Huawei+atn+910da+datasheet+exclusive < HD >

The Huawei ATN 910D-A (often searched with the variations like 910DA) is a high-performance, 1U fixed-box router designed specifically for 5G mobile backhaul and multi-service aggregation. Positioned at the access and aggregation layers, it provides the "last mile" connectivity for base station transport and high-end VIP private lines. Exclusive Technical Specifications

The ATN 910D-A stands out in the ATN 910 Series for its massive switching capacity and high-density port configuration within a compact 1U form factor. Switching Capacity: 800 Gbps (bi-directional). Port Density: 4 x 100GE/50GE ports. 16 x 25GE/10GE/GE ports. 8 x 10GE/GE/FE ports. Dimensions: 442 mm × 220 mm × 44.45 mm (1U height). Weight: Approximately 4 kg. Power Consumption: 180W typical.

Operating Temperature: –40ºC to +65ºC, making it suitable for outdoor cabinet deployments.

Power Redundancy: Supports dual DC/AC inputs with 1+1 backup. Core 5G-Ready Features

The router is built on a programmable NP architecture, ensuring it can adapt to future network requirements without hardware overhauls.

Network Slicing (FlexE): Supports Flexible Ethernet (FlexE) to divide a single physical port into multiple logical slices. This ensures strict bandwidth isolation for different services, such as mission-critical industrial data vs. general consumer traffic.

Advanced Protocols: Fully supports SRv6 (Segment Routing over IPv6) and EVPN (Ethernet VPN), which simplify network protocols and enable automated service provisioning.

High-Precision Synchronization: Essential for 5G networks, it supports 1588v2, G.8275.1 (full-mode OC, TC, BC), and Synchronous Ethernet clocking.

Intelligent O&M (iFIT): Uses In-situ Flow Information Telemetry (iFIT) for millisecond-level in-band flow detection. This allows operators to visualize service quality and demarcate faults within minutes. Reliability and Deployment

The ATN 910D-A is engineered for carrier-grade reliability with millisecond-level fault detection.

Fast Protection Switching: Supports IP FRR, LDP FRR, and TI-LFA (Topology-Independent Loop-Free Alternate) to ensure protection switching under 50ms.

Environmental Hardening: Its wide temperature range and industrial-grade components allow it to be co-deployed with base stations in harsh environments.

Plug-and-Play: Supports automated rollout through iMaster NCE, significantly reducing the time required for large-scale site deployments. Market Positioning and Cost

As a part of the Huawei ATN Series, the 910D-A helps carriers lower the Total Cost of Ownership (TCO) by unifying 2G, 3G, 4G, and 5G transport on a single platform. Pricing for these units typically ranges from $13,000 to $15,000 for basic configurations, though specialized high-anti-corrosion or high-capacity models can exceed $35,000 depending on the region and license packages. ATN910B - Huawei Carrier

Huawei ATN 910D-A is a compact, high-capacity 1U fixed-port router designed primarily for 5G base station access and VIP private line services

. It features an 800Gbps system capacity and supports advanced 5G-ready features such as SRv6, FlexE slicing, and high-precision clock synchronization. Key Technical Specifications System Capacity 800Gbps switching capacity Interface Density 4 x 100GE/50GE + 16 x 25GE/10GE/GE + 8 x 10GE/GE/FE Dimensions (HxWxD) 44.45mm (1U) x 442mm x 220mm Approximately 4kg Power Input Dual DC/AC, 1+1 backup redundancy Power Consumption Typical: 180W Operating Temp -40°C to +65°C, supporting outdoor cabinet deployment Exclusive & Advanced Features 5G Ready Architecture : Supports

(Segment Routing over IPv6) and EVPN for simplified network evolution and automated service deployment. Network Slicing : Utilizes

(Flexible Ethernet) technology to provide hard-pipe isolation for different services, ensuring zero interference between slices. Intelligent O&M : Integrated with

(In-situ Flow Information Telemetry) for real-time, millisecond-level service quality monitoring and fault location. High Precision Sync : Supports

and G.8275.1/G.8275.2 protocols for ultra-precise clock synchronization required by 5G networks. Carrier-Grade Reliability

: Features less than 50ms protection switching and supports technologies like

(Topology-Independent Loop-free Alternate) for rapid failover. Deployment Scenarios 5G Transport

: Ideal for base station access due to its high-density 100GE/50GE ports and compact 220mm depth, allowing it to share cabinets with wireless Baseband Units (BBU). Enterprise Private Lines

: Provides multi-service access for VIP customers using L2VPN, L3VPN, and HQoS for guaranteed service levels.

