S805 Android 5.1.1 Lollipop Download !!exclusive!! - Mxq Amlogic

Complete Guide: MXQ Amlogic S805 Android 5.1.1 Lollipop Firmware Download & Installation

The MXQ Amlogic S805 is one of the most ubiquitous TV boxes in the budget market. While many units have moved on to newer versions of Android, a large number of these devices still operate on Android 5.1.1 Lollipop. If your device has become sluggish, stuck on the boot logo, or you simply want to restore it to factory settings, finding the correct firmware is essential.

This guide covers the download sources, preparation, and installation process for the MXQ S805 Lollipop firmware.

Step 1: Install USB Burning Tool & Drivers

Run the installer as Administrator. During installation, ensure you check the box for "Install WorldCup Driver." Restart your PC.

Step 1: Install the Tool

1. Download and install the Amlogic USB Burning Tool.
2. During installation, ensure you install the drivers when prompted.

🚨 Important Warnings

• Flashing wrong firmware = permanent brick (unless you have a USB-UART adapter).
• Android 5.1.1 is outdated – no security updates. Use only for offline/legacy projects.
• WiFi may not work after flash unless you restore original wifi_config or replace driver.

Would you like a direct download link checklist for the most common MXQ S805 boards (e.g., V3.1, V5, V6, V2.2)?

It seems you’re looking for a firmware or ROM download for an Mxq Amlogic S805 box running Android 5.1.1 Lollipop. Mxq Amlogic S805 Android 5.1.1 Lollipop Download

I can’t provide a direct download link, but here’s a structured response you could use as a template for a forum post, guide, or internal note:

Title: Mxq Amlogic S805 Android 5.1.1 Lollipop – Firmware Download & Flashing Guide

Content:

If you need to restore or upgrade your MXQ (or generic Mxq clone) with Amlogic S805 to Android 5.1.1 Lollipop, follow these steps: Complete Guide: MXQ Amlogic S805 Android 5

1. Identify your PCB version – Open the box and check the motherboard markings (e.g., MXQ V3.1, V5.1, S805_V2.0). Wrong firmware can brick the device.

2. Find the correct firmware – Search for:

   • "MXQ S805 5.1.1 firmware img"
   • "Amlogic S805 android 5.1.1 stock rom"
   • Common filenames: MXQ_S805_20151105.img, update_MXQ_S805_5.1.1.zip

3. Download from trusted sources – Look at:

   • ChinaGadgetsReviews forum
   • FreakTab (Amlogic S805 section)
   • Amlogic firmware repositories (archive.org search for “MXQ S805”)

4. Flashing methods:

   • USB Burning Tool (for .img files) – requires male-to-male USB cable and shorting NAND pins if bricked.
   • Burn Card Maker (for .zip update packages) – copy to SD card, insert, reboot with reset button pressed.

5. Warning – Many “MXQ” boxes use counterfeit or modified S805 chips. If 5.1.1 fails, try Android 4.4.2 KitKat (more stable for older S805 boards).

Example filename to search:
MXQ_S805_105L1_20151105.img (MD5: 8f3d2a1b... – verify checksum before flashing).

Step 4: Flashing the Firmware

Once the USB Burning Tool detects your device (it will show "HUB2-1: Connect Success"):

1. Click Start.
2. You will see a progress bar: Erase Flash > Download DDR > Download UBOOT > Download System.
3. Wait until the progress reaches 100% and shows Burn Success.
4. Click Stop, then unplug the USB cable.

2. Android PC TV (FreakTab Forum)

The FreakTab community is the gold standard for TV box firmware. Download and install the Amlogic USB Burning Tool

• Direct Link (example): Look for threads titled "[MXQ S805] Android 5.1.1 Lollipop Stock ROM"
• Files: Often provided as OTA zip files or IMG files.