Nokia 1.4 Imei Repair (2025)

To repair the IMEI on a Nokia 1.4, you'll typically need to use specific software tools and follow a series of steps that involve creating a backup of your current IMEI, modifying it if necessary, and then restoring it. However, it's crucial to note that altering your device's IMEI can be against the law in some jurisdictions and may void your warranty. Always ensure you have a legitimate reason and the legal right to make such changes.

What is an IMEI?

The International Mobile Equipment Identity (IMEI) is a 15-digit unique code that identifies your specific handset to the network. Think of it as a social security number for your phone. Every legitimate Nokia 1.4 has a unique IMEI printed on the original box and under the back cover.

Step 1: Backup Existing IMEI

Dial *#06# on your Nokia 1.4 to retrieve your current IMEI number.
Write down the IMEI number for future reference.

Part 5: Troubleshooting Common Nokia 1.4 IMEI Repair Errors

| Error Message | Solution | | :--- | :--- | | "Status_Device_Exception" | Your phone isn't in META mode. Reboot and re-enter Volume Down + USB. | | "S_BROM_CMD_STARTCMD_FAIL" | Driver issue. Uninstall all old Mediatek drivers and reinstall the specific VCOM drivers. Use a USB 2.0 port, not 3.0. | | "IMEI remains 0 after write" | You used the wrong DB files. Extract firmware again and ensure you pick the correct APDB and BP files for your exact Nokia 1.4 sub-model. | | "Baseband Unknown" | Hardware failure. The modem partition is dead. This usually requires a motherboard replacement, not software repair. |

Why Does the Nokia 1.4 Lose Its IMEI?

Three common scenarios corrupt the IMEI partition on a Nokia 1.4: nokia 1.4 imei repair

Failed Firmware Flashing: Using unauthorized tools (like SP Flash Tool) to upgrade or downgrade the OS often wipes the NVRAM (Non-Volatile Random Access Memory) where the IMEI is stored.
Incorrect Factory Reset: Rarely, a corrupted cache partition during a reset leads to IMEI=0 or IMEI=Null.
Hardware Damage: A damaged motherboard or eMMC chip can physically unmap the IMEI sector.

Step 2: Enable USB Debugging

Go to your device’s Settings > About phone > Build number, and tap on it 7 times to enable Developer options.
Return to Settings > Developer options > Enable USB debugging.

Method B: Full Firmware Re-flash + Engineer Mode Repair

If Method A fails (e.g., baseband is entirely missing), perform a full flash first:

Step 1: Flash Stock ROM with SP Flash Tool

Install SP Flash Tool. Open flash_tool.exe.
Click "Scatter-loading" and select the MT6761_Android_scatter.txt from your firmware folder.
Set "Download Only" mode (Do NOT use "Format All + Download" – that erases IMEI permanently!).
Turn off your Nokia 1.4.
Click "Download" then connect the turned-off phone via USB.
Wait for a green checkmark. Disconnect.

Step 2: Access Engineer Mode (Alternative to Maui META) To repair the IMEI on a Nokia 1

After flashing, install an "Engineer Mode" app from Play Store (e.g., "MTK Engineering Mode").
Open the app → MTK Settings → Connectivity → CDS Information → Radio Information.
Select Phone 1.
At the top, type: AT +EGMR=1,7,"YOUR_IMEI_1" (No spaces after +).
Press "Send AT Command."
For SIM 2, type: AT +EGMR=1,10,"YOUR_IMEI_2".
Reboot.

Note: This AT command method is unreliable on Android 11+ Nokia phones. We strongly recommend Method A.

Step 3: Connect to PC and Flash IMEI

Install Drivers: Ensure you have the proper USB drivers installed on your computer. You can use tools like SP Flash Tool or specific Nokia drivers.
Launch IMEI Repair Tool: Open the MRT tool or equivalent software. Dial *#06# on your Nokia 1
Connect Device: Connect your Nokia 1.4 to the computer using a USB cable.
Detect Device: The software should detect your device. Follow on-screen instructions to proceed.
Enter New IMEI: Input the desired IMEI (ensure it’s a valid, non-duplicated number).
Write IMEI: Click on the “Write IMEI” or similar button to apply the changes.