For further technical documentation and manuals, you can visit the Huawei ATN 910D Support Guide Enterprise Product DataSheet ATN 910D-A Brochure v2.0 | PDF - Scribd

Huawei ATN 910DA Datasheet Guide

Introduction

The Huawei ATN 910DA is a high-performance, compact, and versatile network equipment designed for small to medium-sized enterprises, data centers, and service provider networks. This guide provides an overview of the Huawei ATN 910DA datasheet, highlighting its key features, specifications, and use cases.

Key Features

1. Compact Design: The ATN 910DA is a compact, 1RU (1 rack unit) device, ideal for space-constrained environments.
2. High-Performance: Equipped with a powerful processor and ample memory, the ATN 910DA delivers high-performance routing, switching, and security features.
3. Multi-Gigabit Ethernet: The device supports multiple Gigabit Ethernet ports, including 10G and 2.5G, providing flexible connectivity options.
4. Advanced Security: The ATN 910DA features robust security capabilities, including firewall, VPN, and threat detection and mitigation.
5. Flexible Management: The device supports various management interfaces, including CLI, WebUI, and SNMP, ensuring easy configuration and monitoring.

Specifications

1. Hardware Specifications
   • Processor: 64-bit, quad-core processor
   • Memory: 8 GB RAM, 2 GB Flash
   • Storage: 1x USB 2.0 port
2. Network Specifications
   • 8x GE (RJ45) ports
   • 2x 10GE (SFP+) ports
   • 2x 2.5GE (RJ45) ports
   • 1x MGMT (RJ45) port
3. Performance Specifications
   • Routing performance: up to 10 Gbps
   • Switching performance: up to 20 Gbps
4. Security Specifications
   • Firewall: Stateful inspection, zone-based firewall
   • VPN: IPSec, L2TP, PPTP
   • Threat detection and mitigation: integrated

Use Cases

1. Enterprise Networks: The ATN 910DA is suitable for small to medium-sized enterprises, providing a compact, high-performance network solution for LAN and WAN deployments.
2. Data Centers: The device can be used in data centers to provide high-density, low-latency connectivity for servers and storage systems.
3. Service Provider Networks: The ATN 910DA can be used by service providers to offer high-performance, secure network services to their customers.

Additional Information

1. Operating System: The ATN 910DA runs on Huawei's VRP (Versatile Routing Platform) operating system.
2. Warranty: The device comes with a standard 1-year warranty, with optional extended warranty options available.
3. Support: Huawei provides comprehensive support for the ATN 910DA, including documentation, software updates, and technical support.

Conclusion

The Huawei ATN 910DA is a versatile, high-performance network equipment suitable for various applications, including enterprise networks, data centers, and service provider networks. This guide provides a comprehensive overview of the device's key features, specifications, and use cases. For more detailed information, refer to the official Huawei ATN 910DA datasheet.

Huawei ATN 910DA Datasheet: Unlocking the Power of Advanced Networking

In the rapidly evolving landscape of modern telecommunications and networking, the demand for high-performance, scalable, and secure network infrastructure has never been more pressing. Huawei, a global leader in information and communication technology (ICT), has been at the forefront of this evolution, consistently delivering innovative solutions that cater to the complex needs of network operators, enterprises, and service providers. One such solution is the Huawei ATN 910DA, a versatile and advanced network equipment designed to meet the rigorous demands of next-generation networks. This essay provides an in-depth look at the Huawei ATN 910DA datasheet, highlighting its exclusive features and capabilities that set it apart in the competitive networking landscape.

Overview of Huawei ATN 910DA

The Huawei ATN 910DA is part of Huawei's ATN (All-Transport Network) series, which is engineered to provide a unified, intelligent, and secure transport network solution. This series is particularly noted for its ability to support a wide range of network applications, from broadband access and aggregation to the transport of high-speed data and real-time communications services.

Key Features and Specifications

• High-Performance Processing: The ATN 910DA is equipped with advanced hardware and software technologies that enable high-speed packet processing and forwarding. This ensures that network services are delivered with minimal latency and maximum throughput.

