Skip To Main Content

Lukhan Lk-t20 | Driver Windows 10 Fixed

To download the driver for your Lukhan (Sewoo) LK-T20 printer on Windows 10, use the official resources from the manufacturer, SEWOO. The

typically uses the LK-T Series Windows Driver, which supports multiple versions of Windows including Windows 10 (32-bit and 64-bit). Driver Download & Installation

Official Download Center: Visit the SEWOO Download Center or the Perkon Lukhan Support Page to find the "LK-T Series Windows Driver". Select Driver Version: 180 DPI: Most standard units use the Thermal Receipt Printer Driver Ver 4.58 (compatible with T32/T11/T20/T21 models).

203 DPI: If you have the high-resolution variant, look for the Thermal 203dpi 3inch Driver Ver 4.70 . Installation Steps: Download and unzip the file. Run the installer and follow the on-screen prompts.

When prompted for the interface, select the port your printer is connected to (usually USB or Virtual COM). Configuration Utilities

If you need to adjust printer settings or upload logos, you can also download these tools from the same SEWOO Support Site:

MemorySaver: For configuring hardware settings like baud rate or density. NV Logo Upload: To add your business logo to receipts.

Note: For older systems, this printer also supports OPOS drivers for specialized POS software. Driver & SDK - SEWOO

Lukhan LK-T20 (often rebranded or categorized under ) is a high-performance 3-inch thermal POS printer. Drivers for Windows 10 are available through the manufacturer's official support channels and authorized distributors. Driver Download & Compatibility

To ensure your printer works correctly with Windows 10 (32-bit or 64-bit), you should download the official thermal receipt printer driver. Official Download: The latest drivers are hosted on the SEWOO (MiniPrinter) official site Driver Version: Look for the "Windows Driver (203dpi) Thermal 3inch" (v4.70 or higher) or the "Thermal Receipt Printer Driver (T32/T11/T20/T21)" (v4.58 or higher). OS Support:

These drivers fully support Windows 10, as well as Windows 7, 8, 8.1, and various Server editions. Key Specifications for Configuration

When setting up the driver, you may need these technical details to ensure the output matches your paper size: Print Resolution:

180 DPI or 203 DPI (depending on your specific T20 variant). Paper Width: 80mm (Standard 3-inch thermal rolls). Print Speed: Up to 160mm/sec. Interfaces: Typically supports USB, Serial (RS-232), or Ethernet. Installation Steps for Windows 10 installation file from the SEWOO Support Page Run Installer: Double-click the file and follow the on-screen prompts. Select Model: During installation, choose or the corresponding model from the list. Assign Port:

Select the interface you are using (e.g., USB001 for USB, or the specific COM port for Serial).

Click install and restart your PC if prompted to finalize the setup. Troubleshooting & Tools SLK-T20EB II 3-inch Direct Thermal POS Printer - SEWOO

Installing and Troubleshooting the Lukhan LK-T20 Driver on Windows 10

The Lukhan LK-T20 is a popular printer model known for its high-quality prints and efficient performance. However, like any other printer, it requires a driver to function properly on a computer. In this article, we will guide you through the process of installing and troubleshooting the Lukhan LK-T20 driver on Windows 10.

What is a Printer Driver?

A printer driver is a software component that allows a computer to communicate with a printer. It translates the print commands from the computer into a language that the printer can understand, enabling the printer to produce high-quality prints. Without a printer driver, a computer cannot connect to a printer, and printing is not possible.

Downloading the Lukhan LK-T20 Driver

To install the Lukhan LK-T20 driver on Windows 10, you need to download the driver software from the manufacturer's website or a reliable source. Here are the steps to download the driver:

  1. Visit the Lukhan website or a reliable driver download website.
  2. Search for the Lukhan LK-T20 driver and select the correct operating system (Windows 10).
  3. Click on the download link to download the driver software.
  4. Save the driver software to a location on your computer, such as the Downloads folder.

Installing the Lukhan LK-T20 Driver

Once you have downloaded the Lukhan LK-T20 driver, you can install it on your Windows 10 computer. Here are the steps to install the driver:

  1. Go to the location where you saved the driver software and double-click on the file to run it.
  2. Follow the on-screen instructions to begin the installation process.
  3. Select the language and click Next.
  4. Accept the license agreement and click Next.
  5. Choose the installation location and click Next.
  6. Click Install to begin the installation process.
  7. Wait for the installation to complete, and then click Finish.

