English
For partners

Gamepad V13 Wireless Controller Install

To install and connect the Megadream V013 Mobile Wireless Gamepad, you must enter the correct pairing mode for your specific device. The controller uses different button combinations to simulate various controller types (like Xbox or PlayStation) for maximum compatibility. Pairing Modes by Device

Before starting, ensure your gamepad is charged using a 5V charger and the included micro USB cable. iOS (iPhone/iPad) Requirements: iOS 13.4 or later.

Method: Press and hold B + Home for 2 seconds. The LED 4 light will flash quickly.

Action: In your device's Bluetooth settings, select "DUALSHOCK 4 Wireless Controller". Android (Phone/Tablet/TV Box)

Standard Mode: Press and hold X + Home for 2 seconds. The LED 3 light will flash. In Bluetooth settings, select "V013".

Advanced Game Mode (COD/Apex): Press and hold R1 + Home. This makes the controller appear as an "Xbox Wireless Controller" for better native support in modern games. Windows PC

Wireless: You can use the Microsoft Windows Bluetooth Settings to add the device. Press and hold R1 + Home to pair it as an Xbox controller for the best compatibility with Windows games.

Wired: Connect via USB cable while holding the R3 button to enter X-Input mode. Installation Steps gamepad v13 wireless controller install

To install and pair your Gamepad V13 wireless controller , use the following button combinations to enter pairing mode based on your device. Pairing by Device Type Android Devices Press and hold for 2 seconds until the light flashes quickly. Alternatively, try for 3 seconds until Search for Gamepad plus V3 in your phone's Bluetooth settings to connect. iOS (iPhone/iPad) Press and hold for 2 seconds until the light flashes. In Bluetooth settings, select DUALSHOCK 4 Wireless Controller AssistiveTouch

is turned on in your iPhone settings for the controller to function properly. Press and hold while the controller is off until the light blinks. Xbox Wireless Controller from your PC's Bluetooth "Add device" menu. Essential Software ShootingPlus V3

: This app is often required for mapping controller functions to specific mobile games. Octopus App

: A popular alternative for pairing and automatically configuring button layouts for various mobile titles. Troubleshooting : If the controller won't connect, hold the Sync/Reset

button (usually on the back or top) for 15 seconds to clear previous pairings. No Drivers Needed

is typically a plug-and-play Bluetooth device and does not require manual driver installation on most modern operating systems Jumia Nigeria Connect Your Controller for Gaming | Microsoft Windows

To install and set up your Gamepad V13 wireless controller, you need to use specific button combinations to enter pairing mode based on whether you are using a PC, Android, or iOS device. 1. Pairing Mode Button Combinations To install and connect the Megadream V013 Mobile

Before searching for the device on your computer or phone, ensure the controller is OFF, then hold the following buttons for 2 seconds until the indicator lights flash rapidly: Button Combination Pairing Name to Look For Android X + Home V013 or Gamepad plus V3 iOS (iPhone/iPad) B + Home DUALSHOCK 4 Wireless Controller PC (Windows) R1 + Home Xbox Wireless Controller 2. Installation on Windows PC (Windows 10/11)

Most modern Windows systems will automatically install the necessary drivers once the controller is connected. Wireless Connection: Hold R1 + Home until the LEDs flash quickly.

Open Settings > Bluetooth & devices and ensure Bluetooth is toggled ON.

Select Add device > Bluetooth and click on Xbox Wireless Controller.

Wired Connection: Plug the controller into a USB port using a compatible cable. Windows will typically detect it and install drivers automatically.

Calibration: Once connected, you can search for "Set up USB game controllers" in the Windows search bar to test and calibrate your buttons. 3. Installation on Android & iOS

Android: Ensure your system is version 6.0 or higher. After pairing using X + Home, the LED 3 light will stay solid. For games like Call of Duty or Apex Legends, some users recommend pairing as an "Xbox Wireless Controller" using R1 + Home for better compatibility. For macOS

iOS: Requires iOS 13.4 or later. If the controller pairs but doesn't work, Apple users should ensure AssistiveTouch is enabled in Accessibility settings. 4. Essential Software & Apps

For games that do not natively support controllers, you may need a key-mapping application:

The Ultimate Guide to Gamepad V13 Wireless Controller Install: From Unboxing to Mastery

The Gamepad V13 Wireless Controller has quickly become a fan favorite among budget-conscious gamers who refuse to compromise on quality. Known for its ergonomic design, hall-effect sensing joysticks (on newer models), and multi-platform compatibility, the V13 is a powerhouse. However, even the best hardware is useless if you can’t get it connected.

Whether you are a PC gamer on Steam, a Nintendo Switch enthusiast, or an Android mobile player, this guide will walk you through every nuance of the gamepad v13 wireless controller install process. By the end of this article, you’ll go from a frustrated beginner to a connectivity expert.

For macOS

  1. Download and Install Drivers
    • Go to the official Gamepad website and download the latest drivers for macOS.
    • Run the installer and follow the on-screen instructions to complete the installation.
  2. Connect the Wireless Receiver
    • Plug the wireless receiver into an available USB port on your Mac.
    • Wait for the receiver to be recognized by your Mac.
  3. Pair the Controller
    • Turn on the Gamepad v13 Wireless Controller by pressing and holding the power button.
    • Press and hold the pairing button on the receiver until the LED light starts flashing.
    • Release the pairing button and wait for the controller to connect to the receiver.

Android (Best for Call of Duty Mobile, Genshin Impact)

  1. Go to Settings > Connected Devices > Pair New Device.
  2. On the V13, press Home + B for 3 seconds (Android mode).
  3. Select "Gamepad V13" from the list.
  4. Open your game. Note: For non-native games, use apps like "Panda Gamepad Pro" to map touch controls.

Part 5: Mobile and Tablet Installation (Android & iOS)

3. Wireless connection methods

iOS (iPhone/iPad)

Warning: The V13 is not MFi (Made for iPhone) certified. It works for MFI-compatible games (like Call of Duty Mobile) but not for Apple Arcade titles consistently.

  1. On the V13, press Home + A for 3 seconds.
  2. On your iPhone, go to Settings > Bluetooth. Look for "DualSense Wireless Controller" (the V13 mimics this). Tap to pair.
  3. Test in a game like CODM under controller settings.

6. Troubleshooting deep issues

| Problem | Likely fix | |---------|-------------| | Won’t pair via BT | Forget device on PC/phone, reset controller (small hole on back with paperclip). | | Works in menus but not games | Game may need X-input mode. Toggle switch on back. | | LED flashes but no connection | Dongle out of range → use USB extension cable. | | Stick drift | Recalibrate in OS; clean sticks with compressed air. | | No rumble | Check game settings, driver properties → enable vibration. |

A. 2.4G via USB dongle (low latency, PC / Switch dock)

  1. Plug dongle into USB port on PC, Switch dock, or PS4/PS5 (limited support).
  2. Turn on controller → It should auto-pair if dongle is pre-linked.
  3. If not working:
    • Insert paperclip into tiny pairing hole on dongle for 3 sec.
    • On controller, hold Home + X (or Home + Y) for 3 sec until LEDs fast blink.
    • Wait for solid LED → paired.
Напишите нам, мы онлайн!