• Flexible Network Slicing: Supporting network slicing allows for the creation of multiple virtual networks over a shared physical infrastructure. This feature is particularly beneficial for service providers looking to offer customized network services to different customers or for different applications.

• Enhanced Security: The ATN 910DA incorporates robust security features, including encryption, secure access, and threat detection and mitigation. These features are designed to protect the network and its users from a wide array of cyber threats.

• Scalability and Flexibility: The platform is designed to scale, allowing network operators to easily upgrade or add new capacity as demand grows. This scalability, combined with its flexible architecture, makes the ATN 910DA suitable for a variety of network environments.

• Energy Efficiency: Huawei emphasizes energy efficiency in its designs, and the ATN 910DA is no exception. With power-saving technologies and efficient cooling systems, it helps network operators reduce their operational costs and environmental footprint.

Exclusive Features

What sets the Huawei ATN 910DA apart in the market are its exclusive features tailored to meet the specific needs of modern network infrastructures:

• Intelligent Network Management: The ATN 910DA comes with advanced network management capabilities, including AI-driven insights and automation tools. These enable proactive network monitoring, predictive maintenance, and rapid troubleshooting, significantly improving network reliability and operational efficiency.

• Integration with Huawei Ecosystem: As part of Huawei's broader ICT ecosystem, the ATN 910DA seamlessly integrates with other Huawei solutions and products. This integration facilitates a holistic approach to network design, deployment, and management, offering customers a more streamlined and efficient experience.

• Support for Future-Proof Technologies: The ATN 910DA is designed with future technologies in mind, including support for 5G, IoT, and cloud-native applications. This forward-thinking approach ensures that the platform remains relevant and valuable for years to come, providing a solid foundation for network evolution.

Conclusion

The Huawei ATN 910DA datasheet reveals a powerful and versatile networking solution that addresses the complex challenges of modern network infrastructure. With its high-performance capabilities, flexible architecture, enhanced security features, and exclusive intelligent network management tools, the ATN 910DA stands out as a leading choice for network operators and enterprises seeking to build or upgrade their network infrastructures. As the networking landscape continues to evolve, solutions like the Huawei ATN 910DA will play a crucial role in shaping the future of telecommunications and ICT.

The Huawei ATN 910D-A is a large-capacity, 1U case-shaped router designed for 5G mobile backhaul and VIP private line services. It features an 880Gbps switching capacity and high-density 100GE ports, making it suitable for large-scale access device deployment. Key Technical Specifications

The ATN 910D-A is built for high-performance intelligent IP networks with a focus on 5G-ready features. Switching Capacity: 880Gbps. Interface Density: 4 x 100GE/50GE ports. 16 x 25GE/10GE/GE ports. 8 x 10GE/GE/FE ports. Dimensions: 442mm x 220mm x 44.45mm (1U height). huawei+atn+910da+datasheet+exclusive

Weight: Approximately 4.2 kg (DC) to 4.3 kg (AC) without packaging.

Power Consumption: Typical power consumption is approximately 180W.

Power Redundancy: Supports dual DC/AC power inputs with 1+1 backup.

Operating Temperature: Industrial-grade design supporting -40°C to +65°C, allowing for outdoor cabinet deployment. Advanced Features

The router supports modern networking protocols required for high-speed data transmission and 5G slicing.

L3 Features: Supports OSPF, BGP, ISIS, Static routes, and advanced IPv6 features like 6PE and 6VPE.

SR/SRv6 & EVPN: Fully supports Segment Routing (SR) and SRv6 (BE/Policy), as well as Ethernet VPN (EVPN) for both L2 and L3 services.

Network Slicing: Implements slicing based on FlexE deployment to meet different 5G service requirements.

Synchronization: High-precision clock synchronization including IEEE 1588v2, G.8275.1, and Synchronous Ethernet.

OAM & Management: Includes features like iFIT (in-situ Flow Information Telemetry) for real-time performance monitoring and Plug-and-Play (PnP) for simplified deployment. Application Scenarios ATN 910D-A Brochure v2.0 | PDF - Scribd

Huawei ATN 910DA Datasheet: Exclusive Insights and Specifications

The Huawei ATN 910DA is a cutting-edge, high-performance access node designed to meet the evolving needs of modern telecommunications networks. As a leading player in the networking and telecommunications industry, Huawei continues to innovate and push the boundaries of what is possible with its latest offerings. In this article, we will delve into the exclusive datasheet of the Huawei ATN 910DA, exploring its key features, specifications, and benefits.

