Unlocking the bootloader on your Redmi Note 10 Pro Max Go to product viewer dialog for this item.
(codename: "sweetin") is a multi-step process that requires a Windows PC, a Mi Account, and a mandatory waiting period. This procedure is official but will completely wipe all data on your device and may void your warranty. Pre-Unlock Checklist
Before starting, ensure you have met the following requirements: Backup Data: All photos, apps, and files will be erased.
Mi Account: Log in to a Mi Account on your phone. Ideally, this account should be at least 30 days old.
Active SIM Card: You must use mobile data (not Wi-Fi) to link your account to the device.
PC Tools: Download the official Mi Unlock Tool and install Xiaomi USB Drivers. Phase 1: Preparing the Device
Enable Developer Options: Go to Settings > About Phone and tap MIUI Version (or HyperOS version) 7 times until you see "You are now a developer!".
Toggle Settings: Navigate to Settings > Additional Settings > Developer Options. Enable OEM Unlocking. Enable USB Debugging. Link Mi Account: In Developer Options, tap Mi Unlock Status. Turn off Wi-Fi and turn on Mobile Data. Tap Add account and device. Wait for a success message. Phase 2: The Unlocking Process
Boot into Fastboot Mode: Power off your phone. Press and hold the Volume Down + Power Button simultaneously until the Fastboot logo appears.
Connect to PC: Plug your phone into your PC using a high-quality USB cable. Run Mi Unlock Tool:
Open miflash_unlock.exe on your PC and sign in with the same Mi Account used on the phone. The tool should detect your device. Click Unlock.
Note: On your first attempt, you will likely see a message saying "Could not unlock, please unlock after 168 hours" (7 days). Do not log out of your Mi Account or factory reset the phone during this time, or the timer may reset.
Final Unlock: After the waiting period, repeat the Fastboot steps and click Unlock in the tool again. It will now reach 100% and show "Unlocked successfully". Post-Unlock Information
The sun had just set over the edge of my desk, casting long shadows across the keyboard. My Redmi Note 10 Pro (codenamed Sweet) sat there, innocent-looking, running MIUI just as Xiaomi intended. But I was bored. Bored of the ads in the file manager. Bored of the default launcher. I wanted freedom.
So began my quest. The quest to unlock the Bootloader.
Step 1: The Application (The Wait)
The first thing I learned was patience. Unlike a OnePlus or a Pixel, Xiaomi doesn’t just hand you the keys.
I picked up my phone and navigated to Settings > About Phone > MIUI Version. I tapped it seven times until the toast message appeared: “You are now a developer.”
Back in Additional Settings > Developer Options, I found the holy grail: Mi Unlock Status. But first, I had to bind my account. I tapped “Add account and device”, but it warned me: Wait 168 hours.
Seven days. A full week of staring at my phone, unable to do anything but wait for the servers to approve me.
Step 2: The Tools
Seven days later, I opened my Windows laptop. I downloaded the Mi Unlock Tool from the official Xiaomi community page. I also made a critical decision: download USB drivers. Without them, the PC wouldn't recognize my phone.
I powered down the Sweet. Holding the Volume Down + Power button simultaneously, I felt the buzz. The screen lit up with a hare fixing a robot—Fastboot mode.
Step 3: The First Attempts (The Fear)
I plugged the phone into the USB 2.0 port (USB 3.0 often fails here). I opened the Mi Unlock Tool, signed in with my Xiaomi account, and... “Couldn’t unlock. Account is not bound to this device.”
Panic. I had waited 168 hours. Why?
I realized my mistake. I had bound my account in developer settings before the wait, but I didn’t have "OEM Unlocking" toggled on. I rebooted to system, toggled it, and re-bound the device. Another 7 days? No. This time, only 24 hours.
Step 4: The Click
Finally, Friday night. 11:59 PM. I ran the tool again. This time, the progress bar moved. 10%... 50%... 90%...
“Unlocked successfully.”
I didn't cheer. I just breathed.
The phone rebooted. But this was the scary part: a reboot after unlocking wipes everything. All my photos, chats, saved games—gone. It was a digital factory reset, a clean slate.
