Mxq Amlogic S805 Android 511 Lollipop Download Install _verified_ May 2026

The Ultimate Guide to the MXQ Amlogic S805: Downloading, Installing, and Reviving Android 5.1.1 Lollipop

Introduction

The MXQ Amlogic S805 TV box was a staple of the budget Android media player market during the mid-2010s. For many, it was their first introduction to turning a "dumb" TV into a Smart TV. Running on the quad-core Amlogic S805 processor and originally shipping with Android 4.4 KitKat (and later updated to Android 5.1.1 Lollipop), these little black boxes were workhorses.

However, time has not been kind to the software. Many units suffer from sluggish performance, outdated Kodi versions, or boot loops. If you are holding one of these devices, you might think it’s time for the trash. But with a bit of effort, you can breathe new life into it by flashing a fresh stock firmware.

This deep-dive article covers everything you need to know about the MXQ S805, focusing on locating the correct Android 5.1.1 Lollipop firmware, the installation process, and the risks involved.

Introduction: Why Your MXQ S805 Still Matters

The MXQ series of Android TV boxes, powered by the Amlogic S805 chipset, was a cornerstone of the early cord-cutting movement. While newer boxes feature Android 10, 11, or 12, millions of users still rely on the S805 for basic streaming, Kodi 17.6, and IPTV.

However, over time, these boxes suffer from:

Boot loops (stuck on the MXQ logo).
Wi-Fi/Bluetooth failure after automatic updates.
App incompatibility due to outdated system libraries.
Remote control unresponsiveness.

The solution? A clean, manual installation of the last stable firmware: Android 5.1.1 Lollipop. mxq amlogic s805 android 511 lollipop download install

This article provides verified download links and a fail-safe installation guide for the MXQ (S805) Android 5.1.1 Lollipop ROM.

Direct Download Steps

Go to chinagadgetsreviews.com → Search “MXQ S805 firmware 5.1.1”.
Look for the “MXQ S805 Android 5.1.1 Lollipop WiFi RTL8188 RTL8723 XR819” post.
Click the Google Drive / MEGA mirror (avoid ad-filled shorteners).
Extract the .rar or .7z archive using 7-Zip to get the .img file.

Alternative: Search FreakTab.com forums for “S805 MXQ firmware 5.1.1 final”.

Step 1: Install the Tool

Run the Amlogic USB Burning Tool installer on your PC. Once installed, open the program. You may need to switch the language to English via the "File" menu if it defaults to Chinese.

Troubleshooting

"Get Key Failed" Error: This usually means the USB drivers are not installed correctly. Reinstall the drivers found in the Burning Tool folder.
Stuck at Boot Logo: Try a different firmware file. Since MXQ S805 boxes were made by many different manufacturers, you may need to try a firmware file from a different manufacturer to match your specific hardware revision.
Remote Not Working: Some firmware versions change the remote control configuration. Try using a USB mouse to navigate the initial setup if your IR remote stops working.

Updating an older MXQ TV box (Amlogic S805) to Android 5.1.1 Lollipop is possible using unofficial firmware, as the stock version typically stops at Android 4.4 KitKat. This upgrade is often based on firmware adapted from the K1 TV box. Preparation and Requirements

Hardware Variants: There are many MXQ board variations. This firmware works best on "HD" and "Q" models but may not work on versions with only 512MB of RAM, such as the Blink or M21D models.

Essential Tools: You will need a microSD card (formatted to FAT32) and a "toothpick" or similar thin object to reach the reset button hidden inside the AV port. The Ultimate Guide to the MXQ Amlogic S805:

Firmware Files: You typically need a firmware archive containing recovery.img, an OTA .zip system file, and a factory_update_param.aml instruction file. Installation Steps (SD Card Method)

Prepare the Card: Extract the downloaded firmware and copy the files (including recovery.img and the system .zip) directly to the root directory of your microSD card. Enter Recovery Mode: Unplug the power from the MXQ box. Insert the microSD card.

Insert a toothpick into the AV port and hold down the reset button until you feel a click.

While holding the button, plug in the power and wait until the recovery screen appears (roughly 15 seconds). Flash the Firmware:

If using TWRP recovery, select Install, navigate to your SD card, and select the firmware .zip file.

If using Stock recovery, the process may start automatically if the factory_update_param.aml file is present. Introduction: Why Your MXQ S805 Still Matters The

Finalize: After the progress bar finishes, the box will reboot. The first boot into Android 5.1.1 can take up to 10 minutes. Known Issues & Alternatives

Bugs: Common issues with this specific 5.1.1 port include shutdown problems, limited Wi-Fi driver support, and splash screen loops.

Alternative (LibreELEC): For users primarily wanting to run an updated version of Kodi (e.g., version 18+), installing LibreELEC or AlexELEC is considered a safer and more stable option than Android 5.1.1.

USB Burning Tool: For a "clean" install or to recover a bricked box, you can use the Amlogic USB Burning Tool on a Windows PC with a USB-A to USB-A cable.

⚠️ IMPORTANT WARNING:
Flashing the wrong firmware can permanently brick your TV box. This guide is based on generic MXQ S805 hardware. Verify your device’s PCB board markings (e.g., “MXQ V3.1”, “S805 V1.2”) before proceeding.