Huawei E5573 Drivers Windows 10 Upd -

Connect your device to your PC using a high-quality USB cable.

A virtual CD-ROM drive should appear in "This PC." Open it and run AutoRun.exe to install the Huawei Dashboard and necessary drivers. Web Interface: If it doesn't auto-launch, open your browser and go to 192.168.8.1 to manage your connection settings. 2. Manual Driver Update via Device Manager

If your computer detects the device but can't "talk" to it, you may need to update the drivers manually as suggested by this guide on manual driver installation Right-click the button and select Device Manager

Look for "Other Devices" or "Network Adapters" with a yellow exclamation mark (likely labeled "HUAWEI Mobile"). Right-click the device and select Update driver Search automatically for drivers . If Windows fails to find them, you can also check for Optional Updates Windows Update advanced settings 3. Troubleshooting Connection Issues If you've installed the drivers but still can't connect: Check the SIM:

Ensure the SIM card is properly seated and the device is powered on. Wi-Fi Alternative:

If USB drivers are failing, you can connect via Wi-Fi. Find your SSID and Password

on the inside of the back cover, then connect through your Windows Wi-Fi menu as detailed here Reset the Device:

If the settings are scrambled, you can perform a factory reset by pressing the small Reset button under the back cover with a pin for a few seconds as shown in this tutorial Quick Specs Micro USB, Wi-Fi 150 Mbps (LTE) Windows Support Windows 7, 8, 8.1, 10, 11

Is your device currently showing up in Device Manager with an error code, or is it not appearing at all?

Huawei E5573 Go to product viewer dialog for this item. is a highly portable 4G LTE mobile Wi-Fi hotspot, popular for its compact design and reliable connectivity. However, users often face driver-related issues when connecting it via USB to Windows 10, as the operating system may fail to recognize the device automatically. Core Functionality of Drivers Drivers for the Huawei E5573

act as the essential bridge between the device's firmware and the Windows 10 environment. Without them, your computer cannot communicate with the modem for: USB Tethering: Using the as a wired modem for faster, more stable internet.

Web Dashboard Access: Managing settings via the local IP address (e.g., 192.168.8.1). huawei e5573 drivers windows 10

Firmware Updates: Applying critical security and performance patches. Types of Required Drivers

For full functionality on Windows 10, the following driver components are typically needed:

USB Composite Device Driver: Basic recognition of the hardware when plugged in.

Huawei Mobile Connect - Network Card: Enables the system to treat the device as a network adapter.

Huawei Mobile Connect - Modem: Allows legacy dial-up or specialized connection software to interface with the device.

PC UI Interface: Necessary for sending commands to the device and performing firmware updates. How to Install Drivers on Windows 10

Windows 10 generally attempts to install these automatically, but manual intervention is often required. 1. Using the Virtual CD-ROM When first plugged in, the often appears as a Virtual CD-ROM drive in "This PC." Open the drive and run AutoRun.exe or Setup.exe.

This installs the Mobile Broadband HL Service, which includes the necessary drivers. 2. Using Huawei PC Manager

For official support, Huawei PC Manager can automatically detect and update non-built-in drivers for Huawei devices connected to your system. 3. Manual Update via Device Manager

If the device shows up as "Unknown Device" or with a yellow exclamation mark: Right-click Start and select Device Manager.

Find the device under "Ports (COM & LPT)" or "Other devices." Connect your device to your PC using a

Right-click it, select Update driver, and choose Search automatically for updated driver software. Updating Device Software

Beyond PC drivers, keeping the device's internal software updated is critical. You can perform an update directly through the modem's web interface: Connect to the via Wi-Fi or USB.

Navigate to the IP address listed on the sticker under the battery (usually 192.168.8.1).

Go to More Functions > Manage Updates > Update Now to ensure you are running the latest version. Troubleshooting Common Issues

Device Not Detected: Ensure you are using the original USB cable. Some "charging-only" cables do not support data transfer.

Incompatible Drivers: If old drivers cause conflicts, you can uninstall them by right-clicking the device in Device Manager and selecting Uninstall device.

Windows 10 "Driver Signature" Error: In some cases, Windows 10 may block older Huawei drivers because they aren't digitally signed for the latest OS build. You may need to temporarily disable "Driver Signature Enforcement" to complete the installation. Driver List-HUAWEI Official Site

Conclusion: Master Your Huawei E5573 on Windows 10

The Huawei E5573 drivers for Windows 10 are not mythical or hard to find – they are likely already on your portable hotspot’s internal storage. The key is understanding that USB tethering is optional, and Wi-Fi remains the most trouble-free method.