Step 5: The Aftermath
I watched the phone boot up. The setup screen looked the same, but deep in the hardware, a single flag had flipped from 0 to 1. Secure boot was off.
Now, I could flash TWRP. I could install LineageOS. I could root with Magisk.
But as I looked at the blank home screen, I realized something: unlocking the bootloader wasn't just about custom ROMs. It was about ownership. It was turning my Redmi Note 10 Pro from Xiaomi’s phone into my phone. How to unlock Bootloader in REDMI Note 10 Pro M...
Warning for the reader: Unlocking breaks Widevine L1 (Netflix downgrades to SD quality). It trips the SafetyNet. And your bank apps might cry. But for those who want absolute control? The 168-hour wait is just the price of admission.
Unlocking the bootloader of your REDMI Note 10 Pro Max (codename: sweet) is the first step toward complete device customization, allowing you to install custom ROMs, kernels, and root your device. Pre-Unlocking Essentials Before you begin, ensure you have the following: A Windows PC: The official Mi Unlock Tool is required.
SIM Card & Mobile Data: A SIM card must be inserted; you cannot bind your account over Wi-Fi.
Data Backup: The process will erase all user data. Back up everything before starting.
Mi Account: Ensure you have a valid Mi Account logged into your phone. Step 1: Enable Developer Options Boot Loader Lock Use Introduction FAQ - Xiaomi
Unlocking the bootloader on the Redmi Note 10 Pro Go to product viewer dialog for this item.
is a multi-day process that requires both the device and a Windows PC. This review outlines the official procedure, updated for 2026 requirements. Pre-Unlocking Checklist
Data Backup: Unlocking wipes all user data including photos, apps, and messages.
Xiaomi Account: You must have a valid Mi account logged into the device.
Hardware: A high-quality USB data cable and a PC running Windows are required.
Network: You must use mobile data (not Wi-Fi) to bind your account to the device. Phase 1: Device Preparation
Enable Developer Options: Go to Settings > About Phone and tap MIUI Version 7 times until you see "You are now a developer!".
Toggle Settings: Navigate to Additional Settings > Developer Options. Enable OEM Unlocking and USB Debugging.
Bind Account: Tap Mi Unlock Status. Turn off Wi-Fi, enable mobile data, and tap "Add account and device".
Note: If you are on HyperOS, you may first need to apply for permissions through the Xiaomi Community App. Phase 2: The PC Unlock Process
Download Tool: Get the official Mi Unlock Tool from the Xiaomi Unlock page and extract it on your PC. Fastboot Mode : Power off your Redmi Note 10 Pro
. Press and hold Power + Volume Down until the "Fastboot" logo appears.
Connect & Login: Connect the phone to your PC via USB. Open miflash_unlock.exe on your PC and sign in with the same Mi account used on the phone.
Initial Attempt: Click "Unlock anyway". On the first try, the tool will almost always show a message: "Couldn't unlock. Please unlock 168 hours later". Phase 3: The Waiting Period Duration: Usually 168 hours (7 days).
Rules: You can use the phone normally during this time, but do not sign out of the Mi account or factory reset the device, as this will reset the timer.
Final Step: After the timer expires, repeat Phase 2. The tool will reach 100%, and the phone will reboot with an "unlocked" padlock icon at the top of the boot screen. Critical Risks & Considerations Consequence Warranty
Unlocking technically voids the official warranty in many regions. Security
The device becomes more vulnerable to unauthorized access if lost. App Support
Some banking apps or streaming services (Netflix HD) may stop working due to failed integrity checks. OTA Updates
While you still receive official updates, they may fail to install automatically if the system partition is modified.
To unlock the bootloader on your REDMI Note 10 Pro Max , you must use the official Mi Unlock Tool
and bind your Xiaomi account to the device. Be aware that this process wipes all data and will likely require a 168-hour (7-day) waiting period before the final unlock can be completed. 1. Prerequisites Back up your data : All personal files, photos, and apps will be deleted. Xiaomi Account
: You must have a valid Xiaomi account logged into the phone.
