Mt6589 Android Scatter Emmc [work] May 2026
The MT6589 Android scatter eMMC file is the essential "map" for devices powered by the MediaTek MT6589 chipset. It defines how the internal eMMC (Embedded MultiMediaCard) storage is partitioned, allowing tools like the SP Flash Tool to identify exactly where to write system images such as the bootloader, recovery, and system files. Core Function of the MT6589 Scatter File
The MT6589 was one of the first widely popular quad-core processors from MediaTek used in mid-range smartphones. Unlike older devices that used NAND flash, those utilizing the eMMC format require a specific scatter file that accounts for the different memory regions, such as EMMC_BOOT_1 and EMMC_USER.
Partition Mapping: The file lists every partition (e.g., PRELOADER, BOOTIMG, RECOVERY, SYSTEM, USERDATA) along with its hex-coded start address and size.
Safety Instruction: Flashing software uses this file to ensure that a 2GB system image isn't accidentally written into a 10MB recovery partition.
Device Recovery: It is the primary tool for unbricking a device that is stuck in a bootloop or has a corrupted partition table. How to Use the MT6589 Scatter File
Flashing a MT6589 device typically involves the following steps:
[Revised] How to use SP Flash tool to flash Mediatek firmware
devices, the MT6589_Android_scatter_emmc.txt file acts as a map that tells the SP Flash Tool where to write specific parts of the firmware (like ) on the phone's internal storage. CARE Toolkit Essential Requirements for Flashing To use a scatter file effectively, you typically need: MediaTek VCOM Drivers
: Required for your PC to communicate with the phone in "Preloader" mode. SP Flash Tool
: The software used to select the scatter file and perform the "Download" or "Readback". A Matching Scatter File
: While generic files exist, it is safest to use one created specifically for your exact device model to avoid memory address mismatches that can cause boot loops or hard bricks. How to Use the Scatter File Load the File : Open SP Flash Tool and click the Scatter-loading button. Select your MT6589_Android_scatter_emmc.txt Verify Files
: Ensure the relevant partitions (RECOVERY, SYSTEM, etc.) have valid file paths next to them. Choose Mode Download Only : Recommended for simple updates or fixes. Firmware Upgrade : Use if changing the partition layout (risky). Avoid "Format All + Download"
: This can erase your IMEI and NVRAM data, leading to "Invalid IMEI" errors.
, power off your phone (remove the battery if possible), and connect it to the PC. Tools for Research and Customization
If you cannot find a stock ROM, you can use these tools to generate or modify scatter files:
: Excellent for creating a scatter file from a "Readback" dump if you don't have the original firmware. MTK Droid Tools
: A classic (though dated) tool for creating scatter files from a working device.
: A professional hardware/software solution for more advanced memory operations. For specific file downloads, the Hovatek Forum
A scatter file is a text document that tells the SP Flash Tool
how the partitions are laid out on your MediaTek MT6589 device's eMMC storage. 1. Purpose of the Scatter File The scatter file contains the start addresses for every partition (like
). Without it, the flashing tool won't know where to write the firmware images to the eMMC chip. 2. Common Partition Layout (MT6589 eMMC) mt6589 android scatter emmc
Typical address mapping for an MT6589 device usually looks like this: Start Address ANDROID (System) 0x2d180000 0x34f80000 3. How to Create or Obtain a Scatter File
If you don't have the scatter file for your specific firmware, you can generate one using these methods: MTK Droid Tools
: This is the classic method for MT6589 devices. Connect your phone (with USB Debugging on), click "Blocks Map," and then select "Create Scatter File" SP Flash Tool Readback
: Advanced users can perform a "Readback" of the ROM and use tools like
or manual scripts to extract the partition table from the device's (Partition Management Table). Firmware Packages : Most stock ROMs for MT6589 come with a file named MT6589_Android_scatter_emmc.txt included in the zip. 4. How to Use it for Flashing SP Flash Tool "Scatter-loading" Select your MT6589_Android_scatter_emmc.txt