Configuring the Lukhan LK-T20 Driver

After installing the Lukhan LK-T20 driver, you need to configure it to work with your printer. Here are the steps to configure the driver:

  1. Go to the Start menu and click on Devices and Printers.
  2. Right-click on the Lukhan LK-T20 printer and select Printing preferences.
  3. In the Printing preferences window, click on the Advanced tab.
  4. Select the paper size, orientation, and other print settings as needed.
  5. Click OK to save the changes.

Troubleshooting Common Issues

If you encounter any issues while installing or using the Lukhan LK-T20 driver, here are some troubleshooting steps to help you resolve the problem:

  1. Driver not installing: Ensure that you have downloaded the correct driver software for your operating system. Try running the installation process again.
  2. Printer not recognized: Check that the printer is properly connected to the computer and turned on. Try restarting the computer and printer.
  3. Print quality issues: Check the paper quality and ensure that it is compatible with the printer. Try adjusting the print settings or cleaning the printer heads.

Updating the Lukhan LK-T20 Driver

To ensure that your Lukhan LK-T20 printer works optimally, it's essential to keep the driver up-to-date. Here are the steps to update the driver:

  1. Visit the Lukhan website or a reliable driver download website.
  2. Search for the Lukhan LK-T20 driver and select the correct operating system (Windows 10).
  3. Check if there is an updated driver version available.
  4. Download the updated driver software and install it on your computer.

Conclusion

In conclusion, installing and troubleshooting the Lukhan LK-T20 driver on Windows 10 is a straightforward process. By following the steps outlined in this article, you can easily download, install, and configure the driver to work with your printer. If you encounter any issues, the troubleshooting steps provided can help you resolve the problem. Regularly updating the driver ensures that your printer works optimally and efficiently.

Frequently Asked Questions (FAQs)

Q: Where can I download the Lukhan LK-T20 driver for Windows 10? A: You can download the Lukhan LK-T20 driver from the manufacturer's website or a reliable driver download website.

Q: How do I install the Lukhan LK-T20 driver on Windows 10? A: Follow the steps outlined in this article to install the driver.

Q: Why is my Lukhan LK-T20 printer not recognized by Windows 10? A: Check that the printer is properly connected to the computer and turned on. Try restarting the computer and printer.

Q: How do I update the Lukhan LK-T20 driver on Windows 10? A: Visit the Lukhan website or a reliable driver download website to check for updated driver versions. Download and install the updated driver software.

Getting your Lukhan (Sewoo) LK-T20 thermal printer running on Windows 10 is straightforward once you have the right files. Since Lukhan is a brand under SEWOO, you'll often find the most up-to-date software under the model name. 🛠️ How to Install Lukhan LK-T20 Drivers on Windows 10 1. Download the Correct Driver

Visit the official SEWOO Download Center to find the latest software. Depending on your specific hardware version, you will likely need one of these two options:

Windows Driver (203dpi): Version 4.70 or higher is typically recommended for modern setups. lukhan lk-t20 driver windows 10

Windows Driver (180dpi): Use this if your specific unit is the 180dpi variant. 2. Run the Installation

Unplug the USB: Keep the printer disconnected from your PC until the installer asks for it.

Open the Setup: Right-click the downloaded .exe file and select Run as Administrator.

Select Interface: During setup, choose your connection type (usually USB or TCP/IP for Ethernet models).

Complete Setup: Follow the on-screen prompts. Once finished, plug in the printer, and Windows should recognize it immediately. 3. Configure Printing Preferences

After installation, you may need to adjust the paper width to match your rolls (usually 80mm). Go to Settings > Devices > Printers & Scanners.

Select your printer and click Manage > Printing Preferences.

Ensure the paper size and "Paper Cut" settings match your needs. 💡 Quick Specs for the Speed: Up to 220mm/sec for fast receipt printing. Resolution: Standard 180 DPI or optional 203 DPI. Paper Width: Supports 50mm to 82.5mm rolls. Reliability: Includes a high-durability auto-cutter. 🔧 Common Troubleshooting

Unspecified Device: If the printer shows up as "Unspecified," right-click it in the Control Panel, remove it, and reinstall the driver using Compatibility Mode for Windows 7 or 8 if the direct install fails.

