Nitocote Pe135 Msds _top_ 【100% WORKING】

Nitoxote PE135 MSDS Guide

Introduction

Nitoxote PE135 is a high-performance, polyethylene-based coating material used for various industrial applications. The Material Safety Data Sheet (MSDS) provides critical information on the safe handling, use, storage, and disposal of this product. This guide summarizes the key points from the Nitoxote PE135 MSDS.

Product Identification

• Product Name: Nitoxote PE135
• Product Description: A polyethylene-based coating material
• Manufacturer: [Insert manufacturer's name]

Hazards Identification

• Classification: The product is classified as a non-hazardous substance according to the Globally Harmonized System of Classification and Labelling of Chemicals (GHS).
• Hazards:
  • May cause eye and skin irritation.
  • May cause respiratory tract irritation if inhaled.

Composition/Information on Ingredients

• Chemical Name: Polyethylene
• CAS Number: [Insert CAS number]
• Molecular Formula: [Insert molecular formula]
• Molecular Weight: [Insert molecular weight]

First Aid Measures

• Eye Contact: Flush eyes with water for at least 15 minutes. If irritation persists, seek medical attention.
• Skin Contact: Wash affected area with soap and water. If irritation persists, seek medical attention.
• Inhalation: Move to fresh air. If respiratory irritation occurs, seek medical attention.
• Ingestion: Not considered a likely route of exposure. If ingested, seek medical attention.

Fire-Fighting Measures

• Extinguishing Media: Use dry chemical, foam, or water to extinguish fires.
• Special Fire-Fighting Procedures: Wear self-contained breathing apparatus and protective clothing.

Accidental Release Measures

• Spill Response: Contain spills and clean up with a suitable absorbent material. Dispose of waste according to local regulations.

Handling and Storage

• Handling: Handle with care to avoid eye and skin contact. Use in well-ventilated areas.
• Storage: Store in a cool, dry place, away from incompatible materials.

Exposure Controls/Personal Protection

• Engineering Controls: Use ventilation systems to control airborne concentrations.
• Personal Protective Equipment:
  • Gloves: Wear protective gloves to prevent skin contact.
  • Eye Protection: Wear safety glasses to prevent eye contact.
  • Respiratory Protection: Wear a respirator if ventilation is inadequate.

Physical and Chemical Properties

• Appearance: [Insert appearance, e.g., white, powder]
• Melting Point: [Insert melting point]
• Boiling Point: [Insert boiling point]
• Solubility: [Insert solubility]

Stability and Reactivity

• Stability: Stable under normal conditions.
• Reactivity: May react with incompatible materials.

Toxicological Information

• Acute Toxicity: Not considered toxic.
• Chronic Toxicity: May cause long-term effects from repeated exposure.

Ecological Information

• Environmental Fate: Not expected to be harmful to the environment.

Disposal Considerations

• Disposal Methods: Dispose of waste according to local regulations.

Transport Information

• UN Number: [Insert UN number]
• Transport Classification: [Insert transport classification]

Regulatory Information

• Regulatory Compliance: Compliant with [insert regulatory requirements].

Other Information

• Revision Date: [Insert revision date]
• MSDS Prepared By: [Insert name]

Understanding Nitocote PE135: Safety, Composition, and Protective Properties

Nitocote PE135 is a high-performance, single-component protective coating and curing compound manufactured by Fosroc. Based on a hydrophobic polyester resin, this water-based emulsion is primarily used for waterproofing and corrosion protection of concrete substrates, especially in underground structures and foundations.

The Safety Data Sheet (SDS)—formerly known as the Material Safety Data Sheet (MSDS)—is a critical document for understanding the product's chemical makeup and necessary safety precautions for handling, storage, and transport. 1. Composition and Hazard Identification

Nitocote PE135 is marketed as an eco-friendly, non-toxic alternative to traditional coatings.

Key Components: The viscous grey liquid contains ingredients such as talc and silica flour.

Safety Profile: Unlike many industrial coatings, it is entirely free from hazardous materials such as coal tar pitch, asbestos, and hydrocarbon-based solvents.