: A SIM card with active mobile data is required for the binding process; Wi-Fi will not work for this step. PC & Cable : A Windows PC and a high-quality USB cable. 2. Enable Developer Options & Bind Account Enable Developer Options : Go to Settings > About Phone and tap MIUI Version Enable Settings Settings > Additional Settings > Developer Options OEM Unlocking USB Debugging Bind Account Mi Unlock Status > Add account and device while using mobile data 3. Use the Mi Unlock Tool on PC Download and open the Mi Unlock Tool on your PC, signing in with the same account. Boot your phone into Fastboot Mode (Volume Down + Power) and connect it to the PC.
in the tool; you will likely see a message requesting you to wait 168 hours. 4. Final Unlocking Wait 168 Hours
: Keep your account signed in and avoid factory resetting during this time.
: After the wait, enter Fastboot mode again and run the tool to complete the process, resulting in an "Unlocked" status. custom ROMs
are currently most stable for the REDMI Note 10 Pro Max once you're unlocked? Complete Guide to Unlocking the Bootloader
Unlocking the bootloader on a Redmi Note 10 Pro Max is a multi-step official process that involves a mandatory waiting period. This action erases all user data, so a full backup is essential before starting. Core Requirements
Xiaomi Account: Must be logged into the device and bound to the "Mi Unlock status". Unlocking the bootloader on your Redmi Note 10
Mobile Data: You must use mobile data (Wi-Fi off) to bind the device to your account.
PC & Tools: A Windows PC with the Mi Unlock Tool and necessary USB drivers installed. Step-by-Step Process
Enable Developer Options: Go to Settings > About Phone and tap "MIUI Version" seven times until you see the "You are now a developer" notification. Activate Unlock Settings: Go to Settings > Additional settings > Developer options. Enable OEM unlocking and USB debugging. Bind Account: In Developer options, tap Mi Unlock status.
Tap Add account and device. You should receive a "Successfully added" message.
Enter Fastboot Mode: Turn off the phone. Press and hold the Power and Volume Down buttons simultaneously until the Fastboot logo appears. Use Mi Unlock Tool on PC: Connect the phone to your PC via USB cable.
Launch the Mi Unlock Tool and sign in with the same Xiaomi account used on the phone.
Click Unlock. If it is your first attempt, the tool will typically show a countdown (often 168 hours or 7 days).
Complete the Unlock: Once the waiting period ends, return to Fastboot mode, connect to the PC, and run the tool again to finalize the process. Important Notes Boot Loader Lock Use Introduction FAQ - Xiaomi
Unlocking the bootloader of your REDMI Note 10 Pro Max is the essential first step toward full device customization, including installing custom ROMs (like Pixel Experience or LineageOS), rooting via Magisk, or flashing custom recoveries like TWRP. Essential Warnings & Prerequisites Before you begin, understand the implications:
Data Loss: This process factory resets your device. Back up all photos, contacts, and files.
Security & Warranty: Unlocking can reduce system security, disable some high-security apps (like some banking apps), and may void your official manufacturer warranty.
Waiting Period: Xiaomi typically requires a 168-hour (7-day) waiting period after binding your account. Preparation Checklist: A working Windows PC or laptop. The original high-quality USB data cable. An active Mi Account logged into your phone.
A SIM card with a working mobile data plan (Wi-Fi cannot be used for the binding process). Step 1: Enable Developer Options & Bind Your Account Open Settings > About Phone.
Tap on MIUI Version 7 times until it says, "You are now a developer!".
Go back to Settings > Additional Settings > Developer Options. Enable OEM Unlocking and USB Debugging. Tap Mi Unlock Status. Tap Add account and device.
Important: You must use mobile data for this step. Turn off Wi-Fi.
Wait for the "Added successfully" message. If you see an error, wait a few days and try again. Step 2: Set Up the PC & Mi Unlock Tool Xiaomihttps://www.mi.com Boot Loader Lock Use Introduction FAQ - Xiaomi
Unlocking the bootloader on your Redmi Note 10 Pro Max is a multi-step process that requires a PC, a valid Mi Account, and a waiting period. This process will erase all user data, so perform a full backup before starting. Prerequisites
Mi Account: Log in to your Mi Account on the device. The account must be active for at least 30 days.
