To reset the password for a Hi Sharp DVR , use the following methods depending on your access level and model. 1. Use the Default Credentials
If this is the first time you are setting up the device, try the factory default credentials: www.hisharp.com 2. Physical Hard Reset (Motherboard)
For many older or standard Hi Sharp models, you can perform a hardware reset by interacting with the internal components: Internal Reset Button
: Open the DVR casing and look for a small push button on the motherboard. With the power on, press and hold this button for 10–30 seconds until the unit beeps or restarts. Battery Removal : Some users report success by removing the internal CMOS coin battery
for at least 30 seconds while the unit is powered off. This may clear the volatile memory holding the password. 3. Software & Dynamic Password Reset
If physical methods aren't available, use software tools to generate a temporary recovery key: Hi Sharp IP Finder : Download the Hi Sharp IP Finder software
to your PC. If the device is on your local network, you may be able to access recovery options through this tool. Dynamic Password : Click on "Retrieve Password" "Forgot Password"
on the DVR login screen. If it displays a "Dynamic Password" prompt or a QR code, you typically need to contact Hi Sharp Technical Support
with the displayed serial number or date to receive a one-day master code. Security Questions : If previously configured, select the "Edit Security Question"
option at login to reset the admin password by answering your pre-set questions. www.hisharp.com 4. Remote App Reset If your DVR is linked to a mobile application: How to Reset DVR Password
Modern Hi Sharp units have a built-in recovery tool on the login screen. Step 1: Go to the DVR login interface on your monitor. Step 2: Click on "Forgot Password" or "Retrieve Password". Step 3: Navigate to the "Dynamic Code" page. Step 4: Take a clear photo or screenshot of this page.
Step 5: Send this photo, along with your Model Number and Serial Number, to sales@hisharp.com.tw or your local distributor [0.5.3]. 2. Default Credentials
If the DVR was recently factory reset or is brand new, try the factory defaults: Username: admin Password: 123456 [0.5.7] hi sharp dvr reset password new
Other common defaults: 000000, 111111, or leave the password field blank. 3. Physical Hardware Reset (Last Resort)
If software methods fail, you may need to access the motherboard.
Battery Removal: Power off the DVR and remove the CMOS battery (the small silver coin-shaped battery) for 5–10 minutes. This often resets the system clock and may revert the password to default [0.5.11, 0.5.14].
Reset Button: Check the motherboard for a small physical button labeled "Reset" or "RST". Hold it down for 15 seconds while powering the device back on [0.5.5, 0.5.13]. 📋 Information You Will Need
Before contacting support, have these details ready from the sticker on the bottom of the device: Model Number (e.g., HS-HF6321) Serial Number (S/N) Device Date (The current date shown on the DVR's screen)
What is the specific Model Number on the bottom of the unit?
Do you see a QR code or a Dynamic Code page when you click "Forgot Password"? Is the DVR currently connected to the internet?
I can provide more tailored steps or help you find the specific Hi Sharp Support contact for your region.
If you are locked out of your Hi Sharp DVR or security system, the reset process depends on your specific model and the software version it’s running. As of April 2026, most new Hi Sharp systems utilize "dynamic codes" or QR-based recovery rather than universal master passwords. 1. Use the "Dynamic Code" Method (Newer Models)
For most modern Hi Sharp units, you can generate a temporary code through their official support channels:
Step 1: Go to the DVR's login screen and click "Forget Password" or "Retrieve Password".
Step 2: Look for a button or tab labeled "Dynamic Code". This will generate a unique code or QR code on your monitor. To reset the password for a Hi Sharp
Step 3: Take a photo or screenshot of this screen and send it to sales@hisharp.com.tw or your regional distributor. Include your device's model number and serial number.
Step 4: They will provide a temporary password. Once you log in, go to Settings > User to set a permanent new password immediately. 2. Common Default Passwords (Legacy Models)
If your device is older or hasn't been set up yet, try these factory defaults (Username is almost always admin): 12345 or 123456 000000 or 0000 admin Leave the password field blank. 3. Physical Hardware Reset
If software methods fail, you can perform a factory reset via the motherboard:
External Reset: Check the back or bottom for a pinhole labeled "Reset." Press and hold with a paperclip for 10–30 seconds while the device is powered on until you hear a beep.
Internal Jumper (Advanced): Power off the unit and open the case. Look for two metal pins labeled "J1" or "G1" (jumpers). Use a screwdriver or tweezers to bridge (connect) these two pins, then power the device on. Hold the bridge for 30–60 seconds to wipe the admin credentials. Troubleshooting Tips
Resetting Password of DVR/NVR by Scanning QR Code - Hik-Connect
To reset your Hi Sharp DVR password, follow these steps to regain access to your security system. 🛠️ Quick Recovery Options
If you are locked out, try these common default credentials first: Username: admin Password: admin, 123456, or simply leave it blank Formal Password Reset
If defaults don't work, Hi Sharp recommends a formal reset process to maintain security:
Get the Dynamic Code: On the login screen, click "Forget Password" or "Retrieve Password." Navigate to the "Dynamic Code" page.
Contact Support: Take a clear photo or screenshot of the dynamic code page. Why Does the Hi Sharp DVR Lock Out
Email Details: Send the photo along with your model number and serial number to sales@hisharp.com.tw.
Enter New Code: Support will provide a temporary code to unlock the unit, allowing you to set a new password. ⚡ Hard Reset Methods (Last Resort)
If you cannot wait for an email response, you can perform a factory reset: Physical Reset Button
Locate the Button: Look for a small pinhole or button labeled "Reset" on the back or bottom of the DVR.
Hold to Reset: While the device is powered on, press and hold the button for 10–30 seconds. You should hear a beep indicating the reset was successful. Internal Jumper Method Open the Case: Power off the DVR and remove the top cover.
Short the Pins: Locate two metal pins labeled J1 or G1 on the motherboard. Use tweezers to connect them, then power the device on for 7–10 seconds until you hear a long beep. To help you faster, could you tell me:
What is the exact model number? (usually found on a sticker underneath) Do you see a "Forgot Password" link on your login screen?
I can provide more specific instructions for your exact hardware version. How to Reset a NVR Without Password: Easy Guide - eufy US
Hi Sharp DVRs (Digital Video Recorders) are popular budget-to-mid-range security recorders. They use a three-tier security system:
admin / 123456 or blank).If you bought a used DVR, inherited a security system, or simply haven't logged in since installation, you will need a "hi sharp dvr reset password new" procedure.
If you have Hi Sharp CMS (Central Management System) installed on a PC and the DVR was added before:
