this item.

is a classic mobile handset known for its simplicity and durability. Unlocking this device typically refers to one of two scenarios: bypassing a forgotten security code (lock code) or removing a network carrier restriction (SIM lock). 1. Default Security Code

If you are prompted for a security code to access the phone's menu or reset settings, most Nokia devices, including the Model 100, use a factory default. Standard Default: 12345.

Usage: Enter this code when the phone asks for a "Security Code" or "Lock Code".

Warning: If the code has been changed and you have forgotten it, you may need a hard reset or specialized software to bypass it. 2. Network Unlocking (Carrier Lock)

with a different SIM card from another provider, you must enter a specific network unlock code. This code is unique to your phone’s IMEI number. How to find your IMEI: Dial *#06# on your keypad. Look at the label under the battery. Unlocking Procedure: Turn on the phone without a SIM card. Enter the following sequence using the keypad: #pw+CODE+1#. To get p: Press the * key three times quickly. To get w: Press the * key four times quickly. To get +: Press the * key twice quickly.

CODE: This is the unique 7 to 15-digit unlock code provided by your carrier or a third-party service.

The phone should display "SIM Restriction Off" if successful. 3. Factory Reset and Troubleshooting

If the phone is malfunctioning or you need to wipe all data, you can perform a factory reset.

Soft Reset: Dial *#7780# to restore original factory settings without deleting personal data.

Hard Reset: Dial *#7370# to wipe all data and settings. You will likely be asked for the security code (default 12345).

For a visual guide on performing a hard reset to clear a forgotten security code: How To Hard Reset Nokia Phones - Factory Reset Code YouTube• Feb 25, 2021

Unlocking a vintage Nokia 100 (Type RH-130) requires distinguishing between two types of "locks": the Security Code (used to access the keypad) and the Network Unlock Code (used to switch SIM carriers).

Below is a deep guide on how to manage both codes for this specific hardware. 1. Decoding the Network Unlock (SIM Restriction)

If your Nokia 100 displays "SIM Restriction" or "Phone Restricted" when you insert a new SIM card, it is locked to a specific carrier. The Unlocking Formula

To unlock the network, you must enter a specific string using the keypad. This is generally done without a SIM card inserted The String Format: #pw+CODE+1# #pw+CODE+7# for some carriers like Rogers/Fido). How to type special characters: : Press the (star) key three times quickly. : Press the (star) key four times quickly. : Press the (star) key two times quickly. How to get the 'CODE' is a unique 7 to 15-digit number linked to your device's Find your IMEI: on your keypad. Contact your Carrier: Freedom to choose your carrier : Unlocking your

Most original providers (like Vodafone or EE) will provide this code for free if the device is old and out of contract. Third-Party Services: Websites such as UnlockBase DirectUnlocks can generate these codes for a fee using your IMEI. 2. Resetting the Security Code (Keypad Lock) Unlock Nokia 100 (2011 - Microsoft Q&A

The Nokia 100 (Type RH-130)

is a classic 2G feature phone released in 2011, known for its durability and simplicity. Unlocking this device typically refers to two different scenarios: bypassing a forgotten Security Code or removing a Network/SIM Restriction to use the phone with a different carrier. 1. Bypassing the Phone Security Code If your Nokia 100

is asking for a security code to access the menu or keypad, it is likely the device-level lock.

Default Code: The factory default security code for most Nokia phones, including the 100, is 12345.

Hard Reset (Warning: Erases Data): If you have changed the code and forgotten it, you can attempt to reset the phone to factory settings using a hardware key combination: Turn off the phone.

Press and hold the (*) key, (3) key, and the Green Call button simultaneously.

While holding these, press the Power button until the Nokia logo appears.

If successful, the security code will revert to the default 12345.

Secret Reset Code: On the main screen, you can also try typing *#7780# to restore factory settings, which may require the security code (default 12345) to proceed. 2. Network/SIM Unlock Code

If the phone displays "SIM card restricted" or "Enter restriction code" when you insert a SIM card from a different provider, the device is network-locked.

Obtaining the Code: A network unlock code is unique to your phone's IMEI (found by dialing *#06#). These codes must be provided by the original network carrier or a third-party unlocking service.

How to Enter the Unlock Code:Once you have the 7-digit or 15-digit code, follow these steps: Turn on the phone without a SIM card. Enter the sequence: #pw+CODE+1#. To get p: Press the (*) key three times quickly. To get w: Press the (*) key four times quickly. To get +: Press the (*) key two times quickly. The phone should display "SIM Restriction Off" and restart. Technical Specifications (RH-130) Codes for NOKIA 100 - HardReset.info

12345 This is the default security code. press and hold # Lets you switch between lines. HardReset.info Nokia 130 (2023) user guide: Keys and parts - HMD

Unlocking a legacy device like the Nokia 100 (Type RH-130) Go to product viewer dialog for this item.

typically refers to one of two things: resetting a forgotten security code (to access the phone's menu) or removing a network carrier lock (to use a different SIM card). Security Code: The "12345" Legacy For most Nokia handsets, including the

, the factory-set default security code is 12345. This code is required for various functions, such as factory resets or changing certain settings.

Try Default Codes First: Before attempting more complex methods, try common defaults like 12345, 0000, or 1111.

Hard Reset: If the code was changed and forgotten, you can sometimes bypass it by performing a hard factory reset. For many Nokia models, this involves switching off the phone and then simultaneously pressing and holding the Call button, the asterisk key (*), and the number 3 key while turning the device back on. Hold them until the "Nokia" logo appears or the device begins formatting. Network Unlocking: Beyond the Default

Network locks are restrictions placed by service providers (e.g., Vodafone, AT&T) to prevent the phone from working with other carriers. Codes for NOKIA 100 - HardReset.info

12345 This is the default security code. press and hold # Lets you switch between lines. HardReset.info

Unlock Nokia 130 by IMEI. Fast, Safe & Permanent - doctorSIM

Title: Understanding the Nokia 100 (RH-130): Security, Simlocks, and Unlocking Realities

Abstract The Nokia 100, specifically model type RH-130, represents one of the final iterations of Nokia’s legacy "dumbphone" era. Designed for emerging markets and budget-conscious consumers, these devices were often sold with carrier restrictions to subsidize the hardware cost. This paper explores the technical architecture of the Nokia 100 RH-130, the nature of its SIM lock mechanism, the methodologies historically used to retrieve unlock codes, and the current landscape regarding device unlocking.

Important Warnings & Limitations

×