NALCO TRAC 115: A Comprehensive Guide to Safety and Performance
NALCO® TRAC115 is a specialized liquid corrosion inhibitor primarily utilized in industrial water treatment systems. This guide provides a detailed overview of the technical specifications, safety protocols, and regulatory compliance information typically found in a Nalco TRAC 115 MSDS (Material Safety Data Sheet). Product Overview and Use
NALCO TRAC115 is engineered for corrosion inhibition in cooling water systems. It is often part of a broader water treatment program, such as the Ecolab 3D TRASAR™ technology, which monitors and controls chemical feed rates for optimal performance. Primary Function: Corrosion and scale control.
Applications: Used in high or low-temperature closed cooling water systems, including internal combustion engines, compressors, and chiller systems.
Target Metals: Protects a variety of metals such as cast iron, mild steels, and copper. Key Safety Information (MSDS Summary)
Based on safety guidelines, NALCO TRAC115 is classified as a hazardous industrial chemical. Hazard Classifications
Physical Hazards: It is a strong oxidizer and a combustible liquid.
Health Hazards: Toxic if swallowed and causes irritation to eyes and skin.
NFPA/HMIS Ratings: Typically rated as a Level 2 Health Hazard (Moderate). First Aid Measures In the event of exposure, immediate action is critical:
Eye Contact: Rinse immediately with water for at least 15 minutes and seek medical advice.
Skin Contact: Wash thoroughly with soap and water; remove contaminated clothing.
Ingestion: Do NOT induce vomiting. Rinse mouth with water and seek emergency medical attention. Personal Protective Equipment (PPE)
When handling NALCO TRAC115, the following PPE is recommended to prevent contact: SAFETY DATA SHEET NALCO® TRAC114 PLUS
Date prepared: April 18, 2026 (Representative data – replace with current date if reissuing).
Reason for revision: New report format.
Key references: Ecolab/Nalco Water internal SDS for fluorescent tracer dyes; GHS Rev. 8.
NFPA 704 Rating (0-4):
HMIS III Rating:
END OF REPORT
Recommendation: For an official, lot-specific SDS, contact Nalco Water customer service at +1-630-305-1000 or visit their online document portal with the exact product code and batch number.
You're looking for information on NALCO Trac 115, specifically its Material Safety Data Sheet (MSDS). Here's what I found:
What is NALCO Trac 115?
NALCO Trac 115 is a product from Ecolab, a leading provider of water, hygiene, and energy technologies. It's a corrosion inhibitor and scale preventative treatment used in industrial water systems, particularly in oil and gas, power generation, and chemical processing applications.
MSDS Overview
The MSDS (now known as Safety Data Sheet or SDS) for NALCO Trac 115 provides critical information on the product's hazards, handling, storage, and emergency procedures. Here are some key points from the SDS: nalco trac 115 msds
Product Composition:
NALCO Trac 115 is a liquid solution containing:
Hazards Identification:
First Aid Measures:
Handling and Storage:
Ecological Information:
These details are general and based on available data. For specific guidance, consult the official SDS from Ecolab or the manufacturer.
is an industrial chemical, specifically used as a corrosion inhibitor
or water treatment additive in systems like cooling towers. It is classified as a strong oxidizer and is toxic if swallowed. Nuclear Regulatory Commission (.gov)
Below is a summary of the critical safety and handling information based on available data: Product Overview Manufacturer: Nalco Water (an Classification: Strong Oxidizer, Combustible Liquid. Industrial Use:
Primarily used for water treatment to prevent scale and corrosion in industrial cooling systems. Hazard Identification (NFPA/HMIS) 2 (Moderate Hazard). Flammability:
0 (Non-flammable, though it is a combustible liquid and strong oxidizer). Reactivity: 0 (Insignificant). Specific Hazards: May evolve oxides of nitrogen or carbon under fire conditions. Safety & Handling Measures Personal Protection:
Wear suitable protective clothing, gloves, and eye/face protection.
Ensure adequate ventilation; avoid breathing mist, vapors, or spray.
Use certified respirators if concentrations exceed exposure limits. Safe Storage:
Keep out of reach of children and store in a tightly closed, labeled container. Compatible Materials:
Stainless Steel 316L, CPVC, HDPE, Polypropylene, PVC, and PTFE. Emergency Actions: In Case of Contact: Immediately seek medical advice for eye contact.
Ensure clean-up is conducted only by trained personnel. Keep people away and upwind of the leak.
Use extinguishing media appropriate for surrounding fire. Firefighters should wear full-face positive-pressure self-contained breathing apparatus (SCBA). files.dep.state.pa.us Regulatory & Official Access Official SDS Access:
You can search for the most current Safety Data Sheet (SDS) via the Ecolab SDS Search Portal Emergency Contact:
In the event of a chemical emergency or spill, call the local emergency number listed on your specific product label or the Ecolab Emergency Contact page emergency contact number specific to your region or more details on compatible materials for storage tanks? Safety Data Sheets - SDS - MSDS - Ecolab
To prepare a write-up for NALCO® TRAC115, you should follow the standard 16-section Safety Data Sheet (SDS) format [33, 35]. While specific data for TRAC115 is often restricted to proprietary Ecolab/Nalco customer portals, it is a closed-loop water treatment chemical—typically a nitrite-based corrosion inhibitor [12, 14].