Connectivity: If using a Serial-to-USB adapter, you may need the VirtualCOM Driver to bridge the connection. Still having trouble?I can help you look into: Finding a specific older driver version Setting up Ethernet/Network printing

Integrating the printer with POS software (like Square or Shopify) Let me know which connection type you are using! SLK-T20EB II 3-inch Direct Thermal POS Printer - SEWOO

The proper paper for the Lukhan (Sewoo) LK-T20 receipt printer is standard 80mm thermal receipt paper

. While the printer can be adjusted to fit rolls as narrow as 50mm, the standard "3-inch" width is the most common for this model. Paper Specifications Specification Paper Type Direct Thermal Receipt Paper (Adjustable from 50mm to 82.5mm) Roll Diameter 80mm - 83mm (3.15" - 3.27") 0.05mm to 0.09mm Core Diameter 12.5mm ± 0.5mm Driver for Windows 10 The Lukhan LK-T20 is manufactured by

. To find the official Windows 10 driver, you should look for the Sewoo LK-T Series Windows Driver Official Source: Sewoo Software Download page Driver Selection: Choose the Windows Driver (203dpi or 180dpi)

depending on your specific hardware version (standard is usually 180dpi). Compatibility:

4. The "Interesting" Failure Mode

Unlike most devices, the LK-T20 has a strange behavior: It can show up as "Unknown USB device (Device Descriptor Request Failed)" if the wrong driver is installed. Fixing it requires deleting hidden drivers in Device Manager — something novice users never find.

3.4. Final Connection

  1. Plug the LK-T20 into a USB 2.0 port (USB 3.0 ports work but are not required).
  2. Wait 10 seconds. The external monitor should light up (extended or mirrored mode by default).
  3. Right-click desktop → Display settings → Identify to adjust.

6. Limitations on Windows 10

Final Verdict

The Lukhan LK-T20 is a solid budget adapter, but Windows 10 does not always include its driver out-of-the-box. Your best bet is to identify the underlying Realtek chipset and install the corresponding official driver. Once set up correctly, the LK-T20 delivers stable performance for everyday browsing, streaming, or Bluetooth peripherals.

Still stuck? Check the included mini CD (if any) or contact Lukhan support via the seller — many provide direct download links upon request.

Last updated: 2026

The Lukhan (Sewoo) LK-T20 is a reliable direct thermal receipt printer known for its high-speed performance and versatile connectivity. When setting up the Windows 10 driver, users typically experience a straightforward installation process that ensures seamless integration with most Point-of-Sale (POS) systems. Driver Installation and Performance

Compatibility: The Windows driver is fully compatible with Windows 10 (32/64-bit), as well as older versions like Windows 7 and 8. It utilizes the standard LK-T Series Windows Driver provided by Lukhan (Sewoo).

Setup Process: Installation is generally plug-and-play via USB. For serial or Ethernet configurations, the driver includes utility tools to manage port settings.

Print Quality: Once the driver is installed, the printer maintains sharp, clear 180 or 203 DPI resolution, suitable for detailed receipts and barcodes.

Customization: Through the Windows printer preferences, you can easily adjust paper widths (typically 80mm), set automatic cutter behaviors, and manage "MemorySaver" features for optimized data handling. Key Features

High Speed: Capable of printing at speeds up to 200mm/sec (or 250mm/sec for the EB II model), making it efficient for high-traffic retail environments.

Connectivity: Often features a "Triple Interface" (USB, Serial, and Ethernet) built-in, which is easily managed through the unified driver suite.

Durability: The printer is designed for longevity with a reliable auto-cutter rated for millions of cuts. Verdict

The Lukhan LK-T20 is a "set-and-forget" hardware solution. Its Windows 10 driver is stable and requires minimal troubleshooting, provided you download the latest version from the official Sewoo/Lukhan support site. SLK-T20EB II 3-inch Direct Thermal POS Printer - SEWOO

The Lukhan LK-T20 (often branded under Sewoo) is a reliable 3-inch thermal POS printer designed for high-volume receipt printing. For users running Windows 10, maintaining updated drivers is essential for ensuring fast print speeds and stable connectivity across various interfaces like USB, Ethernet, or Serial. Driver Availability for Windows 10

is fully compatible with Windows 10 (both 32-bit and 64-bit versions). Official software is typically hosted by SEWOO (Miniprinter), the manufacturer behind the Lukhan brand.

Current Windows Driver: Version 4.70 (supporting Windows XP through Windows 10/11) is the standard for 203dpi models.