The tool will automatically populate the list of partitions. Ensure the file paths for each image (e.g., recovery.img ) are correct before clicking
Never use a scatter file from a different device model, even if it uses the same MT6589 chip. Incorrect partition addresses can hard-brick your phone's eMMC. Are you looking to repartition
your internal storage for more app space, or are you trying to a specific device? MT6589 Android Scatter Emmc | PDF - Scribd
MT6589 Android Scatter Emmc - Free download as Text File (.txt), PDF File (.pdf) or read online for free. just enjoy. MT6589 Android Scatter Emmc | PDF - Scribd
The MT6589 Android scatter eMMC file is a configuration text file used by the SP Flash Tool to define the memory structure and partition map of MediaTek MT6589-based devices. It provides the tool with critical start addresses and lengths for each partition (such as PRELOADER, RECOVERY, and SYSTEM) on the device's eMMC storage. Typical File Header
A standard scatter file for this chipset begins with basic platform identification:
############################################################################################################## # # General Setting # ############################################################################################################## - platform: MT6589 - project: [Device Specific Project Name] - storage: EMMC - boot_channel: MSDC_0 - block_size: 0x20000 Use code with caution. Copied to clipboard Partition Content Structure
The file lists each partition with its specific attributes. A typical entry for the recovery partition might look like this:
- partition_index: SYS16 partition_name: RECOVERY file_name: recovery.img is_download: true type: NORMAL_ROM linear_start_addr: 0x2d80000 physical_start_addr: 0x2d80000 partition_size: 0x600000 region: EMMC_USER storage: HW_STORAGE_EMMC boundary_check: true is_reserved: false operation_type: UPDATE reserve: 0x00 Use code with caution. Copied to clipboard Key Functions
Partition Mapping: Directs the flasher to the exact physical address on the eMMC chip for each firmware component.
Tool Compatibility: Newer versions of SP Flash Tool may require a specific scatter format; using an incompatible version for the MT6589 can result in "Platform MT6589 not supported" errors.
Safety: Includes boundary checks to prevent overwriting critical memory regions.
For specific firmware backups or flashing, you can often find these files on repositories like Scribd or dedicated Android development forums like Hovatek.
Do you need the full partition list for a specific MT6589 device, or are you trying to fix a specific error in SP Flash Tool?
Where can get MTK scatter file? How to download MTK CPU scatter files? The MT6589 Android scatter eMMC file is the
Here’s a concise technical piece putting together mt6589, Android, scatter, and eMMC:
MT6589 Android Scatter File for eMMC Configuration
The MediaTek MT6589 (a 28nm, quad-core Cortex-A7 SoC from 2013) runs Android (typically 4.1–4.4) with storage managed via eMMC (embedded MultiMediaCard). The bridge between the chip, partition layout, and flashing tools (like SP Flash Tool) is the scatter file – a text-based partition table.
For eMMC-based MT6589 devices, a typical scatter entry looks like this:
- partition_index: 4
partition_name: ANDROID
file_name: system.img
is_download: true
type: YAFFS_IMG
linear_start_addr: 0x2a800000
physical_start_addr: 0x2a800000
partition_size: 0x30000000
region: EMMC_USER
Key points for this combination:
region: EMMC_USERindicates the main user-accessible eMMC area (not boot1/boot2).- Addresses are linear (memory-mapped), not raw block offsets.
- Common partitions include
PRELOADER,UBOOT,BOOTIMG,RECOVERY,SECCFG,ANDROID,CACHE,USRDATA.
The scatter file is essential for correctly flashing or backing up an MT6589 device; mismatched addresses or using an eMMC scatter on an older NAND-based MT6589 (rare) would brick the device.
What is a Scatter File?
A scatter file is a text file that contains information about the layout of the partitions on an Android device's storage. It's used by SP Flash Tool, a popular tool for flashing firmware on Mediatek-based devices, to determine where to write the different components of the firmware.
