To find and install the appropriate driver, follow these steps. The instructions might slightly vary depending on your operating system (Windows, macOS, Linux).
Before diving into drivers, let’s clarify the hardware. The LD-C101 is a USB interface cable designed primarily for Icom transceivers that use the CI-V (Communication Interface-V) protocol. IC-706, IC-7000, IC-718, IC-7300, and many other Icom models rely on this standard.
The adapter converts USB signals from your PC into TTL-level serial signals required by the CI-V bus. Inside the plastic case of the LD-C101, there is typically a bridge chip—most commonly from Silicon Labs (CP210x family) or Prolific (PL2303 family).
Why the driver matters: Your operating system (Windows, macOS, Linux) does not inherently understand how to talk to this chip. The driver acts as a translator, creating a virtual COM port (VCP) that software like HRD, DXLab, or WSJT-X can use.
The LD-C101 USB to CI-V driver is the invisible bridge between your computer and your Icom transceiver. While the hardware costs less than $20, without the correct driver, it is a useless piece of plastic and wire.
To summarize:
If you experience persistent issues, spend an extra $10 on a known-good CP2102-based LD-C101 from a reputable ham radio dealer. The time saved in driver debugging is worth the investment.
Now that you have mastered the driver, go ahead and enjoy seamless computer control of your station. Good luck and 73!
Related Resources:
Keywords: LD-C101 USB to CI-V driver, LD-C101 driver download, CP210x CI-V driver, Icom USB CAT driver, LD-C101 Windows 11, CI-V virtual COM port, amateur radio USB interface driver.
This article was last updated in 2025 for compatibility with Windows 11 version 23H2 and modern Icom radios.
The LD-C101 USB to CI-V cable is a specialized interface used by amateur radio enthusiasts to connect Icom transceivers to a computer for Computer-Aided Transceiver (CAT) control. This single-cable solution replaces the traditional, multi-component Icom CT-17 level converter setup, allowing you to manage frequency, mode, and filter settings directly through software like Ham Radio Deluxe or WSJT-X. Understanding the LD-C101 Interface
The LD-C101 acts as a bridge between your PC's USB port and the 3.5mm CI-V remote jack on your radio. CI-V Cable - IC706 - Groups.io
The LD-C101 USB to CI-V driver is a software component that enables communication between a computer and certain devices, such as amateur radio transceivers, that use the CI-V (Controller Interface V) protocol. This protocol is commonly used in amateur radio equipment to allow for remote control and data transfer.
The LD-C101 is a specific USB interface cable designed for this purpose, and its driver software allows the computer to recognize and interact with the device.
Here are some key points about the LD-C101 USB to CI-V driver:
If you're looking for more information or need to download the driver, I recommend checking the manufacturer's website or searching for the specific driver version compatible with your operating system.
In the fluorescent-lit haze of the third sub-basement of Kuroda Electronics, Kenji Saito sat surrounded by the digital carcasses of two decades of radio technology. His employer, a now-defunct ham radio equipment manufacturer, had left him one final project: support legacy products no one remembered.
His current nemesis? The Ld-c101 USB-to-CI-V driver.
The CI-V protocol was Icom's arcane standard from the 1980s—a single-wire, asynchronous, half-duplex serial system that behaved like a sulky teenager. It worked when it wanted, dropped data when it felt ignored, and required precise timing down to the millisecond. The Ld-c101 was Kuroda’s budget attempt to let modern laptops talk to ancient Icom transceivers via USB. And it had never worked reliably.
Kenji's task: reverse-engineer the firmware, fix the driver, and produce a final update within two weeks. No source code remained. The original engineer, a woman named Hana Yoshida, had left under mysterious circumstances in 2005. Her only legacy was a cryptic comment buried in a long-dead forum: “The CI-V bus is like a queue at a rural post office. Everyone waits their turn, but some customers forget they already spoke.”
Kenji took a sip of vending-machine coffee, bitter as regret. He hooked the Ld-c101 to his logic analyzer. The USB endpoint descriptors checked out—vendor ID 0x1A86, a generic Chinese USB-to-serial chip. But the real logic was in the onboard PIC microcontroller, which translated USB bulk transfers to CI-V’s weird electrical levels.