Alternative Drivers: For specific system requirements, you can also find OPOS Drivers (v2.99.9.4) and JavaPOS Drivers (v1.90) on the SEWOO Download Center. Key Specifications

is built for performance in retail and hospitality environments:

Print Speed: Up to 220mm/sec, allowing for rapid transaction processing. Resolution: Standard 180 DPI or optional 203 DPI.

Paper Width: Adjustable between 50mm and 82.5mm to fit different receipt sizes.

Connectivity: Supports multiple interfaces, typically featuring a USB port alongside Serial, Ethernet, or Bluetooth options. Installation Guide for Windows 10 To set up your on a modern Windows system, follow these standard steps: SLK-T20EB II 3-inch Direct Thermal POS Printer - SEWOO

The Lukhan LK-T20 (often listed as Sewoo SLK-T20) is a professional 3-inch thermal receipt printer. Official drivers for Windows 10 are available from the manufacturer, SEWOO, and compatible third-party distributors like Perkon. Driver Download & Compatibility

Official software is categorized by the printer's resolution (DPI). You should verify your specific model's DPI (usually found on a label at the bottom of the device) before installing. Official SEWOO Driver Page: Available at miniprinter.com. To download the driver for your Lukhan (Sewoo)

Windows Driver (203dpi): Version 4.70. Supports Windows 10 (both 32-bit and 64-bit), as well as Windows XP and Server 2003+.

Windows Driver (180dpi): Version 4.58. This "THERMAL Receipt Printer Driver" specifically lists support for the T20 model alongside the T32, T11, and T21.

Alternative Source: Perkon provides a generic "LK-T Series Windows Driver" for direct download. Technical Specifications Printing Method Direct Thermal Print Speed Max 220mm/sec (Linerless: 160mm/sec) Resolution 180 DPI or 203 DPI (Optional) Paper Width Supports 50mm to 82.5mm Max Roll Diameter Installation Instructions for Windows 10

If the printer is not automatically recognized, follow these standard POS printer setup steps: Connect the printer via USB and power it on. Open "Devices and Printers" in the Windows Control Panel.

Click "Add a printer" and select "The printer that I want isn't listed" if it doesn't appear.

Choose "Add a local printer or network printer with manual settings."

Select the Port: Most often, this will be a virtual USB port (e.g., USB001).

Install Driver: Click "Have Disk" and browse to the location where you extracted the downloaded Sewoo/Lukhan driver files. Available Utilities & SDKs

OPOS Driver: Version 2.99.9.4 for retail point-of-sale integration.

VirtualCOM Driver: Version 2.20 for mapping USB connections to a COM port.

MemorySaver Utility: Version 3.09 for managing printer settings and internal memory.

Logo Upload Tool: "NVLogoSetup" version 4.20 for adding custom branding to receipts. SLK-T20EB II 3-inch Direct Thermal POS Printer - SEWOO

Lukhan LK-T20 (also recognized as the Sewoo SLK-T20EB II ) is a 3-inch thermal receipt printer produced by SEWOO TECH. To install it on Windows 10, you should use the official THERMAL Receipt Printer Driver (Ver 4.58 or later) or the Windows Driver (203dpi) Ver 4.70, which are compatible with both 32-bit and 64-bit systems. Download and Installation Guide Locate the Driver: Visit the official SEWOO download center for the SLK-T20EB II

Alternatively, use the LK-T Series Windows Driver from authorized regional distributors. Run the Installer:

Disconnect the printer's USB cable before starting the setup.

Run the downloaded .exe file (e.g., THERMAL Receipt Printer Driver Ver 4.58).

During installation, if prompted for a port, leave it on LPT1 (you will switch to USB after the driver is installed). Configure the USB Port: Connect the printer to your PC and turn it on. Open Control Panel > Devices and Printers.

Right-click your printer (often listed as "POS PRINTER" or "LUKHAN PRINTER") and select Printer Properties.

Go to the Ports tab and select the highest available USB### port. Verification:

Click Print Test Page on the General tab to confirm the connection. Essential Support Tools

VirtualCOM Driver: Required if you need to simulate a Serial COM port over a USB connection.

Configuration Utility: Use the SLK-TS100 Utility to adjust hardware settings like paper size, cut mode, or baud rate.

Logo Upload Tool: Use the NVLogoSetup to save store logos directly to the printer's memory for receipt headers. Technical Specifications Resolution: 180 DPI (Standard) or 203 DPI (Optional). Print Speed: Up to 220mm/sec. Paper Width: Supports 50mm to 82.5mm thermal receipt paper.

