Nalco 8514 - Plus Msds Verified !!top!!

Common Use: Water treatment, specifically for solids/liquid separation and clarification.

Chemical Family: Anionic polymer or organic coagulant (specific formulations vary by region). Hazard Identification

GHS Classification: Generally classified as non-hazardous under standard conditions, but can cause mild irritation.

Physical Hazards: Spills are extremely slippery. This is the primary physical hazard associated with polymer-based water treatments. Eye Contact: May cause slight redness or watering.

Skin Contact: May cause mild irritation with prolonged exposure. nalco 8514 plus msds verified

Inhalation: Not expected to be a route of exposure unless misted; mists may irritate the respiratory tract. First Aid Measures

Eyes: Flush immediately with plenty of water for at least 15 minutes. Seek medical attention if irritation persists.

Skin: Wash with soap and water. Remove contaminated clothing and wash before reuse.

Ingestion: Do not induce vomiting. Give small sips of water and seek medical advice. Inhalation: Move to fresh air. Handling and Storage Section 4: Key Safety Data Extracted from the

Safe Handling: Wear appropriate personal protective equipment (PPE), including safety glasses and gloves. Avoid creating mists.

Storage: Store in a cool, dry, well-ventilated area. Keep containers closed when not in use.

Spill Cleanup: Do not use water initially, as it will make the surface dangerously slippery. Use an absorbent material (sand, sawdust, or commercial absorbent) to soak up the liquid. Environmental & Disposal

Environmental Impact: Large spills should be prevented from entering waterways. Common Use: Water treatment

Disposal: Dispose of in accordance with local, state, and federal regulations. It is generally not considered a RCRA hazardous waste unless contaminated by other materials.

Note: This report is for informational purposes. You should always consult the official manufacturer-issued SDS provided by Ecolab/Nalco Water for the most current regulatory compliance and safety data specific to your region.

⚠️ IMPORTANT DISCLAIMER: This content is for informational purposes only. It is based on typical product data for Nalco 8514 Plus but is not an official, legally binding Material Safety Data Sheet (MSDS) or Safety Data Sheet (SDS). For regulatory compliance, workplace safety, and emergency response, you must obtain the specific SDS from the manufacturer (Ecolab/Nalco) corresponding to your specific batch and region.

Section 4: Key Safety Data Extracted from the Verified MSDS

Below is a summary of typical data found on a verified Nalco 8514 Plus MSDS. Note: Do not use this article as your MSDS. Always refer to your verified document.

| Parameter | Typical Information | | :--- | :--- | | Product Identifier | Nalco 8514 Plus Microbiocide | | Manufacturer | Nalco Water, an Ecolab Company | | Signal Word | Danger | | Hazard Statements | H314 – Causes severe skin burns and eye damage. H318 – Causes serious eye damage. H400 – Very toxic to aquatic life. | | Precautionary Statements | P280 – Wear protective gloves/protective clothing/eye protection. P305+P351+P338 – IF IN EYES: Rinse cautiously with water for several minutes. | | OSHA Regulatory Status | This product is classified as hazardous under 29 CFR 1910.1200 (HazCom 2012). | | Appearance | Amber liquid | | Odor | Pungent, sulfurous | | pH (100%) | 12.5 (typical) | | Specific Gravity | ~1.05–1.15 |

7. Accidental Release Measures

  • Summarize containment, cleanup methods, and environmental precautions.
  • Verify compatibility with local spill-reporting regulations.

Nalco 8514 Plus: Safety & Handling Guide