Firmware Reset Samsung Ml 2160 2165 2160w 2165w Link Extra Quality May 2026

Resetting the firmware on your Samsung ML-2160 , Go to product viewer dialog for this item. ,

, or 2165W allows you to use refilled toner cartridges without the printer blocking them due to an "empty" chip. This process involves applying a patched firmware fix that resets the page counter to 100% every time the printer restarts. Prerequisites for Firmware Reset

Before applying any fix, you must identify your specific printer details by printing two reports:

Configuration Report: Hold the Print Screen / WPS button for about 10 seconds until the LED flashes once. This report contains your Serial Number and Firmware Version.

Supplies Information: Hold the same button for about 15 seconds until the LED stays green. This report lists the CRUM series number, which is a unique 11-digit identifier for your cartridge chip. Step-by-Step Reset Procedure

Once you have obtained the appropriate firmware fix file for your CRUM and version:

Enter Download Mode: Turn the printer off. Press and hold the Print Screen button, then press and hold Power. Release both after a few seconds. Connect and Flash: Connect your printer to your PC via USB.

Run the Fix: Drag and drop the downloaded .hd firmware file onto the usbprns2.exe application provided in your reset package.

Reboot: The printer will program for 1–2 minutes and then automatically restart.

Disable the Chip: Once finished, you must remove or cover the toner chip with tape so the printer ignores the hardware counter and relies on the new firmware. Essential Resource Links

Custom Firmware Fixes: You can find specific firmware archives and custom reset services at ORPYS or through technical guides provided by eReset

Service & Troubleshooting: For deep technical resets or hardware issues, refer to the Elektrotanya Service Manual

or seek expert advice from community forums like JustAnswer.

This report outlines the procedure for performing a firmware reset on Samsung ML-2160, ML-2165, and their wireless (W) variants. Note that "resetting" in this context typically refers to either a factory reset to clear settings or a firmware "fix" to allow printing without toner chips. 1. Pre-Reset: Identifying Firmware Details

Before applying any firmware modifications, you must identify your current firmware version and CRUM number.

Configuration Report: Hold the Print Screen / WPS button for ~10 seconds until the LED flashes once, then release. This prints the Serial Number and Firmware Version.

Supplies Information: Hold the Print Screen / WPS button for ~15 seconds until the LED stays solid green, then release. This prints the CRUM series number. 2. Firmware Reset Procedures

Depending on your goal (factory reset vs. chip-less printing), follow the relevant method below: Method A: Soft/Factory Reset (General Malfunctions) To clear memory and internal errors:

Button Method: Turn on the device and hold the Stop/Cancel button for 10–15 seconds until the LEDs flash, then restart.

Menu Method (if applicable): Navigate to Menu > System > Factory Settings. Method B: Firmware "Fix" (Chip-less Printing)

Third-party "fixes" are often used to bypass toner chip requirements. Use these with caution as they may void warranties.

Enter Download Mode: Turn off the printer. Hold the Print Screen (or WPS) button while turning the power back on. Release after ~3 seconds once the LED turns green.

Flash Firmware: Connect to a PC via USB. Drag and drop the specific .hd firmware file onto the usbprns2.exe utility.

Completion: The printer will flash and reboot. You must then remove or cover the toner chip with tape for the reset to take effect. 3. Essential Resources & Links firmware reset samsung ml 2160 2165 2160w 2165w link

Official Support: Visit Samsung ML-2165W Setup (HP Support) for official manuals and drivers. Detailed Guides: eReset Guide for identifying firmware versions.

ORPYS ML-2160 Firmware for specific file-handling instructions. Video Tutorials: How to print reports for Samsung ML-2160/2165.

Warning: Interrupting a firmware update (e.g., power loss) can permanently corrupt the printer's firmware. Always use a stable power source or UPS during the process. Firmware Reset Samsung Ml 2165wbfdcm - Facebook

For users of the Samsung ML-2160 Go to product viewer dialog for this item.

, a "firmware reset" can refer to two different things: a standard factory reset to clear settings or a "Fix Firmware" reset used to bypass toner chip restrictions. 1. Standard Factory Reset

A factory reset is used to clear network settings or minor software errors. Because these models lack a full display screen, you must use physical button combinations or the HP Support Portal (which now manages Samsung printers) to download diagnostic tools. Reset Procedure: Ensure the printer is powered on and in "Ready" mode.

Press and hold the Stop/Cancel button (or Print Screen/WPS button on "W" models) for approximately 10–15 seconds until the LEDs flash rapidly. Release the button and wait for the printer to reboot. Network Reset (

): To clear only wireless settings, press the WPS button on the control panel for 2-4 seconds until the status LED blinks quickly, or use the Samsung Printer Diagnostics software to restore network defaults. 2. Firmware "Fix" Reset (Bypassing Toner Chips)

Many users seek a firmware reset to allow the use of refilled cartridges or to disable the "Toner Empty" message. This requires installing a modified "Fix Firmware" that makes the printer ignore the CRUM (toner chip) serial number.

Step 1: Enter Download Mode: With the printer OFF, press and hold the Print Screen/WPS button, then press and hold Power. Release both after a few seconds when the LEDs indicate "forced mode".