Below is a structured template and key details for your write-up based on standard Nalco TRASAR/TRAC product safety protocols. 1. Identification Product Name: NALCO® TRAC115
Recommended Use: Corrosion inhibitor for closed-loop cooling and heating systems [12]. Manufacturer: Nalco Water (an Ecolab company). NALCO TRAC 115: A Comprehensive Guide to Safety
Emergency Contact: For official documents, request a direct copy via the Nalco Water SDS Request Form [7, 23]. 2. Hazard Identification
Classification: Likely classified as Harmful if swallowed and an Eye/Skin Irritant [4, 19].
Warning: Many TRAC products contain sodium nitrite. If swallowed, substances can lead to the formation of methemoglobin (methemoglobinemia), which reduces oxygen in the blood [4]. Signal Word: DANGER or WARNING [19]. 3. Composition / Information on Ingredients
Common Active Ingredients: Sodium Nitrite, Borates, or Organic Corrosion Inhibitors [4, 15].
Note: Specific concentrations are proprietary and listed in Section 3 of the official SDS. 4. First-Aid Measures
Eye Contact: Rinse immediately with plenty of water for at least 15 minutes. Seek medical advice [4, 6].
Skin Contact: Wash immediately with soap and water. Remove contaminated clothing [6].
Ingestion: Do NOT induce vomiting. Rinse mouth and drink water. Call a physician immediately [4, 6]. Inhalation: Remove to fresh air. Treat symptomatically [6]. 5. Fire-Fighting Measures
Flammability: Not flammable or combustible in liquid form [4].
Special Hazards: If allowed to dry, nitrite components act as oxidizing agents and can initiate combustion of other materials. May evolve oxides of nitrogen (NOx) under fire conditions [4, 21]. 6. Accidental Release Measures
Personal Precautions: Wear appropriate PPE. Prevent skin/eye contact [6].
Environmental Precautions: Prevent discharge into sewers or public waters [6].
Cleanup: Soak up with inert absorbent material (sand, silica gel). Dispose of according to local regulations [6]. 7. Handling and Storage
Handling: Use only with adequate ventilation. Do not get in eyes or on skin [3, 4].
Storage: Keep container tightly closed in a cool, dry, well-ventilated place. Protect from freezing [14, 17].
Incompatible Materials: Keep away from acids and reducing agents [14]. 8. Exposure Controls / Personal Protection
Engineering Controls: General ventilation is typically sufficient [9]. Eye Protection: Wear chemical splash goggles [9].
Skin Protection: Wear standard protective clothing and chemical-resistant gloves (e.g., Nitrile or PVC) [3, 9]. Summary of Physical Properties Typical Value (based on similar TRAC products) Physical State Color Yellow to Amber Odor Mild / None pH (100%) Alkaline (approx. 10.0 - 13.0) Solubility Completely soluble in water
For the most accurate and legally compliant write-up, you must download the official document through the Ecolab SDS Search Portal using the specific product code [22, 25].
NALCO® TRAC115 is an industrial chemical product primarily used in water treatment systems. Based on available safety guidelines, it is classified as a strong oxidizer toxic if swallowed Product Overview Primary Function:
Industrial water treatment (often part of closed-loop or cooling water systems). Physical Form:
Typically supplied in liquid form for industrial applications. Packaging: Commonly found in 37 kg net weight containers. Shelf Life:
Typical shelf life is approximately 12 months (e.g., manufactured March 2025, expires March 2026). vuhoangchem.com Hazard Identification
The product carries several significant health and physical hazards: Oxidizing Agent: Health: 1 (mild irritant) Flammability: 0 (will not
As a strong oxidizer, it can intensify fires and may react violently with combustible materials. Acute Toxicity: Highly toxic if ingested. Skin/Eye Irritation:
Likely causes severe irritation or burns upon contact, similar to related products in the Trac series (like Nalco Trac114 Plus Environmental Hazard:
Industrial water treatment chemicals are often toxic to aquatic life and should not be discharged directly into the environment. Safety and Handling Procedures Requirement Personal Protection
Wear chemical-resistant gloves (Nitrile/PVC), safety goggles, and a face shield.
Store in a cool, dry place. Keep container tightly closed and away from children. Incompatibilities
Keep away from strong acids and flammable/combustible materials due to its oxidizing nature. Ventilation
Use only in well-ventilated areas to avoid inhalation of vapors. First Aid Measures In the event of exposure, immediate action is required: SAFETY DATA SHEET NALCO® TRAC114 PLUS
Nalco TRAC 115 — Material Safety Data Sheet (MSDS) overview
Nalco TRAC 115 is a commercial water-treatment product used to control scale, corrosion, and deposits in industrial cooling systems. The product’s MSDS provides essential information for safe handling, storage, and emergency response; below is a vivid, user-friendly summary of the key points you’d find in that safety document.
What it is and what it looks like
Hazards at a glance
Safe handling and storage
First aid basics
Spill and emergency response
Exposure controls and PPE
Environmental considerations
Regulatory and transport information
Why the MSDS matters
Need the exact MSDS?
GHS Classification (Generally Not Classified as Hazardous): Under normal industrial use, NALCO TRAC 115 is typically not classified as a hazardous substance according to OSHA HCS 2012 (29 CFR 1910.1200) or GHS. However, it may cause mild irritation.
Label Elements:
Other Hazards:
Before reviewing the MSDS, it is essential to understand the product’s application. Nalco TRAC 115 is typically a liquid alkaline formulation containing:
Because it is designed for high-temperature, high-pressure environments, the concentrated product itself can be hazardous. The MSDS addresses the concentrated form before dilution.