Title: The Elusive Driver: A Proper Look at the Lukhan LK-T20 on Windows 10

If you have recently acquired a Lukhan LK-T20—likely a thermal printer or a specialized POS (Point of Sale) device—and plugged it into your Windows 10 machine only to be greeted by the "Unknown Device" notification, you are not alone.

The Lukhan LK-T20 falls into a specific category of consumer electronics often referred to as "white-label" hardware. These devices are manufactured in massive quantities by OEM factories in China and rebranded by various smaller distributors. Consequently, official support pages with shiny "Download Driver" buttons are rare to non-existent.

Here is a proper look at how to solve the driver issue for the LK-T20 on Windows 10, avoiding the malware traps and getting the device functional.

Solution 3: The ESC/POS Angle

Most LK-T20 units are designed to use the ESC/POS command set. This is the universal language of thermal receipt printers.

If you are trying to use this printer with a specific piece of software (like a POS system like Loyverse, iZettle, or Odoo), you generally do not install a driver at all. Instead, you should look for the printer's documentation on how to put it into "Android Mode" or "USB Virtual COM Mode."

  1. Hold the feed button while powering on to print the self-test page. This page tells you the current mode.
  2. If the printer is not acting as a generic text printer, the self-test page usually instructs you on how to toggle modes (e.g., "Hold Feed button for 5 seconds").
  3. Once in the correct mode, the generic Windows drivers mentioned in Solution 1 will communicate perfectly with the hardware.

Adjust the Adapter’s Roaming Aggressiveness

  1. Right-click the network icon in the system tray > Open Network & Internet settings.
  2. Go to Change adapter options.
  3. Right-click the Lukhan LK-T20 Wi-Fi adapter > Properties.
  4. Click Configure > Advanced tab.
  5. Find "Roaming Aggressiveness" and set it to Lowest. This prevents unnecessary disconnections.
  6. Find "Transmit Power" and set it to 100% or Highest.

Final Interesting Note

The LK-T20 is a perfect example of the "generic hardware economy" — the manufacturer adds no value in software support. Windows 10 supports it despite Lukhan, not because of them. The most interesting thing about the LK-T20 driver is that it doesn't belong to Lukhan at all.

Complete Guide to Installing Lukhan LK-T20 Drivers for Windows 10 The Lukhan LK-T20 (often branded under the SEWOO label as the SLK-T20EB II

) is a high-performance 3-inch thermal POS printer designed for retail and hospitality environments. Ensuring you have the correct Lukhan LK-T20 driver for Windows 10 is essential for high-speed, reliable printing. 1. Identify Your Specific Model Requirements

Before downloading, check the resolution of your hardware, as different drivers may be required: 180 DPI Model: Common for standard receipt printing.

203 DPI Model: Used for higher-density text or specific graphic requirements. 2. Where to Download the Drivers

Official drivers should be sourced from the manufacturer or verified partner portals to ensure compatibility and security:

SEWOO Official Support: The primary source for the latest software. You can find the THERMAL Receipt Printer Driver Ver 4.58 (compatible with T20) or the Windows Driver Ver 4.70 for 203dpi models on the SEWOO Download Page.

Perkon Partner Portal: Provides a consolidated list of LK-T Series Windows Drivers for quick access via Perkon's Barcode and Receipt Printers. 3. Step-by-Step Installation for Windows 10

To install the driver correctly and avoid common port errors, follow these steps: Visit the Lukhan website or a reliable driver

Preparation: Unplug the printer's USB cable from your PC before starting the installer.

Run the Installer: Double-click the downloaded .exe file (e.g., THERMAL PRINTER Ver 4.58).

Port Selection: During installation, the software may ask for a port. If you are using USB but the printer is not yet connected, select a placeholder like LPT1 to allow the driver files to copy successfully.

Hardware Connection: Once the installation finishes, plug the USB cable into your Windows 10 machine and turn the printer on. Configure the USB Port:

Open Control Panel > Hardware and Sound > Devices and Printers. Locate the "POS PRINTER" or "LUKHAN PRINTER."

Right-click it, select Printer Properties, and go to the Ports tab.

Check the box for the highest numbered USB Virtual Port (e.g., USB001 or USB002) and click Apply.