Why Do You Need a Scatter File?
When flashing a firmware on an MT6589 device with eMMC storage using SP Flash Tool, you need a scatter file to ensure that the different components of the firmware are written to the correct partitions on the device. Without a scatter file, you may end up with a bricked device or a device that doesn't boot.
Creating a Scatter File for MT6589 Devices with eMMC Storage
To create a scatter file for your MT6589 device with eMMC storage, follow these steps:
- Download and Install SP Flash Tool: Download the latest version of SP Flash Tool from the official website and install it on your computer.
- Connect Your Device: Connect your MT6589 device to your computer using a USB cable.
- Identify Your Device's eMMC Chip: Check your device's documentation or search online to identify the eMMC chip used on your device. Common eMMC chips used on MT6589 devices include:
- Samsung KLM8G1GEMT
- Toshiba THGBMBNG6AAK
- Micron MTFC8GAC6MA
- Determine Your Device's Partition Layout: Use a tool like
adb shellor a file manager app to list the partitions on your device. You can also use SP Flash Tool's built-in partition manager to view the partition layout.
Here is a sample partition layout for an MT6589 device with eMMC storage:
/dev/block/mmcblk0p1: 00000000 00010000 "preloader"
/dev/block/mmcblk0p2: 00010000 00020000 "uboot"
/dev/block/mmcblk0p3: 00020000 00100000 "boot"
/dev/block/mmcblk0p4: 00100000 00800000 "system"
/dev/block/mmcblk0p5: 00800000 00200000 "cache"
/dev/block/mmcblk0p6: 00A00000 00200000 "userdata"
- Create the Scatter File: Create a new text file (e.g.,
mt6589_scatter.txt) and add the following lines:
# Configuration File
EMMC_WB ENABLE
# Partiton Table
PARTITION LIST
PRELOADER:0x00000000:0x00010000
UBOOT:0x00010000:0x00020000
BOOT:0x00020000:0x00100000
SYSTEM:0x00100000:0x00800000
CACHE:0x00800000:0x00200000
USERDATA:0x00A00000:0x00200000
Replace the partition offsets and sizes with the ones from your device.
Saving and Using the Scatter File
Save the scatter file and place it in the same directory as your firmware files.
When using SP Flash Tool, select the scatter file and the firmware files, and then follow these steps:
- Launch SP Flash Tool: Launch SP Flash Tool on your computer.
- Select the Scatter File: Click on the "Scatter-Loading" button and select the scatter file you created.
- Select the Firmware Files: Select the firmware files you want to flash.
- Configure the Flash Options: Configure the flash options as desired (e.g., select the COM port, baud rate, and flash mode).
- Start the Flash Process: Click on the "Download" button to start the flash process.
Troubleshooting
If you encounter issues during the flash process, check the following:
- Make sure the scatter file is correct and matches your device's partition layout.
- Verify that the firmware files are correct and compatible with your device.
- Check the device's eMMC chip and adjust the scatter file accordingly.
By following this guide, you should be able to create a scatter file for your MT6589 device with eMMC storage and use it to flash firmware using SP Flash Tool. MT6589 Android Scatter File for eMMC Configuration The
The MT6589 Android Scatter eMMC refers to a specific configuration file used for flashing and managing firmware on devices powered by the MediaTek MT6589 chipset. This chipset, released around 2013, was one of the first quad-core processors for budget smartphones and relies on a "scatter" file to map the device's memory partitions during the flashing process. Core Components & Function
MT6589 Chipset: A 1.2 GHz quad-core Cortex-A7 processor. It was a milestone for MediaTek, bringing multi-core performance to the mass market.
