Nokia 130 Rm-1035 Usb Driver |link| — Genuine & Certified

To connect a Nokia 130 (RM-1035) to your PC for data transfer, charging, or firmware flashing, you typically need the Nokia Connectivity Cable Driver or specific MTK (MediaTek) , as this model uses a MediaTek chipset. 1. Key Driver Information Official Driver Name: Nokia Connectivity Cable Driver. Hardware ID: USB\VID_0421&PID_069A USB\VID_0421&PID_06FB Compatibility: Windows XP, 7, 8, 10, and 11 (32-bit & 64-bit). 2. Where to Get the Drivers

While Nokia (HMD Global) no longer provides a dedicated standalone driver page for legacy models, you can find them through these reliable methods:

Installing the USB driver for the Nokia 130 (RM-1035) is necessary for data transfer, flashing firmware, or removing security codes. Since this device uses a MediaTek (MTK) chipset, you typically need the Nokia MTK-specific drivers rather than general Nokia PC Suite drivers. Prerequisites A high-quality Micro-USB cable. A PC running Windows 7, 8, 10, or 11.

Driver Download: You can find the necessary files on technical forums or the official HMD/Nokia support page (though older RM-1035 files are often hosted on driver archives). Installation Steps 1. Automatic Installation

Download the Nokia_Connectivity_Cable_Driver or Nokia_MTK_USB_Driver setup file. Right-click the setup file and select Run as Administrator.

Follow the prompts: Click "Next," accept the terms, and click "Install". Restart your PC to ensure the registry updates correctly. 2. Manual Installation (If Device is "Unknown") If your PC doesn't recognize the phone after step 1: Open Device Manager on your PC. Connect your

to the PC via USB while the phone is turned off (this is crucial for MTK devices to enter "Boot" mode).

Look for an item labeled "MTK6261" or "Unknown Device" that appears briefly.

Right-click it > Update Driver > Browse my computer for drivers.

Point to the folder where you extracted the driver files and click OK. 3. Disabling Driver Signature Enforcement (Windows 10/11)

If the driver fails to install due to "Digital Signature" errors: Hold Shift and click Restart.

Go to Troubleshoot > Advanced options > Startup Settings > Restart. Press 7 or F7 to "Disable driver signature enforcement". Re-run the driver installation. Troubleshooting Tips

To connect a Nokia 130 (RM-1035) to a computer, you primarily need the Nokia Connectivity Cable Driver or specialized MediaTek (MTK) USB drivers

if you are performing advanced tasks like flashing or repairing the device. Essential Drivers for Nokia 130 RM-1035 Nokia Connectivity Cable Driver

: This is the standard driver for basic data transfer and synchronization. Version 7.1.182.0 is widely compatible with Windows XP through Windows 10. You can download it from MediaTek (MTK) USB VCOM Drivers

: Since the RM-1035 uses a MediaTek chipset, these drivers are required for flashing firmware using tools like Miracle Box or Infinity BEST. A common package is the Nokia MTK Driver specifically for Windows 10 64-bit. Installation Guide for Windows 10

Installing these older drivers on modern Windows versions often requires disabling Driver Signature Enforcement because they are not digitally signed for Windows 10. Disable Signature Enforcement and select from the Power menu. Navigate to Troubleshoot Advanced options Startup Settings After the reboot, press (or F7) to "Disable driver signature enforcement". Manual Driver Update

Connect the Nokia 130 to your PC via a USB 2.0 port (USB 3.0 ports sometimes cause connection issues). Device Manager , right-click the "Unknown Device," and select Update driver Browse my computer for drivers

and select the folder where you extracted the downloaded MTK drivers. Microsoft Learn Common Issues & Solutions "Only Charging" Mode nokia 130 rm-1035 usb driver

: If the phone only charges and doesn't show a "Data Storage" menu, try using a USB 2.0 port

instead of USB 3.0. Additionally, ensure a memory card is inserted if you are trying to access storage. Unknown Device Error

: This usually indicates the MTK VCOM driver is missing. Ensure you have installed the "Nokia USB Serial Port" or "MTK USB Port" drivers manually through the Device Manager. Microsoft Learn Are you planning to transfer files or are you trying to flash new firmware onto the device? Installing a USB Driver - Micro Focus

How to Connect and Install Nokia 130 RM-1035 USB Drivers Connecting a classic feature phone like the Nokia 130 (RM-1035)

to a modern PC can sometimes feel like a puzzle. Whether you are trying to transfer photos or need to flash the device to fix a "Contact Service" error, having the right driver is essential. Why You Need the RM-1035 Driver Nokia 130 RM-1035 is a Series 30+ (MediaTek-based) device . Unlike older S40 Nokia phones, it does support the standard Nokia PC Suite . Instead, you primarily need drivers for two reasons: Mass Storage: To transfer files to and from your microSD card. Flashing/Repair:

To use tools like "Infinity Best" or "Miracle Box" to repair software issues. Top Ways to Get the Driver What Nokia Phones Support PC Suite? - Microsoft Q&A

The Nokia 130 (Model RM-1035) remains a popular choice for those seeking a reliable, long-lasting backup phone. Whether you need to transfer contacts, manage files, or perform a firmware update, connecting the device to a PC requires the correct USB driver. This guide provides everything you need to know about the Nokia 130 RM-1035 USB driver. Why You Need the RM-1035 USB Driver

The Nokia 130 does not use a modern smartphone operating system like Android or iOS. Instead, it runs on the Series 30+ platform. Without the specific USB driver installed on your Windows computer, the PC will fail to recognize the device when plugged in via a micro-USB cable. Installing the driver enables several key functions:

Data Transfer: Moving music, photos, and files between your PC and the microSD card.

Contact Management: Backing up your phonebook to a computer.

Software Repairs: Reflashing or updating the phone’s firmware using tools like Nokia Software Recovery Tool or Phoenix Service Tool.

Charging Stability: Ensuring the PC provides the correct voltage for charging via USB. System Requirements and Compatibility

The RM-1035 driver is designed for Windows-based systems. It is generally compatible with: Windows 7 (32-bit and 64-bit) Windows 8 / 8.1 Windows 10 Windows 11 (using Compatibility Mode)

How to Download and Install the Nokia 130 RM-1035 USB Driver Follow these steps to ensure a clean installation:

Step 1: Download the Driver PackageLocate a reputable source for the Nokia Connectivity USB Driver. This is a universal driver package that supports most Nokia feature phones, including the RM-1035.

Step 2: Prepare Your PCBefore installing, disconnect your Nokia 130 from the computer. If you have any old Nokia drivers installed, it is recommended to uninstall them first to avoid software conflicts.

Step 3: Run the InstallerLaunch the setup file (usually an .exe) and follow the on-screen instructions. Select your preferred language and agree to the terms of service. Once the installation is complete, restart your computer to finalize the registry changes.

Step 4: Connect the DeviceSwitch on your Nokia 130 and connect it to the PC using a high-quality micro-USB cable. Your computer should now display a notification stating that the "Nokia 130 RM-1035" or "Nokia USB Parent" device is ready for use. Troubleshooting Common Connection Issues To connect a Nokia 130 (RM-1035) to your

If your phone is still not recognized after installation, try these quick fixes:

Use a Data Cable: Some micro-USB cables are "charge-only" and lack the internal wiring for data transfer. Ensure you are using a verified data cable.

Try a Different USB Port: Avoid using USB hubs or front-panel ports on a desktop. Plug the cable directly into the motherboard ports at the back of the PC.

Update Device Manager: Right-click on 'This PC', go to 'Manage' > 'Device Manager'. If you see a yellow exclamation mark next to an "Unknown Device," right-click it, select 'Update Driver', and point the search to the folder where you installed the Nokia drivers. Conclusion

Having the correct Nokia 130 RM-1035 USB driver is essential for maintaining your device and managing your data. By following the steps above, you can bridge the gap between your classic feature phone and your modern PC, ensuring your contacts and media remain safe and accessible.

The Nokia 130 (RM-1035) requires specific MediaTek (MTK) USB drivers for tasks like flashing firmware, formatting, or data transfer

. Since this device is a feature phone released in 2014, modern Windows systems (10/11) often recognize it as an "Unknown Device" until the correct drivers are manually pointed to. Core Driver Components Depending on your goal, you may need one or both of these: Connectivity Drivers

: Used for general tasks like file transfer and charging. The Nokia Connectivity Cable Driver (Version 7.1.182.0) is the standard package. MTK Flashing Drivers : Required for repair software like Infinity-BEST Miracle Box

. These often appear as "Nokia USB Serial Port" in the Device Manager. How to Install (Windows 10/11)

If the phone is not recognized automatically, follow these manual steps:

You're looking for the USB driver for the Nokia 130 (RM-1035). Here's what I found:

Driver Information:

Download Links:

You can download the Nokia 130 USB driver from the following sources:

  1. Nokia's Official Website: Unfortunately, Nokia's official website no longer provides direct downloads for old device drivers. However, you can try searching for "Nokia USB Drivers" on their website.
  2. Third-Party Websites:

Installation Instructions:

  1. Download the USB driver zip file from one of the above sources.
  2. Extract the contents of the zip file to a folder on your computer (e.g., C:\Nokia\USB_Driver).
  3. Connect your Nokia 130 to your computer using a USB cable.
  4. Turn on your phone and set it to "Mass Storage" or "PC Suite" mode (usually found in Settings > Connectivity > USB).
  5. Open Device Manager on your computer (Press Win + X and select Device Manager).
  6. Look for your Nokia 130 under "Other devices" or "Portable devices".
  7. Right-click on the device and select "Update driver".
  8. Choose "Browse my computer for driver software" and navigate to the extracted driver folder.
  9. Follow the on-screen instructions to complete the driver installation.