Test Print: From the General tab, click Print Test Page to confirm the setup is complete. 4. Technical Specifications

Knowing your device's limits helps in configuring the driver's advanced settings: Print Speed: Up to 220mm/sec. Paper Width: Adjustable between 50mm and 82.5mm. Interface: Built-in USB (B-type) and Serial (RS-232C). 5. Troubleshooting Common Issues

Printer Not Found: If Windows lists the device as "Unspecified," ensure you have manually assigned the correct USB port in the printer properties as described in step 3.

Compatibility Mode: If an older driver version is used, right-click the installer, select Properties, and run the Compatibility Troubleshooter for Windows 7/8 settings. SDK Needs: For developers integrating the

into custom POS software, the Windows SDK (sewoo_windowssdk_ep_lktxx) is available on the official SEWOO website.

For further assistance, you can refer to the Microsoft Support Guide for general printer installation tips on Windows 10. SLK-T20EB II 3-inch Direct Thermal POS Printer - SEWOO

For businesses relying on the Lukhan (Sewoo) LK-T20 thermal receipt printer, maintaining the correct drivers is essential for peak performance on Windows 10. This guide provides everything you need to download, install, and troubleshoot the Lukhan LK-T20 driver to ensure your POS system runs smoothly. Where to Download Lukhan LK-T20 Drivers Lukhan LK-T20

is manufactured by Sewoo (formerly Lukhan/Sewoo Tech). To ensure you have the most secure and up-to-date software, you should download drivers directly from the official Sewoo Support Portal. Available Windows 10 Driver Versions:

Windows Driver (203dpi): Version 4.70 (Supports XP through Windows 10/11, 32-bit & 64-bit).

Windows Driver (180dpi): Version 4.58 (Compatible with T32/T11/T20/T21 models).

Alternative Drivers: For specialized systems, you can also find OPOS and JavaPOS drivers on the same page. Lukhan LK-T20 Key Specifications

Before installation, verify your printer's hardware settings, as the driver version often depends on the print resolution: Printing Method: Direct Thermal. Resolution: Standard 180 DPI or Optional 203 DPI. Print Speed: Up to 220mm/sec. Interfaces: USB, Serial (RS-232C), and Ethernet. Paper Width: Adjustable between 50mm and 82.5mm. How to Install the Driver on Windows 10 Follow these steps for a clean installation: SLK-T20EB II 3-inch Direct Thermal POS Printer - SEWOO

The Lukhan (Sewoo) LK-T20 is a 3-inch direct thermal POS (point-of-sale) printer designed for retail and hospitality environments. While Lukhan products are often rebranded or listed under the parent company name, SEWOO, the drivers for the LK-T20 series are fully compatible with Windows 10 (both 32-bit and 64-bit versions). Driver Specifications & Compatibility

The following drivers and software are available for the LK-T20 series to ensure optimal performance on modern Windows systems:

Standard Windows Driver (180dpi/203dpi): The current "THERMAL Receipt Printer Driver" (Ver 4.58 or newer) supports the T32, T11, T20, and T21 series.

Operating Systems: Confirmed support for Windows XP through Windows 10, including Server 2003 and later editions.

Alternative Drivers: For specialized POS software, SEWOO provides OPOS Drivers (Ver 2.99.9.4) and JavaPOS Drivers. Official Download Sources

To ensure system security, download drivers directly from the manufacturer or authorized distributors:

Manufacturer Support: The SEWOO (MiniPrinter) Support Portal hosts the latest Windows drivers, manuals, and SDKs.

Regional Distributors: Sites like Perkon offer direct links for "LK-T Series Windows Drivers". Installation Guide for Windows 10

To install the LK-T20 driver on a Windows 10 machine, follow these steps:

Preparation: Ensure the printer is powered on and connected via USB or Serial.

Run Installer: Double-click the downloaded installation file (e.g., SEWOO_THERMAL_Driver_Setup).

Model Selection: In the setup wizard, select LK-T20 (or SLK-T20) from the list of supported models. Port Configuration:

For USB: Select the virtual USB port assigned to the printer.

For Serial (RS-232): Assign the correct COM port (commonly COM1 or COM2).

Finalize: Complete the wizard and print a test page from "Devices and Printers" in the Windows Control Panel to verify the connection. Technical Highlights

Print Speed: Up to 220mm/sec (depending on specific sub-model like SLK-T20EB II).

Resolution: Standard 180 DPI, with 203 DPI options available.

Interface: Built-in USB (B-type) and Serial (RS-232C 25-pin) standard. SLK-T20EB II 3-inch Direct Thermal POS Printer - SEWOO