For users of Mitsubishi Programmable Logic Controllers (PLCs), the Mitsubishi Easysocket USB Driver
is a critical component for establishing communication between a computer and industrial hardware. This driver is essential for programming and monitoring systems like the MELSEC FX, L, and Q series. Understanding the Easysocket USB Driver
The Easysocket driver acts as the bridge that allows Windows operating systems to recognize Mitsubishi hardware connected via USB. It is primarily used with MELSOFT engineering software such as GX Works2 and GX Developer. How to Find the Driver (Windows 7)
If you are looking for a standalone zip file, it is important to note that Mitsubishi Electric typically includes these drivers within their official software packages rather than as separate downloads. Download | MITSUBISHI ELECTRIC Factory Automation
* iQ Works. * iQ AppPortal. * GX Works3. * GX Works2. * MX Component. * MX Sheet. * GX VideoViewer Pro. * GX LogViewer. MITSUBISHI ELECTRIC Global website Communications using the built-in USB port of the - FAQ
The Mitsubishi Easysocket USB driver is typically included within the installation folders of MELSOFT engineering software like GX Works2 or GX Developer. If you are looking for a standalone ZIP file or a link to the driver, you can find it through the following methods: Direct Download Links
You can find compatible drivers for Windows 7 (32-bit and 64-bit) on these third-party driver repository sites:
DriverScape: Offers Easysocket Driver Version 4.0.0.0 (approx. 19.37 KB).
Treexy: Lists Easysocket Version 4.0.0.1 released in February 2017.
Mitsubishi Electric FA Support: Official software updates and manuals can be found on the Mitsubishi Electric Factory Automation Global Website. Local Installation Path
If you already have Mitsubishi software installed, the driver files are already on your computer. You can manually point Windows to these directories to install the driver:
GX Works2: C:\Program Files (x86)\MELSOFT\Easysocket\USBDrivers GX Developer: C:\MELSEC\Easysocket\USBdrivers Manual Installation Steps
Open Device Manager and locate the "Unknown Device" or "MELSEC" entry under USB controllers. Right-click and select Update Driver Software. Choose Browse my computer for driver software.
Navigate to one of the local paths listed above or the folder where you extracted your downloaded ZIP file. Click Install once "Easysocket USB Drivers" is identified. Download | MITSUBISHI ELECTRIC Factory Automation mitsubishi easysocket usb driver windows 7 zip link
The Mitsubishi EasySocket USB Driver is essential for engineers and technicians using Windows 7 to program or monitor Mitsubishi PLCs (Programmable Logic Controllers). Without this driver, your computer cannot recognize hardware connected via a built-in USB port, such as FX3G, L series, or Q series CPUs. Understanding EasySocket USB Drivers
This driver acts as the bridge between your Windows 7 OS and Mitsubishi Electric's MELSOFT suite (including GX Works2 and GX Developer). It allows for remote monitoring, data exchange, and control over a direct USB connection or network-based EasySocket protocol. Where to Find the Driver (Zip & Local Link)
Users often search for a standalone zip link, but the most reliable way to obtain the driver is through your existing MELSOFT installation. Install Mitsubishi Easysocket USB Drivers on Windows 8
Review: Mitsubishi EasySocket USB Driver for Windows 7
Overview
The Mitsubishi EasySocket USB driver for Windows 7 is a software package designed to enable seamless communication between Mitsubishi devices and Windows 7 operating systems. The driver facilitates the connection of Mitsubishi devices to a computer via a USB interface, allowing users to access and manage device functions.
Features and Performance
The Mitsubishi EasySocket USB driver for Windows 7 offers the following features:
Pros
Cons
Conclusion
The Mitsubishi EasySocket USB driver for Windows 7 is a useful software package for users who need to connect Mitsubishi devices to a Windows 7 system via USB. The driver's ease of installation, compatibility, and reliable performance make it a valuable tool for managing Mitsubishi device functions. While there is limited information available on the driver's features and functionality, the driver's performance and user-friendly interface make it a good choice for users who need a reliable USB driver.
Rating: 4/5
Recommendation
If you are a user who needs to connect a Mitsubishi device to a Windows 7 system via USB, the Mitsubishi EasySocket USB driver is a good option to consider. The driver's ease of installation, compatibility, and reliable performance make it a valuable tool for managing device functions.
Link to Download
To download the Mitsubishi EasySocket USB driver for Windows 7, please visit the official Mitsubishi website or a trusted software download site. Be sure to extract the ZIP file and follow the installation instructions to ensure a successful installation.
Additional Information
Before downloading and installing the driver, ensure that your system meets the minimum requirements, including Windows 7 operating system and a compatible Mitsubishi device. Additionally, be sure to follow proper installation and uninstallation procedures to avoid any issues with the driver.