However, when USB tethering is required (e.g., for a PC without Wi-Fi, or for a more stable, latency-sensitive connection), the NDIS driver installation is straightforward if you follow the steps outlined above. Avoid third-party driver sites, trust Windows’ built-in capabilities, and when in doubt, use the web interface to switch USB modes.

With the right drivers, the Huawei E5573 transforms from a mere travel router into a robust, always-on 4G backup adapter for your Windows 10 PC – no configuration, no fuss, just reliable internet anywhere.

Further Resources:

• Official Huawei firmware changelogs (community archives)
• Windows 10 USB tethering troubleshooting (Microsoft Support)
• E5573 user manual (PDF) – available on archive.org

Last updated: For Windows 10 version 22H2 and all E5573 variants (E5573s-320, E5573s-856, E5573Cs-609, E5573Bs-520).

Part 3: Step-by-Step Driver Installation for Windows 10 (Visual Guide)

Let’s walk through a clean installation from scratch.

Prerequisites:

• Windows 10 (32-bit or 64-bit) – the E5573 works on both.
• Administrative access on your PC.
• A good USB data cable (test with another device).

Procedure:

1. Disable Wi-Fi on your PC (to ensure you test USB tethering properly).
2. Turn on the E5573 (ensure it has a working SIM and signal bars).
3. Connect via USB. Wait 10 seconds.
4. Check Device Manager:
   • Open devmgmt.msc.
   • Expand "Network adapters." Look for "Huawei Mobile Connect - Network Card" or "Remote NDIS."
   • Also check "Ports (COM & LPT)" – you may see "Huawei Mobile Connect - Application Interface (COMx)." This indicates the driver is active.
5. Check Network Connections:
   • Press Win + R, type ncpa.cpl.
   • Look for "Ethernet" or "Local Area Connection" with the name "Huawei NDIS" or "Remote NDIS."
   • If it’s "Unidentified network" or "No internet," you may need to disable/re-enable the adapter.
6. Test: Open browser and navigate to http://192.168.8.1 (default login: admin/admin). If the admin interface loads via USB, your drivers are working perfectly.

Method 3: Manual Download (If Methods 1 & 2 Fail)

If the virtual drive is corrupted, Windows cannot find the driver, or you need to reinstall a corrupted device, you will need to download the driver manually.

Where to download:

• Official Huawei Support: Visit the Huawei consumer support website. Search for "Mobile Wi-Fi" and look for the E5573 model.
• Carrier Websites: If your device is locked to a carrier (like T-Mobile, EE, Airtel, etc.), their support pages often host the specific dashboard and driver software.

Installation Steps:

1. Download the zip file (often named MobileWiFi_Driver or similar).
2. Extract the contents to a folder on your desktop.
3. Right-click the Start button in Windows 10 and select Device Manager.
4. Look for an unknown device or a device with a yellow exclamation mark. It might be listed under "Other devices" or "Portable Devices."
5. Right-click the device and select Update driver.
6. Choose "Browse my computer for driver software."
7. Select the folder where you extracted the downloaded files.
8. Click Next and let Windows install the necessary software.

Troubleshooting

• Device not recognized:
  • Try different USB cable/port (use a data cable, not charge-only).
  • Install Huawei HiLink/Mobile Partner package first.
  • In Device Manager, uninstall the unknown device and scan for hardware changes.
• Windows installs generic driver but tethering fails:
  • In the device web UI (open 192.168.8.1 in browser when connected), enable USB tethering if available.
  • Check APN settings in the device and SIM status.
• Driver signature/compatibility issues:
  • Use drivers that explicitly state Windows 10 support. Avoid unsigned drivers unless you can verify source.
• Firmware lock or blocked by carrier:
  • Some carrier-locked units require a specific firmware or unlock code; consult carrier or use official unlock channels.

Q5: Is there a 64-bit driver specifically for E5573?

A: Yes, all modern Huawei NDIS drivers are 64-bit. Use version 22.001.05.00.03 or newer.

Part 5: The Best Alternative – No Drivers Needed

Given the hassle of driver management, most experienced users recommend using the E5573’s Wi-Fi exclusively on Windows 10. Here’s why:

• Zero driver conflicts – No NDIS, no HiLink, no signature enforcement.
• Better speed – The E5573’s 802.11n Wi-Fi can handle up to 150 Mbps, which is often faster than USB 2.0 tethering.
• Mobility – You can place the hotspot in a location with better cellular signal while your computer stays put.
• Multiple devices – Share the connection with phones, tablets, and other laptops simultaneously.

If you absolutely need a wired connection (e.g., for a desktop PC without Wi-Fi), consider a cheap USB Wi-Fi adapter instead of wrestling with USB tethering drivers.