Hexa 1210 User Manual Pdf - Homage

The Homage Hexa 1210 is a reliable Uninterruptible Power Supply (UPS) and inverter system widely used in Pakistan to provide backup power for essential household appliances. This 1000W system is designed to handle multiple devices simultaneously, making it a popular choice for managing frequent power outages. Core Specifications

The Hexa 1210 is engineered for efficiency and stability, featuring the following technical parameters:

Continuous Output Power: 1000W, capable of running lights, fans, and small electronics.

Peak Surge Power: 2000W to manage the initial startup load of motorized appliances like refrigerators.

Battery Voltage: Operates on a 12V DC system, typically requiring a single 12V deep-cycle battery.

Waveform: Provides a Pure Sine Wave output, which is safer for sensitive electronics like LED TVs and computers compared to modified sine waves. Installation and Setup Guide

To ensure the longevity of your Homage Hexa 1210, follow these standard installation steps:

Placement: Install the unit in a well-ventilated, dry area away from direct sunlight.

Battery Connection: Connect the 12V battery cables carefully. Ensure the red cable is on the positive (+) terminal and the black cable is on the negative (-) terminal. Selector Settings:

Narrow Mode: Use this for sensitive equipment like computers to ensure seamless switching during power cuts.

Wide Mode: Recommended for non-sensitive loads (bulbs/fans) as it allows the unit to operate under broader input voltage fluctuations.

Monitoring: Some models allow PC monitoring via a serial cable and "WatchPower" software for real-time performance tracking. Common Fault Codes and Troubleshooting

If your Hexa 1210 displays an error code on its LED/LCD, refer to the following table for quick diagnostics: Fault Code Potential Solution Fault 0 Internal output repair needed Contact a service center for PCB inspection. Fault 3 Battery/Relay issue homage hexa 1210 user manual pdf

Check for loose battery connections or faulty internal relays. Fault 6 Reduce the number of connected appliances immediately. Fault 18 Charging Problem

Often an internal charging circuit failure; requires professional repair. Maintenance Tips

Battery Replacement: Standard lead-acid batteries should be replaced every 3–5 years for optimal performance.

Terminal Cleaning: Keep battery terminals clean of corrosion using a mixture of baking soda and water to ensure efficient charging.

Ventilation: Regularly check that the internal cooling fan is running and not blocked by dust. Homage Ups Setting (In Urdu)

operates as an Uninterruptible Power Supply (UPS) that automatically switches to battery power during outages. Capacity: 1200VA / 1000 Watts.

Battery Voltage: 12V DC (Requires one 12V battery, ideally 150Ah–200Ah for best performance).

Charging Current: Typically supports 10A or 20A selectable charging current to suit different battery sizes.

Input Voltage Range: Selectable between "Narrow" (170-280VAC) for computers and "Wide" (90-280VAC) for home appliances. 2. Control Panel & Operation

The unit features an LCD screen and basic controls to manage its operation mode:

Power Switch: Main ON/OFF button located on the front panel.

LCD Display: Shows input/output voltage, battery level, load percentage, and operation mode (Line vs. Battery). Selector Switches: The Homage Hexa 1210 is a reliable Uninterruptible

Narrow/Wide: Use Narrow for sensitive electronics like PCs or LCD TVs to ensure they don't restart during voltage fluctuations. Use Wide for fans and lights to allow the unit to run even when the grid voltage is low.

Battery Type: Select based on your battery (Deep Cycle, Sealed Lead Acid, or Gel). 3. Installation Steps

Placement: Place the unit in a well-ventilated, dry area. Avoid direct sunlight.

Battery Connection: Connect the RED cable to the positive (+) terminal and the BLACK cable to the negative (-) terminal of a 12V battery. Ensure connections are tight to prevent sparking.

AC Input: Plug the unit's power cord into a grounded AC wall outlet.