The Mitsubishi Easysocket USB Driver is a critical software component for automation professionals, enabling Windows-based computers to communicate with Mitsubishi Programmable Logic Controllers (PLCs), such as the Q, L, and FX series, via USB or Ethernet protocols. Finding the Driver
The driver is rarely a standalone download on official sites; it is typically bundled with Mitsubishi’s engineering software suites. If you already have GX Works2 or GX Developer installed, the necessary driver files are likely already on your hard drive in a dedicated subfolder.
Common Local Path: C:\Program Files\MELSOFT\EasySocket\USB Drivers
Third-Party Zip Links: While it is safer to use official software, third-party repositories often host ZIP archives of driver version 4.0.0.0 or 4.0.0.1 for older systems. You can find these on sites like DriverScape and Treexy. Windows 7 Compatibility
The Easysocket driver is fully compatible with Windows 7 (both 32-bit and 64-bit). Versions 4.0.0.0 and 4.0.0.1 are specifically noted for their stability on this OS.
The Mitsubishi EasySocket USB Driver is a foundational software component required for your PC to communicate with Mitsubishi PLCs (like the FX, L, and Q series) via a USB connection. On Windows 7, this driver is typically bundled with MELSOFT engineering software rather than provided as a standalone "zip" download from official sources. Where to Find the Driver (File Locations)
If you already have Mitsubishi software installed, you likely already have the driver files on your computer. Common paths in Windows 7 include: Easy Installation : The driver comes in a
Standard Path: C:\Program Files\MELSOFT\EasySocket\USBDrivers
64-bit Systems: C:\Program Files (x86)\MELSOFT\EasySocket\USBDrivers
FX Series Specific: C:\Program Files\Melsoft\EasySocket\FXOptionDrivers\FXUSBDrv How to Install on Windows 7 USB Driver Installation Instructions for Windows 7
While Windows 7 is an aging operating system, it remains a staple in many industrial environments. The Mitsubishi EasySocket USB driver is the bridge that allows modern technicians to communicate with legacy hardware. Always prioritize downloading drivers from official Mitsubishi channels to ensure the stability of your automation systems.
The Mitsubishi EasySocket USB driver is typically not a standalone download but is included within Mitsubishi's programming software packages like GX Developer
. To install it on Windows 7, you generally need to point the Windows Device Manager to the driver folder within your software's installation directory. Download and Official Sources
Official drivers and software updates are available through the Mitsubishi Electric Factory Automation Download Center Software Bundles : The drivers are located in the installation files for GX Developer Registration
: Some official downloads require creating a "My Mitsubishi" account and registering your software ProductID on the Mitsubishi Software Portal Installation Steps for Windows 7
If your PC does not recognize the PLC (Programmable Logic Controller) when connected via USB, follow these manual installation steps: Connect the Device
: Plug the USB cable from the PLC or adapter (e.g., FX-USB-AW) into your computer. Open Device Manager : Right-click My Computer Device Manager Locate Unknown Device : Look for "Unknown Device" or "Mitsubishi PLC" under Other devices Ports (COM & LPT) Update Driver Right-click the device and select Update Driver Software "Browse my computer for driver software" Specify Folder Path
: Browse to the EasySocket driver location. The default installation path for GX Works2 is: C:\Program Files (x86)\MELSOFT\EasySocket\USBDRIVERS (for 64-bit systems) C:\Program Files\MELSOFT\EasySocket\USBDRIVERS (for 32-bit systems) Note: For FX Series specifically, use: ...\EasySocket\FXOptionDrivers\FXUSBDrv Confirm Installation : Windows may show a security warning; select "Install this driver software anyway" to complete the process. Troubleshooting Manually Install Any Driver on Windows Computer
| Error | Solution |
|-------|----------|
| Driver not found in ZIP | Ensure you didn’t download just a documentation ZIP. The real driver contains eusb2k.inf, eusb2k.sys, eusb2k.cat. |
| Code 52 (unsigned driver) | Reboot Windows 7 with Driver Signature Enforcement disabled (F8 on boot → “Disable Driver Signature Enforcement”). |
| USB device not detected at all | Try another USB port (USB 2.0 preferred, not 3.0). Also replace the USB cable (some cheap cables lack data lines). |
| COM port number > 10 | GX Developer often only sees COM1-10. Go to Device Manager → Port Settings → Advanced → Change COM port number to COM3 or COM5. |
| ZIP is corrupted | Re-download from Mitsubishi official source. Use 7-Zip (not Windows built-in) to extract. |
Critical Warning: Avoid third-party “driver download” websites offering EXE files or zip archives without verification. Many contain malware. Only use trusted sources. consider air-gapping the industrial PC.
Safety Warning: Avoid third-party “driver download” sites. Many bundle malware or outdated unsigned drivers. Always prefer Mitsubishi’s official channels.
.sys or .inf file → Properties → Digital Signatures. Should show “Mitsubishi Electric Corporation”.