Skip to main content

Maxio 1602 Full ~repack~ May 2026

The Maxio MAP1602 (specifically the MAP1602A "Falcon Lite") is a high-performance, DRAM-less NVMe controller that has become a staple for PCIe Gen4 x4 SSDs. It is widely recognized for its ability to saturate the Gen4 interface without the cost of a dedicated DRAM cache. Technical Specifications

The MAP1602 is engineered to balance cost and peak Gen4 performance: Interface: PCIe Gen4 x4, NVMe 2.0 protocol.

Architecture: 4-channel, DRAM-less design utilizing Host Memory Buffer (HMB) technology (typically 32MB to 40MB) to maintain performance.

Manufacturing Node: Produced on TSMC’s 12nm process, contributing to its high power efficiency and low thermal output.

NAND Support: Optimized for ONFi 5.0 and Toggle 5.0 interfaces, supporting speeds up to 2400 MT/s. Capacity Support: Scalable up to 4TB. Performance Metrics maxio 1602 full

When paired with high-speed NAND (such as YMTC’s 232-layer TLC), the controller delivers top-tier sequential speeds: Sequential Read: Up to 7,400 MB/s. Sequential Write: Up to 6,500 MB/s. Random Read/Write: Up to 1,000K IOPS.

Efficiency: Often cited as one of the coolest-running Gen4 controllers, making it ideal for laptops and the PlayStation 5. Common Implementations

You will find the MAP1602 in various popular "bang-for-buck" SSDs:

Быстрый SSD на Maxio MAP1602: обзор Mastero Astrum 1 TБ The Maxio MAP1602 (specifically the MAP1602A "Falcon Lite")

5. Application Circuit (Summary)

A typical application uses:

  • External capacitor from SET to GND for reset timeout.
  • External capacitor from WDS to GND for watchdog timeout.
  • Resistor divider on IN1/IN2 to monitor non-standard voltages (e.g., 5V, 12V).
  • Pull-up resistor on RESET (if open-drain output selected).

Step 3: Smart Scan (The Easy Way)

If you have the Maxio software connected, look for a button labeled "Smart Scan" or "Smart Config."

  1. Click the button.
  2. The screen will begin a test sequence.
  3. Watch the screen and click the patterns that look correct (usually looking for the "All Red," "All Green," and "All Blue" separation).
  4. Once complete, the software automatically calculates the correct driver chip settings for your 1602 module.
  5. Save to Hardware.

Part 1: What is the Maxio 1602 Full?

The Maxio MAS1102 (commonly referred to as the 1602 series) is a 4-channel NVMe 1.4 SSD controller fabricated on a mature yet efficient TSMC 28nm process node. The keyword "Full" in "Maxio 1602 Full" typically refers to the fully unlocked or fully featured retail version of the firmware and hardware configuration.

Unlike "lite" or OEM-locked versions, the "Full" variant supports: External capacitor from SET to GND for reset timeout

  • Full TCG Opal 2.0 encryption (hardware-based security).
  • Full power management states (APST, ASPM, L1.2) for laptop battery efficiency.
  • Full compatibility with a wider range of 3D TLC and QLC NAND from YMTC, Kioxia, and Micron.

Essentially, "Maxio 1602 Full" signifies a controller that is not artificially limited by firmware, delivering the maximum theoretical performance of up to 3,600 MB/s sequential read and 3,200 MB/s sequential write.

4. Timing Specifications (Typical)

| Parameter | Min | Typ | Max | Unit | |--------------------------|---------|---------|---------|--------| | Reset threshold accuracy | -1 | – | +1 | % | | Reset timeout (C=0.1µF) | 100 | 140 | 200 | ms | | Watchdog timeout (C=0.1µF)| 1.4 | 1.6 | 1.8 | s | | MR minimum pulse width | 1 | – | – | µs | | VCC to RESET delay | – | 30 | 60 | µs |

Step 1: Download the Correct Software

Before connecting your hardware, you need the right control software. Maxio cards generally work with specialized configuration software, but many are compatible with the more universal LEDStudio or HD Player suites depending on your sending card (Novastar, Linsn, or Colorlight).

  • Recommendation: Search for the "Maxio LED Setting Software" compatible with your specific card model (e.g., MC708).
  • Alternative: If you are using a sending card from another brand (like Novastar), you can often use the receiving card configuration features within the Novastar software to identify the Maxio card.