Load Connection: Connect your appliances (fans, lights, TVs) to the output sockets on the rear panel. 4. Troubleshooting & Fault Codes

If the inverter encounters an issue, it will display a fault icon and a numeric code. Fault Code Potential Solution 01 Check if the fan is blocked or disconnected. 02 Over Temperature Ensure the unit has enough ventilation; reduce load. 03 Battery Overcharged Disconnect battery and check charging settings. 05 Output Short Circuit Disconnect all loads and check for wiring shorts. 07 Overload Warning Total load exceeds 1000W. Reduce the number of appliances. 08 Output Voltage High Internal fault; requires professional repair. 5. Safety Maintenance

Battery Care: Regularly check water levels in lead-acid batteries and clean terminal corrosion with a wire brush. Fuse Protection: The

includes built-in circuit breakers and fuses. If the unit does not turn on during AC mode, check the rear circuit breaker.

For a visual walkthrough of settings, you can refer to video guides from creators like Electronic ABC on YouTube or official support documents on Scribd .

Homage Hexa 1210 is a versatile 12V DC solar-charging UPS and inverter designed for residential and small office use, offering a maximum power capacity of approximately 900W to 1000W

. As a "Hexa" series model, it typically features a sleek design with a multi-functional LCD that provides real-time data on battery status, load levels, and input/output voltages. Core Technical Features Fan not starting → Check capacitor or remote batteries

is engineered for efficiency and user convenience, often incorporating the following specifications: Power Output:

Provides roughly 1000W of continuous power, suitable for running multiple household appliances like fans, energy savers, and small electronics. Voltage System: Operates on a standard

battery system, making it compatible with most lead-acid and lithium batteries. Pure Sine Wave:

Many models in this range utilize pure sine wave technology to ensure clean power delivery, which is essential for sensitive electronic equipment. Solar Integration:

Specifically designed for solar charging, allowing users to connect PV modules for renewable energy backup during daylight hours. Operational & Safety Features

According to typical user manual guidelines for the Homage series: Automatic Operation:

The unit features automatic load detection and auto-restart capabilities, transitioning seamlessly between utility power and battery backup during outages. Protection Mechanisms: Integrated safeguards protect against common issues such as overloading overheating , low/high voltage, and short circuits. Smart Display: The LCD facilitates troubleshooting by displaying specific fault codes

(e.g., Fault 0 for general errors or Fault 3/5 for charging issues), which are critical for diagnostic repairs. Maintenance & Troubleshooting

To maintain the lifespan of the inverter—which typically ranges from 10 to 15 years for string-style residential units—it should be placed in a well-ventilated area

away from direct sunlight. Users frequently refer to the manual for specific fault code meanings to resolve charging failures or "no output" problems without professional intervention.

Because manufacturers frequently update their websites and direct PDF links can break, I have found the official source where you can download the document directly.

Section 5: Troubleshooting Table

A quick-reference chart for issues like:

  • Fan not starting → Check capacitor or remote batteries.
  • Remote not working → Re-pair or replace batteries.
  • Unusual clicking noise → Tighten blade screws.

3. Clarity of Instructions (⭐⭐⭐☆☆ – 3/5)

Installation Section (Page 8–13):

  • Terminal labeling (Battery +/-, AC input, AC output) is clear with large diagrams.
  • Wire gauge recommendations: Provided in AWG and mm², but the font is small (6pt) – difficult to read on a phone screen.
  • Missing: No step-by-step “first-time power-on sequence” (e.g., connect battery first, then AC, then loads). A novice could damage the unit.

Operation Modes:

  • UPS mode vs. Inverter mode explained well with a simple flow chart.
  • However, the LCD display codes are buried on page 17, forcing constant page flipping.

2. Document Structure (⭐⭐⭐☆☆ – 3/5)

  • Length: 24 pages (including covers and warranty card).
  • Sections: Safety warnings, features overview, front/back panel diagrams, installation, operation modes, troubleshooting, specifications, warranty.
  • The good: Table of contents is clickable in the PDF.
  • The bad: Page numbers are inconsistent (e.g., installation instructions start on page 9 but references in TOC point to page 7).
Elizabeth Harrin wearing a pink scarf

Project manager, author, mentor

Elizabeth Harrin is a Fellow of the Association for Project Management in the UK. She holds degrees from the University of York and Roehampton University, and several project management certifications including APM PMQ. She first took her PRINCE2 Practitioner exam in 2004 and has worked extensively in project delivery for over 20 years.
Elizabeth is also the founder of the Project Management Rebels community, a mentoring group for professionals. She's written several books for project managers including Managing Multiple Projects.