Introduction to Huawei ATN 910DA

The Huawei ATN 910DA is a versatile access node that supports a wide range of interfaces and applications, making it an ideal solution for various network deployment scenarios. This node is designed to provide high-speed, reliable, and secure connectivity for a large number of users, supporting a broad range of services, including broadband access, voice, and data.

Key Features and Benefits

The Huawei ATN 910DA datasheet reveals a comprehensive set of features and benefits that make it an attractive solution for network operators and service providers. Some of the key features include:

• High-performance hardware platform: The ATN 910DA is powered by a high-performance processor and equipped with ample memory and storage, ensuring smooth and efficient operation even under heavy loads.
• Multi-interface support: The node supports a wide range of interfaces, including Gigabit Ethernet, 10 Gigabit Ethernet, and EPON, allowing for flexible network design and easy integration with existing infrastructure.
• Advanced Quality of Service (QoS): The ATN 910DA features advanced QoS capabilities, ensuring that critical applications and services receive priority treatment and optimal network performance.
• Robust security features: The node includes robust security features, such as firewall, VPN, and access control, to protect against unauthorized access and malicious activities.

Technical Specifications

The Huawei ATN 910DA datasheet provides detailed technical specifications, which are summarized below:

• Hardware Specifications:
  • Processor: High-performance processor with 64-bit architecture
  • Memory: Up to 16 GB of RAM and 256 GB of storage
  • Interfaces: 8 x Gigabit Ethernet, 2 x 10 Gigabit Ethernet, 1 x EPON
• Software Specifications:
  • Operating System: Huawei's proprietary VRP (Versatile Routing Platform)
  • Supported protocols: OSPF, IS-IS, BGP, MPLS, and more
  • QoS features: Advanced QoS, traffic shaping, and policing

Exclusive Insights

The Huawei ATN 910DA datasheet also reveals some exclusive insights into the node's capabilities and design. For instance:

• Scalability and flexibility: The ATN 910DA is designed to be highly scalable and flexible, allowing network operators to easily upgrade and expand their networks as needed.
• Energy efficiency: The node features energy-efficient design and components, reducing power consumption and minimizing environmental impact.
• Integration with Huawei ecosystem: The ATN 910DA is fully integrated with Huawei's broader ecosystem, including its network management system, assurance platform, and security solutions.

Market and Competitive Landscape

The access node market is highly competitive, with several major players vying for market share. However, the Huawei ATN 910DA datasheet demonstrates that Huawei remains a leader in the industry, with a strong focus on innovation, performance, and customer needs.

Conclusion

The Huawei ATN 910DA datasheet provides a comprehensive overview of this powerful access node, highlighting its key features, specifications, and benefits. With its high-performance hardware platform, advanced QoS capabilities, and robust security features, the ATN 910DA is an attractive solution for network operators and service providers seeking to upgrade their networks and deliver high-quality services to their customers. As the telecommunications industry continues to evolve, Huawei's ATN 910DA is well-positioned to play a critical role in shaping the future of networking and communication.

6. Why “Exclusive” in Real-World Deployments?

Network architects prize the ATN 910D-A for three niche scenarios:

1. Rural 5G backhaul – No fan = no filter replacement. Operates in dust storms, salt spray, or extreme cold.
2. Railway / roadside ITS – Shock/vibration tolerant (IEC 61373 Class B).
3. Legacy modernization – Replace separate SDH + router with one unit running E1 pseudowire.

Availability note: Huawei lists the ATN 910D-A as Active but may prioritize it for specific verticals (transport, utilities, defense) rather than general enterprise. This “exclusive” sales channel is why detailed public datasheets remain scarce. The Huawei ATN 910D-A (often searched with the

Deployment recommendations

1. Verify regional SKU supports local LTE/NR bands and carrier certifications.
2. Use external high-gain antennas for long-distance links; align directional antennas carefully.
3. Configure VPN and firewall rules before deployment; enable secure admin accounts and change default passwords.
4. Enable QoS for voice/video services and monitor throughput/latency during peak hours.
5. Schedule firmware updates during maintenance windows and use remote provisioning for fleet devices.