He captured traffic between the Ld-c101 and an Icom IC-735. Every few commands, the radio would go deaf. Kenji zoomed in on the waveforms. There—a timing violation. The USB host sent a command, the Ld-c101 forwarded it to the CI-V bus, but the radio’s response came back while the Ld-c101 was still finishing its own transmission. In half-duplex land, that was chaos. The microcontroller wasn’t switching from transmit to receive mode fast enough. A classic race condition.
But fixing the PIC firmware required the original development environment. Kenji spent two days scouring old hard drives from Kuroda’s storage. Finally, in a box labeled “YOSHIDA - DO NOT DISCARD,” he found a Panasonic Toughbook running Windows 2000, with MPLAB IDE v5.0 and a parallel-port programmer.
He powered it on. The machine groaned like a waking bear. And there, on the desktop, was a folder: LD_C101_FW_SRC.
Inside, Hana’s assembly code. She had written comments in a mix of Japanese and English, often poetic. Near the timing loop, she’d scribbled: “We must delay 1.2ms after last TX bit before RX. But USB’s jitter eats our margin. Need dynamic calibration.” Ld-c101 Usb To Ci-v Driver
Dynamic calibration. That was it.
Kenji rewrote the ISR. Instead of fixed delays, the PIC would measure the round-trip time of a dummy command at startup, then adjust its turnaround window based on the actual latency of the host USB stack. He added a small state machine to handle retries gracefully when collisions happened.
Flashed the new firmware. Plugged the Ld-c101 into his Linux laptop. dmesg showed the device. He ran minicom to the virtual serial port, typed 0xFE 0xFE 0x94 0xE0 0x03 0xFD—the CI-V command to read frequency.
The IC-735 replied: 0xFE 0xFE 0x94 0xE0 0x01 0x01 0x2D 0x40 0x00 0xFD.
14.240 MHz. Perfect.
Kenji repeated the command one hundred times in a script. Every response arrived intact. No bus deafness. No dropped bytes.
He leaned back, the chair squeaking in the silence. Somewhere, Hana Yoshida might be smiling.
Two weeks later, he uploaded the final driver and firmware patch to Kuroda’s archived FTP site, with a note: “Works on Windows 98 through Windows 11, and any Linux kernel 2.6+. CI-V timing now self-calibrates on each connection. The post office queue now has a patient clerk.”
He never heard from a single user. But that was fine. In the world of legacy hardware, a perfect driver is like a tree falling in an empty forest—it makes no sound, but the forest stays upright.
Kenji shut off the sub-basement lights for the last time. Somewhere out there, a ham operator in a storm, connecting an old Icom to a cheap USB cable, would never know why their radio suddenly worked perfectly. They’d just call it luck.
And that, Kenji thought, was the highest praise a driver could receive.
Establishing a stable connection between your PC and radio is the backbone of any digital ham shack. If you are using the LD-C101 USB to CI-V cable
, getting the right driver is the first step toward seamless rig control. 🛠️ The Core Hardware: Understanding LD-C101
The LD-C101 is a specialized interface cable designed to translate USB signals from your computer into the CI-V (Computer Interface Five) protocol used by Icom transceivers. Most versions utilize the Enables CAT (Computer Aided Transceiver) control. Compatibility:
Works with software like Ham Radio Deluxe, WSJT-X, and fldigi. 💾 Driver Installation Guide
To ensure your computer recognizes the cable as a "USB Serial Port," follow these steps: 1. Identify Your Chipset Before downloading, plug the cable in and check Device Manager (Windows) or System Report FTDI Chip: The gold standard for stability. CH340 Chip: Common in budget-friendly cables. 2. Download the Official Drivers
Avoid third-party "driver updater" sites. Use the manufacturer's direct links: FTDI VCP Drivers: ftdichip.com WCH CH340 Drivers: wch-ic.com 3. Installation Steps the cable from your PC. the driver installer as Administrator. your computer. the LD-C101. Device Manager
under "Ports (COM & LPT)" to find your assigned COM port number. ⚠️ Troubleshooting Common Issues Error Code 10:
Usually indicates a "counterfeit" Prolific chip. If your LD-C101 uses Prolific, you may need an older driver version (v3.2.0.0). No Serial Port Found: Try a different USB port, preferably a port, as some CI-V bridges struggle with USB 3.0/3.1. Baud Rate Mismatch:
Ensure the Baud Rate in your software matches the setting in your radio’s menu (usually 9600 or 19200). 🚀 Optimized Rig Control Once the driver is active, you can unlock: Match your logging software to your VFO instantly. Digital Modes: Full integration for FT8, RTTY, and PSK31. Remote Op:
Control your radio from across the room or across the globe. Quick Tip: Always check your radio's CI-V Address in the internal settings. If the software is looking for but your radio is set to , the driver will work, but the radio won't respond! To help you get on the air faster, let me know: radio model (e.g., Icom IC-7300, IC-718) are you using? operating system is on your computer? Are you seeing a specific error message in your Device Manager?