Health Hazards: While generally safe, the SDS identifies potential risks such as serious eye irritation and potential skin sensitivity in some individuals. 2. Safety Precautions and First Aid

Proper handling as outlined in the SDS ensures safe application and minimizes environmental impact. Fosroc Nitocote PE135 - Petroline Technical Services

Nitocote PE135 is a single-component, high-performance protective coating based on hydrophobic polyester resin. Designed by Fosroc, it serves as an eco-friendly barrier for concrete substrates, offering exceptional resistance to chemical exposure and abrasion.

Understanding the Material Safety Data Sheet (MSDS)—now more commonly referred to as the Safety Data Sheet (SDS)—is critical for ensuring the safe handling, application, and storage of this product. Core Properties & Chemical Composition

As per the Nitocote PE135 Safety Data Sheet, the product is a grey, viscous liquid miscible with water. It is formulated to be free from hazardous materials like coal tar pitch, hydrocarbon-based solvents, and aromatic amines. Key Ingredients (SDS Section 3): Talc (5–10%): Can cause eye irritation (H319).

Silica Flour (1–5%): Associated with eye irritation and respiratory system irritation (H335). nitocote pe135 msds

Formaldehyde (<1%): Present in trace amounts; however, it is classified as a skin sensitizer and suspected carcinogen in concentrated forms. Hazard Identification (SDS Section 2)

While Nitocote PE135 is generally marketed as non-toxic and eco-friendly, the Safety Data Sheet from Scribd notes several health hazards:

Skin Contact: Corrosive to skin and may cause sensitization or allergic reactions in sensitive individuals. Eye Contact: Causes serious eye damage. Inhalation: May cause respiratory system irritation. Ingestion: Classified as toxic if swallowed. Safe Handling and Personal Protection (SDS Section 8)

To mitigate risks, users should follow the exposure controls detailed in the Fosroc Nitocote PE135 Guidelines: Fosroc Nitocote PE135 Technical Datasheet - Scribd

Nitocote PE135 is an eco-friendly, single-component protective coating based on hydrophobic polyester resin. It is commonly used for corrosion protection on concrete substrates, foundations, and as a curing compound. Safety & Hazard Summary

While Nitocote PE135 is water-based and free from many common carcinogens like coal tar pitch, the Safety Data Sheet (SDS) still highlights important precautions: Petrolinetech Eye Contact : Can cause serious eye damage or irritation. Skin Contact

: May cause sensitisation or allergic reactions in sensitive individuals. Inhalation

: Prolonged inhalation of high concentrations may damage or irritate the respiratory system. : Toxic if swallowed. Handling & Personal Protection To ensure safe application, follow these recommended guidelines: Petrolinetech Protective Gear

: Wear tight-fitting chemical splash goggles, protective gloves, and appropriate clothing.

: Use barrier creams (e.g., Kerodex Antisolvent). If the product touches skin, wash immediately with soap and water; do not use solvents for cleaning skin. Ventilation

: Ensure adequate general and local exhaust ventilation when working in confined spaces.

: Store in a cool, dry, well-ventilated area in original containers at temperatures not exceeding 40°C. Application Guide Nitocote PE135 Data Sheet | PDF - Scribd

Nitocote PE135 is an eco-friendly, single-component protective coating based on hydrophobic polyester resin

. Below is the summary of safety and technical data derived from the SDS and Technical Data Sheets Section 1: Product Identification Product Name Nitocote PE135 Manufacturer Fosroc International Limited Primary Use

: Waterproofing and chemical-resistant protective coating for concrete substrates. www.aquaproofpune.com Section 2: Hazard Identification Classification Nitoxote PE135 MSDS Guide Introduction Nitoxote PE135 is

: Generally considered non-toxic and free from hazardous materials like coal tar, pitch, or aromatic hydrocarbons.

: While non-hazardous in standard use, concentrated vapors should be avoided. Some individuals may be sensitive to resins, leading to potential skin irritation or allergic reactions. Section 4 & 6: First Aid & Accidental Release Skin Contact

: Remove contaminated clothing and wash skin with soap and water or resin-removing creams. Do not use solvents for cleaning skin. Eye Contact

: Flush immediately with plenty of water for at least 15 minutes and seek medical advice.