PC & Tools: You need a Windows PC with the official Mi Unlock Tool and ADB & Fastboot drivers installed.
SIM Card: Use mobile data (not Wi-Fi) for the binding process. Step 1: Enable Developer Options & Binding Unlocking Redmi Note 13 4G Bootloader | by Martin Lwimiko
How to Unlock the Bootloader on Redmi Note 10 Pro Max (2026 Guide)
Unlocking the bootloader is the first step toward true ownership of your Redmi Note 10 Pro Max, allowing you to install custom ROMs, kernels, and advanced recovery tools like TWRP. However, Xiaomi's security policies have evolved significantly. As of 2026, the process requires specific account permissions and a mandatory waiting period. ⚠️ Essential Prerequisites
Before you start, understand that this process will erase all your data and may void your warranty.
Back Up Everything: Ensure all photos, contacts, and files are saved elsewhere.
Xiaomi Account: Your account must be active for at least 30 days.
SIM Card: A valid SIM with an active mobile data plan must be inserted (Wi-Fi cannot be used for the binding step).
Xiaomi Community App: You must use the Xiaomi Community App (version 5.3.31 or newer) to apply for unlocking permissions if your device is running newer HyperOS versions. Step 1: Apply for Unlocking Permission
Xiaomi now restricts bootloader unlocking to users who "contribute" to the community or meet specific criteria.
Open the Xiaomi Community App and set your region to Global. Go to the "Me" tab > Unlock Bootloader.
Tap Apply for Unlocking. Applications are often limited per day; for the best chance, try at 00:00 Beijing Time.
Once granted, your account is authorized to unlock up to 3 devices per year. Step 2: Bind Your Account to the Device
Unlocking the bootloader on a Redmi Note 10 Pro Max is a multi-step process that requires a Mi Account, a PC, and a mandatory waiting period. Important Prerequisites Backup Your Data : This process will erase all user data on your phone. : Ensure your device has at least 50% to 80% battery to prevent it from shutting down mid-process.
: You need the original USB-C data cable and an Intel-based PC. Connectivity : You must have a SIM card with an active mobile data plan; Wi-Fi must be turned off during the account binding step. Step 1: Prepare Your Device Enable Developer Options Settings > About phone and tap on MIUI Version 7 times until you see "You are now a developer". Enable Unlocking : Navigate to Settings > Additional settings > Developer options . Toggle on OEM unlocking USB debugging Bind Your Mi Account Turn off Wi-Fi and turn on Mobile Data Developer options Mi Unlock status Add account and device . You should see a "Added successfully" message. Step 2: Prepare Your PC Download the Tool : Download the official Mi Unlock Tool and extract the files. Install Drivers
: Run the driver installation tool found within the Mi Unlock folder to ensure your PC recognizes the phone in fastboot mode. : Open the miflash_unlock.exe and sign in with the same Mi Account currently linked to your phone. Step 3: Unlocking the Bootloader The sun had just set over the edge
Unlocking the bootloader on a Redmi Note 10 Pro Max requires enabling developer options, binding a Mi Account via mobile data, and using the Mi Unlock Tool on a PC, a process that erases all user data. Recent policies require 30-day account activity and, for HyperOS, a 14-day permission window, often with a 168-hour wait time. For more details, visit Xiaomi Community
0;1079;0;2cb; 0;d7;0;f1; 0;88;0;98; 0;279;0;17a; 0;1152;0;b19;
18;write_to_target_document19;_dV3tabmlE7SYseMP3uGhWQ_10;55;
18;write_to_target_document19;_dV3tabmlE7SYseMP3uGhWQ_20;55; 0;526;0;266;
Unlocking the bootloader on your Redmi Note 10 Pro Max is the first step toward installing custom ROMs, rooting, or trying out specialized recovery tools. This guide covers the official method using Xiaomi's Mi Unlock tool. 0;92;0;a3; 0;baf;0;d9; ⚠️ Important Considerations 0;52f;0;433;
Data Loss: This process will wipe all user data (photos, apps, messages).
Security: An unlocked bootloader is less secure if your phone is lost or stolen0;28b;.