The Go to product viewer dialog for this item. is a specialized USB-to-3.5mm control cable designed for Icom amateur radios using the CI-V (Computer Interface Five) protocol. It acts as a bridge, allowing your computer to manage radio frequencies, logging, and remote operations through standard ham radio software. Review Summary: LD-C101 USB to CI-V Cable Chipset
Uses the CH340 USB-Serial chipset (varies by manufacturer, but typically CH340). Radio Interface 3.5mm mono CI-V plug. Compatibility
Works with most Icom radios having a "Remote" or CI-V jack (e.g., IC-718, IC-706, IC-7300, IC-7610). Best For
Casual logging, contesting, and digital modes (like FT8 via CAT control). Performance & User Experience To find and install the appropriate driver, follow
Users generally find these cables to be a reliable and affordable alternative to the original Icom CT-17 interface.
Software Support: It is widely compatible with major ham radio suites like Ham Radio Deluxe (HRD), N1MM Logger+, Logger32, and FLRig.
Physical Build: Many versions feature molded plugs with integrated strain relief for better durability.
Operational Note: While it handles "CAT control" (frequency and mode changes) perfectly, it does not typically pass audio or control the PTT line on its own; you'll still need an audio interface (like a SignaLink or the radio's built-in USB audio) for digital modes. Driver & Installation Guide
typically relies on the CH340 chipset, which is usually "plug-and-play" on modern Windows 10/11 systems, though manual installation is sometimes required.
The LD-C101 is a specialized USB-to-CI-V interface cable commonly used by amateur radio enthusiasts to connect Icom radios to a computer for rig control, frequency logging, and digital mode operation.
The "story" of this device is essentially one of bridging the gap between legacy analog hardware and modern digital control. The Purpose: Bridging Two Worlds
Icom’s CI-V (Computer Interface Five) is a proprietary communication protocol that allows external devices to control a radio's frequency, mode, and filter settings. While older radios used serial (RS-232) levels, modern computers rely on USB. The LD-C101 acts as the physical and logical translator:
Physical Bridge: It converts a computer’s USB port into the 3.5mm mono jack required by the radio's remote port.
Logical Bridge: Inside the cable is a serial-to-USB converter chip (often from manufacturers like FTDI or Prolific) that requires a specific driver to function. The Core Technology: Drivers & VCP
For your computer to "talk" to the radio, the LD-C101 driver creates a Virtual COM Port (VCP).
Installation: When you plug the cable in, the driver tells Windows, macOS, or Linux that this USB device should be treated as a standard serial COM port.
Recognition: Software like Ham Radio Deluxe, WSJT-X, or Omni-Rig then sends CI-V commands to that COM port.
Execution: The LD-C101 translates those digital bits into the voltage pulses the Icom radio understands. Common Troubleshooting "Plot Twists"
The most frequent issues in the LD-C101's "story" involve driver conflicts:
Counterfeit Chips: Some cheaper versions of these cables use "clone" chips. Official drivers (especially Prolific) may intentionally disable these, leading to a "Code 10" error in Device Manager.
Baud Rate Mismatch: If the software is set to 19200 baud but the radio is expecting 9600, the "conversation" between the devices will fail.
Address Conflicts: Every Icom radio has a hex address (e.g., $94 for an IC-7300). If the software isn't looking for the right address, the LD-C101 driver will be active, but the radio won't respond. Key Applications
Once the driver is correctly installed, the LD-C101 enables:
Automated Logging: Your logging software automatically records the frequency and mode of every contact.
Remote Operation: You can control your radio from across the room—or across the world—via the computer interface.
Digital Modes: Essential for operating FT8, RTTY, or PSK31 where the computer must trigger the radio to transmit.