10. Compliance & Certifications

| Standard | Status | |----------------|---------------------------------| | CE, FCC, RoHS | Compliant | | NEBS Level 3 | Optional (with extended chassis)| | ETSI 300 019 | Class 3.3 (environmental) | | ITU‑T G.8262 | SyncE clock quality |

Key specifications

• Radio

  • Supported bands: LTE bands (B1/B3/B7/B8/B20/B28 typical) and NR (sub-6 GHz) — multi-band variants available.
  • Peak downlink/upstream data rates: LTE category 12/13 class-equivalent; NR sub-6 performance depends on variant and carrier aggregation.
  • Antenna: Integrated directional/omnidirectional options; external antenna ports (SMA/TS-9 or N-type depending on SKU).
  • MIMO: 2x2 or 4x4 MIMO depending on model.
  • Carrier aggregation: Supported (multi-carrier CA for higher throughput).

• Interface & Connectivity

  • Ethernet: 1x Gigabit Ethernet LAN/WAN (RJ45) with PoE/PoE+ support on selected SKUs.
  • Serial/Console: RS-232/TTL console port for local management.
  • USB: 1x USB 2.0 for local storage/diagnostics (model-dependent).
  • SIM: 1x or 2x nano-SIM slots with SIM lock options.
  • Wi‑Fi: Optional integrated Wi‑Fi 5 (802.11ac) Access Point on some variants.

• Routing & Network

  • WAN: LTE/NR cellular link with support for static IP, DHCP, PPPoE.
  • LAN: NAT, DHCP server, VLAN tagging, multiple SSIDs (if Wi‑Fi present).
  • VPN: IPsec and SSL VPN client/server functionality.
  • QoS: Traffic shaping, priority queues for latency-sensitive services.
  • Management: TR-069, SNMP, Web GUI, and CLI; remote provision and firmware upgrade support.

• Security

  • Firewall: Stateful packet inspection (SPI).
  • Encryption: AES-based encryption for VPN; secure boot and firmware signing on production firmware.
  • Access control: MAC/URL filtering, RADIUS support, role-based admin accounts.

• Physical & Environmental

  • Dimensions: Compact form factor ~200 × 120 × 60 mm (approximate; varies by SKU).
  • Weight: Light, typically under 1 kg.
  • Ingress protection: IP65 or IP67 rated enclosure options for outdoor use.
  • Operating temperature: -40°C to +60°C (industrial grade).
  • Power: 12–48 V DC input; PoE/PoE+ support (IEEE 802.3af/at on supported SKUs); low-power standby modes.

• Certifications & Compliance

  • Regulatory: CE, FCC, RoHS, and regional carrier certifications depending on SKU and market.
  • Carrier approvals: Available for several global operators; specific band/approval depends on region.

3. Switching Capacity

This is where the "DA" series distinguishes itself from standard access nodes.

• Switching Architecture: Full cross-connect switching.
• Packet Switching Capacity: Up to 120 Gbit/s (bidirectional).
• **TDM Switching Capacity

The Huawei ATN 910D-A (often referred to as the 910DA in technical circles) is a high-performance, 1U fixed multi-service access router specifically engineered for the 5G era.

Below is an "exclusive" datasheet-style breakdown of its core capabilities and a narrative "story" of how it functions in modern networks. The Narrative: The "Last-Mile" Powerhouse In the story of a global 5G rollout, the ATN 910D-A

acts as the critical bridge between massive core networks and local base stations. While core routers handle terabits of data, the

sits in the "last mile," ensuring that high-speed data—whether from a 5G cell tower or a high-priority "VIP" corporate private line—is delivered with millisecond precision.

Its "exclusive" value lies in its density-to-size ratio. It fits into tight cabinets alongside wireless baseband units (BBUs), yet provides a massive 800 Gbps switching capacity, allowing it to aggregate heavy traffic without breaking a sweat. Exclusive Technical Datasheet: ATN 910D-A Category Specifications & Features System Capacity 800 Gbps switching capacity in a 1U chassis. Interface Density 4 × 100GE/50GE + 16 × 25GE/10GE/GE + 8 × 10GE/GE/FE. 5G Readiness Supports SRv6, EVPN, and FlexE for network slicing. Precision Timing