Warranty: While unlocking is officially supported, some service centers may deny warranty claims for software-related issues caused by custom modifications. 0;ea;0;79;0;a3; 🛠️ Phase 1: Preparation (Phone Settings)
Before touching your PC, you must link your phone to a Xiaomi account. 0;265;0;466;
Sign in to Mi Account: Go to Settings > Mi Account and log in.
Enable Developer Options:0;403; Go to Settings > About Phone and tap MIUI Version 7 times until you see "You are now a developer".
Enable OEM Unlocking: Go to Settings > Additional Settings > Developer Options0;42b; and toggle on OEM Unlocking and USB Debugging.
Bind Account: In Developer Options, tap Mi Unlock Status0;403;. Tap Add account and device.
💡 Crucial: You must use mobile data (turn off Wi-Fi) for this step to succeed. 0;7a;0;a5; 💻 Phase 2: PC Setup 0;145;0;423;
Download Mi Unlock Tool: Get the official tool from the Xiaomi Unlock page0;ee;0;512;.
Install Drivers: Extract the tool and run the driver installation file (often MiUsbDriver.exe) inside the folder.
Login:0;13a; Open the Mi Unlock tool on your PC and log in with the same Mi Account used on your phone. 0;7a;0;a5; ⚡ Phase 3: The Unlocking Process
Fastboot Mode: Turn off your phone. Press and hold Volume Down + Power until the "Fastboot" logo appears.
Connect:0;485; Plug your phone into the PC using a high-quality USB cable.
Unlock: The Mi Unlock tool should show "Phone connected." Click Unlock.
The Waiting Period:0;4b8; Most users will see a message saying "Could not unlock, please wait 168 hours" (7 days).
Do not log out of your Mi account or factory reset your phone during this time, or the timer may reset.
Final Step:0;16a; After the wait time expires, repeat the process. Click Unlock anyway and your phone will reboot with an open lock icon on the boot screen. 0;7a;0;1c5;
🔓 Key Point: After unlocking, your device will reset. You will need to sign back into your Mi account and Google account to complete the initial setup. If you'd like to move forward, let me know:
Do you plan to install a specific Custom ROM (like LineageOS or Pixel Experience)? Are you looking to root the device0;236; with Magisk? Do you need help setting up ADB and Fastboot on your PC?
18;write_to_target_document7;default18;write_to_target_document19;_dV3tabmlE7SYseMP3uGhWQ_20;5035;0;4c5e;
18;write_to_target_document7;default0;a1;0;a1;18;write_to_target_document19;_dV3tabmlE7SYseMP3uGhWQ_20;a5; 0;f5;0;195;
18;write_to_target_document1a;_dV3tabmlE7SYseMP3uGhWQ_100;56; 0;a6a;0;5e8; 0;28c5;0;335c;
Review Summary: Unlocking the bootloader on the Redmi Note 10 Pro is a necessary step for anyone looking to install custom ROMs (like Pixel Experience or LineageOS), root their device, or install custom recoveries. However, it is not a simple "one-click" process. Xiaomi imposes a mandatory waiting period, and the process involves wiping your device completely.
fastboot oem device-info
(bootloader) Device unlocked: trueOr use:
fastboot getvar unlocked
Output: unlocked: yes.
Unlocking the Redmi Note 10 Pro is moderately difficult purely because of the 7-day waiting period imposed by Xiaomi. It is not technically complex, but it tests your patience.
Recommendation: If you are a casual user just wanting to remove a few ads, do not unlock the bootloader; it introduces more headaches (banking apps, safety nets) than it solves. If you are an enthusiast wanting to breathe new life into the phone with a Custom ROM or Root, the 7-day wait is worth it.
Disclaimer: Unlocking the bootloader voids your warranty and carries a risk of bricking your device if instructions are not followed correctly. Proceed at your own risk.
Disclaimer: Unlocking the bootloader will wipe all data on your device, voids the warranty (though Xiaomi allows it officially), and makes the device less secure. Proceed only if you understand the risks, including the potential for "hard bricking" your device.
Open command prompt (cmd) in your ADB/fastboot folder (Shift + Right-click → "Open PowerShell/Command window here"). Type:
fastboot devices
You should see a serial number + fastboot. If not, reinstall drivers.