Troubleshooting Tips:

Please note that these drivers are for Windows operating systems. If you're using a different OS (e.g., macOS, Linux), you may need to search for specific drivers for that platform.

The Nokia 130 (RM-1035) is a feature phone released in 2014 that requires specific drivers for PC connectivity, primarily for maintenance tasks like flashing or fixing software issues. Because it is a MediaTek-based (MTK) device, standard USB connectivity often requires both general connectivity drivers and specialized flashing drivers. Driver Options Device: Nokia 130 (RM-1035) Driver Type: USB Driver

Nokia Connectivity Cable Driver: This is the standard driver used to establish a basic link between the phone and a PC. It is often part of the Nokia PC Suite or can be downloaded separately as version 7.1.182.

MediaTek (MTK) USB Port Driver: Essential for technical tasks like software repairs or flashing. This driver allows tools like "Infinity Best" to recognize the phone when it is in a "dead" or flashing mode.

USB Serial Port Driver: Required for communication over COM ports, typically version 7.1.32.115 for 64-bit systems. Common Uses for the Driver

Software Repairs: Fixing "Contact Service" errors or blinking keypad lights often requires these drivers and a compatible flash file.

Phone Formatting: Drivers enable the PC to identify the unknown device, allowing tools to format the phone's internal storage or reset security codes.

Data Transfer: Basic drivers allow for simple USB 2.0 connectivity to manage files on an inserted microSD card. Quick Installation Guide (Windows 10/11)

For flashing drivers, Windows' Driver Signature Enforcement must often be disabled: Restart your PC while holding the Shift key.

Navigate to Troubleshoot > Advanced options > Startup Settings > Restart. Press 7 to "Disable driver signature enforcement". Once the PC restarts, connect the Nokia 130 via USB.

Open Device Manager, right-click the "Unknown Device," and select Update driver to manually point to the downloaded driver files. If you'd like, I can help you find:

Ultra-affordable Nokia 130 comes to India - Microsoft Source

This "feature" is designed to help you understand what the driver does, where to get it, and how to install it correctly on a Windows PC.

Q1: Does the Nokia 130 RM-1035 work on Windows 11?

Yes. Despite being a 2014-era phone, the driver works on Windows 11 if you disable driver signature enforcement. No official Microsoft certification exists, but the MediaTek VCOM driver functions reliably.

Troubleshooting Common Nokia 130 USB Driver Issues

Even after installation, problems occur. Here is your troubleshooting checklist.

Error 4: Phone goes into "Charging Only" mode

Cause: The phone's USB mode is set incorrectly. Fix: On your Nokia 130, go to Menu > Settings > Connectivity > USB Mode. Select Mass Storage instead of Charging or PC Suite. Reconnect.

Frequently Asked Questions (FAQ)

📋 Overview

The Nokia 130 (RM-1035) is a feature phone. Unlike smartphones (Android/iOS), it does not require a complex PC Suite for basic file transfers. However, it requires a specific Media Transfer Protocol (MTP) Driver or Nokia Connectivity Driver to communicate effectively with a Windows computer.

Primary Function: Enables the Windows OS to recognize the Nokia 130 when connected via USB, allowing for file management (transferring photos, music, and videos) and charging.

Step 2: Download the Driver

Official vs. Generic Drivers: Which One Do You Need?

You will find two main types of drivers online. Here is the honest breakdown:

  1. Official Nokia USB Driver (Recommended): Comes packaged with Nokia Suite (legacy) or the generic Nokia Connectivity Cable Driver. These are signed by Microsoft and work best for MTP file transfers on Windows 7, 8, and 10.
  2. Flashing Drivers (For Advanced Users): If you intend to use third-party flashing boxes (like JAF, ATF, or Infinity), you need Nokia/FBUS Flash Drivers. These often require disabling driver signature enforcement on Windows 10/11.

For 95% of users (file transfer & charging), the standard Nokia USB Generic Driver is sufficient.