: Clean up with water while the material is still damp. If allowed to dry, mechanical removal (scouring) is required. Section 8: Exposure Controls & Personal Protection Ventilation : Ensure adequate ventilation in the work area.

: Wear chemical-resistant, impervious gloves (neoprene recommended). Eye Protection : Wear safety glasses or goggles. Skin Protection

: Wear appropriate protective clothing to prevent skin contact; barrier creams may also be used. Section 9: Physical & Chemical Properties Appearance : Grey-colored viscous liquid. Specific Gravity : 1.28 to 1.36. : 6.0 – 8.0. Solids Content : ~53.8% – 55% by weight. Drying Time : 35–40 minutes at 20°C. Petrolinetech Section 10: Stability & Reactivity : Stable under normal ambient temperatures. Incompatible Materials

: Avoid contact with strong acids, strong bases, and strong oxidizing agents.

: For the full, region-specific safety document, you can download it directly from the Fosroc Product Page by selecting your country. chemical resistance levels for a particular project? Nitocote PE135 Safety Data Sheet | PDF | Toxicity - Scribd

SECTION 10: STABILITY AND REACTIVITY

• Stability: Stable under recommended storage conditions.
• Conditions to Avoid: Heat, flames, and sources of ignition. Static discharge.
• Materials to Avoid: Strong oxidizing agents, strong acids, and strong bases.
• Hazardous Decomposition Products: Carbon oxides, nitrogen oxides.

---

Section 5: Firefighting measures

• Flash point: >100°C (solvent-free) – not easily ignited.
• Extinguishing media: CO₂, foam, dry chemical, water fog.
• Hazardous combustion products: CO, CO₂, nitrogen oxides, smoke.

SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY

1.1 Product Identifier

• Product Name: Nitocote PE135 (Part A & Part B)
• Product Type: Two-pack epoxy coating.

1.2 Relevant Identified Uses

• Used as a protective coating for concrete and steel structures, water tanks, and pipes.

1.3 Details of the Supplier

• Manufacturer: Fosroc International Ltd.
• Address: Drayton Manor Business Park, Coleshill Road, Tamworth, B78 3XN, UK.
• Emergency Telephone: Check local Fosroc emergency contact numbers.

---

SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION

8.1 Exposure Limits (Typical)

• Xylene: OSHA PEL 100 ppm; ACGIH TLV 100 ppm.
• MEK: OSHA PEL 200 ppm; ACGIH TLV 200 ppm.

8.2 Personal Protective Equipment (PPE)

• Respiratory Protection: If ventilation is insufficient, use a combined organic vapor/particulate respirator (e.g., ABEK filter).
• Hand Protection: Use chemical-resistant gloves (nitrile rubber or PVA). Breakthrough time should be > 8 hours for optimal protection.
• Eye Protection: Wear chemical safety goggles or a face shield.
• Body Protection: Wear anti-static clothing and safety boots.

---

Composition / ingredients (typical)

• Epoxy resin — may cause skin/eye irritation; possible sensitizer.
• Amine curing agents (e.g., aliphatic/aromatic amines) — corrosive, skin sensitizers, harmful by inhalation.
• Solvent(s) (if solvent-based) — e.g., xylene, ethylbenzene, cyclohexanone, or similar: flammable, CNS depressants, may cause dizziness/headache.
• Additives/fillers/pigments — inorganic pigments (e.g., titanium dioxide), extenders; may be inert but dusts can irritate.

(Note: Exact formulation, CAS numbers and concentrations must be obtained from the manufacturer SDS for regulatory or compliance use.) Hazards Identification

Toxicological information (summary)

• Acute toxicity: Low to moderate via dermal or oral routes depending on formulation.
• Skin corrosion/irritation: May cause irritation.
• Serious eye damage/irritation: Causes eye irritation.
• Respiratory/skin sensitization: Certain amine hardeners can sensitize.
• Carcinogenicity/reproductive toxicity: No data here — consult manufacturer SDS for IARC/NTP listings or ingredient-specific assessments.