TSW1250EVM: High-Speed LVDS Deserializer and Analysis System
Introduction
The LD-C101 USB to CI-V driver is a software component that enables communication between a computer and a device that uses the CI-V (Controller Interface-V) protocol. CI-V is a protocol used by some amateur radio devices, such as transceivers and receivers, to communicate with computers. The LD-C101 is a popular USB interface that allows users to connect their CI-V compatible devices to their computer via USB. In this essay, we will explore the importance of the LD-C101 USB to CI-V driver and its role in facilitating communication between computers and CI-V devices. Ham Radio Deluxe: Tools > Settings > Radio
What is CI-V Protocol?
The CI-V protocol is a communication standard developed by Icom, a Japanese company that specializes in amateur radio equipment. CI-V is used to control and communicate with Icom devices, such as transceivers, receivers, and other amateur radio equipment. The protocol uses a master-slave architecture, where the computer acts as the master and the device acts as the slave. The CI-V protocol allows for a range of functions, including setting frequencies, adjusting volume, and retrieving device status.
Role of LD-C101 USB to CI-V Driver
The LD-C101 USB to CI-V driver plays a crucial role in facilitating communication between a computer and a CI-V device. The driver acts as a bridge between the computer's operating system and the CI-V device, translating commands and data into a format that can be understood by the device. The driver enables the computer to send and receive data to and from the CI-V device, allowing users to control and monitor the device using software applications.
Features and Benefits
The LD-C101 USB to CI-V driver offers several features and benefits, including:
Applications
The LD-C101 USB to CI-V driver has a range of applications, including:
Conclusion
In conclusion, the LD-C101 USB to CI-V driver is an essential software component that enables communication between computers and CI-V devices. The driver's role in facilitating communication between computers and CI-V devices has made it a popular choice among amateur radio operators, researchers, and developers. With its ease of installation, compatibility, high-speed data transfer, and reliable connection, the LD-C101 USB to CI-V driver is an essential tool for anyone working with CI-V devices.
The LD-C101 is a specialized USB-to-CI-V CAT interface cable used primarily by amateur radio operators to connect Icom transceivers to a PC for rig control and frequency logging. This cable functions as a virtual COM port, translating USB signals into the CI-V (Icom Communication Interface V) protocol. 1. Identify Your Chipset
The LD-C101 typically uses one of two common USB-to-Serial chipsets. Identifying yours is critical for choosing the correct driver:
SiLabs (Silicon Labs) CP210x: Common in standard LD-C101 models. It appears as "Silicon Labs CP210x USB to UART Bridge" in Device Manager.
FTDI FT232RL: Often found in "premium" or older versions. It appears as "USB Serial Port" or requires the "FTDI VCP" driver. 2. Driver Download & Installation
Important: Install the driver before plugging the cable into your computer.
For SiLabs Chipsets: Download the latest VCP (Virtual COM Port) drivers directly from the Silicon Labs Support Page.
For FTDI Chipsets: Download the "VCP Drivers" from the FTDI Chip Website.
Alternative: Many Icom-specific cables can also use the official Icom USB Driver which supports Windows 10 and 11. USB Cable Drivers FTDI / Prolific / SiLabs / WCH - Miklor
The is a USB to CI-V control cable primarily used to interface Icom amateur radio equipment with a computer for rig control and frequency management. This interface serves as a bridge, allowing software to send and receive commands via the Icom Communications Interface V (CI-V) protocol. Driver and Chipset Details The functionality of the depends on the specific internal chipset used in the cable: CH340 Chipset: Most standard versions of the
use the USB-Serial CH340 chipset. For these, you must install the CH340 USB-to-Serial driver to create a Virtual COM Port on your PC.
FTDI Chipset: High-end variants may use an FTDI FT232RL chip, which often provides better stability across different operating systems like Windows, macOS, and Linux. Drivers for these are typically available on the FTDI Chip website.
Plug-and-Play: Once the appropriate driver is installed, the cable should be recognized as a standard serial port, requiring no additional firmware programming. Technical Specifications Interface: USB (Type A) to 3.5mm mono jack. Cable Length: Typically 1.5 meters (approx. 5 feet).
Functionality: Supports data transfer rates from 300 baud to 3 Mbaud and handles CI-V commands for frequency and mode control.
Software Compatibility: Fully compatible with major ham radio suites including Ham Radio Deluxe, N1MM, Logger32, FLRig, and Fldigi. Compatible Radios The
works with nearly any Icom radio equipped with a "Remote" or "CI-V" jack, including:
VID_10C4 or VID_10C4_PID_EA60 → CP210x.VID_067B → Prolific.VID_1A86 → CH340.CH341SER.EXE (also works for CH340)No account yet?
Create an Account