Nako Na-613d Disable Alarm

Here are a few ways to write this, depending on where you need to use the text:

Option 1: Instruction Manual Style (Step-by-Step) How to Disable the Alarm on the Nako NA-613D nako na-613d disable alarm

Locate the ALARM button on the front panel.
Press the ALARM button briefly. The alarm icon should disappear from the display, indicating the alarm has been turned off.
If the alarm is currently sounding, press any button (usually SNOOZE or ALARM) to stop the noise temporarily. To permanently disable it, slide the alarm switch to the "OFF" position.

Option 2: Short & Direct "To disable the alarm on the Nako NA-613D, press the Alarm button until the alarm icon disappears from the screen." Here are a few ways to write this,

Option 3: Technical/Status Log "Device: Nako NA-613D. Action: Alarm function disabled." Locate the ALARM button on the front panel

Method 3: Physically Disable the Internal Buzzer (Hardware Method)

If SMS and app commands fail, or you want to permanently silence the Nako NA-613D’s audible beeping, you can disconnect the internal speaker. This voids warranty and requires basic electronics skill.

3. Temporarily silence (recommended first)

Press and hold the front test/silence button for 5–10 seconds. This mutes many alarms for a limited time (typically 8–15 minutes).
If there’s a separate “hush” or “silence” icon/button, use that per the same hold duration.

Step 1: Identify the Admin Number

The Nako NA-613D must have your phone number pre-set as the admin. If you haven’t set one, the first authorized number to contact the tracker becomes admin by default.

Summary: Quick Reference Card for “nako na-613d disable alarm”

| Method | Command / Action | |--------|------------------| | SMS disable all alarms | 123456 alarm off | | SMS shock off | 123456 shock off | | SMS speed off | 123456 speed off | | App method | Settings → Alerts → Toggle OFF | | Hardware method | Remove buzzer (permanent) | | Factory reset | 123456 factory |