Scatter File (MT6589_Android_scatter_emmc.txt): A text-based map that tells the SP Flash Tool exactly where to write specific files (like system.img or recovery.img) on the internal storage.
eMMC (Embedded MultiMediaCard): The type of internal flash storage used. The "eMMC" in the scatter filename confirms that the map is configured for this specific storage architecture rather than older NAND types. Technical Breakdown of the Scatter File
The scatter file contains several critical parameters for each partition:
Partition Index: The numerical order of the partition (e.g., SYS1, SYS2).
Address Range: Specifically, the linear_start_addr and physical_start_addr, which dictate the exact byte where a partition begins on the eMMC chip.
Block Size: For MT6589 eMMC devices, the block size is typically set to 0x20000 (128 KB).
Flashable Status: A flag (is_download: true/false) that tells the flashing tool whether that particular section should be overwritten during a firmware update. Usage in Device Maintenance
Unbricking: If a device is stuck in a boot loop, a correct MT6589 scatter file is required to re-install the factory firmware.
Custom Recovery: To install tools like TWRP, you use the scatter file to target only the RECOVERY partition while leaving the rest of the system intact.
Partition Resizing: Advanced users often edit the scatter file or associated EBR files to increase the available internal storage space for apps by shrinking other partitions. Critical Precautions
Version Matching: Using a scatter file from a different device—even one with the same MT6589 chip—can lead to a "hard brick" because memory addresses vary between manufacturers.
SP Flash Tool Compatibility: Older chipsets like the MT6589 often require specific legacy versions of the SP Flash Tool to communicate correctly with the device hardware. ROM Flashing Tutorial For MTK Chipset Phones | PDF - Scribd
The MT6589 is a MediaTek (MTK) SoC (System on Chip) released around 2012-2013. It was a very popular quad-core chipset used in devices like the Galaxy S4 Clone, various HTC clones, and budget devices from brands like Micromax, Karbonn, and Gionee.
When dealing with the "Scatter File" and "eMMC" for this chipset, you are likely trying to unbrick a device, repair a boot loop, or downgrade/upgrade the firmware using tools like SP Flash Tool.
Here is a detailed feature breakdown and technical guide regarding the MT6589 Android Scatter eMMC configuration.
Part 4: Step-by-Step – Flashing Stock ROM on MT6589 via eMMC Scatter
6. Validation Tips (For Engineers)
- Check linear address integrity: Each partition’s
linear_start_addrshould equal the previouslinear_start_addr + partition_size(except bootloader areas). - Verify eMMC region type:
EMMC_BOOT_1/EMMC_BOOT_2– for preloader/dsp_blEMMC_USER– for all Android partitions
- Compare with dumped GPT: Run on device:
cat /proc/partitions ls -l /dev/block/platform/mtk-msdc.0/by-name
Troubleshooting tips
- If flash fails at preloader: stop. Wrong preloader often bricks. Research exact preloader needed for your board/revision.
- If partitions overlap after editing scatter: restore original scatter, reflash essential boot partitions.
- If device loses IMEI or network: restore nvram/persist from backup; do not reuse nvram from other devices.
🖥️ CLI / UI Features
- Verbose/debug mode with hex dumps
- Dry-run mode (simulate without writing)
- Progress bar for large partitions
- Scriptable via JSON/YAML configs
- Output in machine-readable formats (JSON, CSV)
Example of an MT6589 scatter file snippet:
- partition_index: SYS0
partition_name: preloader
file_name: preloader_mt6589.bin
is_download: true
type: SV5_BL_BIN
linear_start_addr: 0x0
physical_start_addr: 0x0
partition_size: 0x40000
partition_index: SYS1 partition_name: proinfo file_name: NONE is_download: false type: NORMAL linear_start_addr: 0x80000 partition_size: 0x300000
Notice that each partition has:
- linear_start_addr – Absolute byte offset inside the eMMC user area.
- partition_size – Size in bytes (hexadecimal).
- file_name – The corresponding binary image file.
Critical: Scatter files are chipset-specific and board-specific. An MT6589 scatter file for a Lenovo A820 will not work on a ZTE V987, even though both use MT6589. The partition sizes and preloader base address may differ.