Step 2: Apply the Fix: Modified firmware files (often named with .hd or .exe extensions) are typically dragged and dropped onto a USBPRNS2.exe application while the printer is connected via USB.

Step 3: Hardware Modification: Once the firmware is updated, you must remove or cover the metal chip on the toner cartridge with tape so the printer can no longer detect it.

The following tutorials demonstrate how to perform both standard resets and custom firmware updates for these models:

Firmware resets for Samsung ML-2160/2165 series printers involve either applying third-party "fix" firmware to bypass toner chip requirements or performing a factory reset to clear errors. Custom fix files, which require specific printer details, are available through providers like eReset. For official, standard firmware, you can visit the HP Support site.

Topic: How to Perform a Firmware / EEPROM Reset on Samsung ML-2160, ML-2165, ML-2160W, ML-2165W

Applies to:
Samsung ML-2160 / ML-2165 / ML-2160W / ML-2165W

Issue:
Printer displays "Replace toner" or "Toner empty" even with a non-genuine or refilled cartridge. Sometimes a firmware downgrade or reset is required to clear non-volatile memory (EEPROM) errors.

Important Notes:

• This reset clears stored toner level data, paper jam history, and certain service counters.
• For toner issues, first try: Menu → # → 1934 (quick enter) → New Cartridge → Select Yes (works on older firmware).
• If that fails, proceed with the firmware/EEPROM reset below.

Method 1 – Full EEPROM Reset (Service Mode)

1. Turn the printer off.
2. Press and hold the Cancel (Stop) button and the Power button simultaneously.
3. Keep holding Cancel, release Power for 1 second, then press Power again (still holding Cancel). Wait until all LEDs flash once.
4. Release Cancel. The printer enters Service Mode (all LEDs blink slowly).
5. Press the Cancel button 5 times quickly. The printer will reset EEPROM to factory defaults.
6. Press Power to turn off. Wait 10 seconds, then turn on normally.

Method 2 – Downgrade Firmware (for locked "Non-Samsung Toner" error)

If a newer firmware blocks third-party toner, you must downgrade:

1. Download older firmware (version V3.00.01.17 or earlier – search for ML-2160 Series_V3.00.01.17.exe).
2. Connect printer via USB only (Wi-Fi off for W models).
3. Run the firmware exe as administrator.
4. Follow on-screen instructions. Do not power off during flash.
5. After downgrade, the printer accepts the "New Cartridge" command again.

Link to official firmware page (archive):

[Samsung ML-2160 Series Support Page (archived)]
Note: Samsung no longer hosts these files. Use trusted archive.org or driver collection sites.
Direct alternative search: Samsung ML-2160 firmware download Resetting the firmware on your Samsung ML-2160 ,

Final step after any reset:
Menu → # → 1934 → Menu → New Cartridge → Yes → Power cycle.

Disclaimer: Resetting firmware/EEPROM may void any remaining warranty. Use at your own risk. Always keep a working copy of your current firmware before downgrading.

This review evaluates the firmware reset fix for the Samsung ML-2160, ML-2165, ML-2160W, and ML-2165W series, a popular modification designed to bypass toner chip restrictions. Overview

The firmware reset (often called "Fix Firmware") is a software modification that allows these printers to operate without the electronic chips found on Samsung MLT-D101S cartridges. By removing this restriction, users can refill existing cartridges or use cheaper compatible toners that lack a chip. Key Features & Benefits

Cost Savings: Effectively reduces printing costs by up to 50–60% by allowing for simple toner refills instead of purchasing expensive new chipped cartridges.

Chip Independence: Once installed, you can remove the chip entirely or cover it with tape; the printer will permanently report toner levels at 100%.

Starter Cartridge Support: Allows you to refill and continue using the "starter" cartridge that originally came with the printer.

Reversible: Many providers offer the original firmware alongside the fix, allowing you to return the printer to its factory state if needed for warranty purposes. Installation Process The process typically involves a few technical steps:

Report Printing: Hold the Print Screen/WPS button (about 10–15 seconds) to print the Configuration and Supplies Information reports.

Information Gathering: You must provide the printer's Serial Number, Firmware Version, and CRUM number to the firmware provider to generate a unique fix file.

Flashing: Connect the printer via USB and drag the provided .hd fix file onto a specialized executable (like usbprns2.exe).

Hardware Modification: After the printer reboots, you must remove or tape over the chip on the toner cartridge. Potential Risks Samsung ML-2160 Firmware - ORPYS

The "full story" behind firmware resets for the Samsung ML-2160, ML-2165, and their wireless "W" counterparts is a long-standing battle between printer owners and manufacturer-imposed cartridge locking systems. The Conflict: Toner Chips vs. Refills These printers use

cartridges, which come equipped with a "CRUM" chip. This chip acts as a counter; once the printer decides the cartridge is "empty," it locks the device, even if there is still physical toner left. Users found that even refilling the toner manually wouldn't work because the chip remained "locked". The "Fix" Movement

To bypass these costs, a community developed "Fix Firmware" (often called "Resoft" or "Reset Fix"). This modified software is designed to: Permanently Reset Counters

: The printer sees the toner level as 100% every time it starts up. Eliminate Chips

: After the fix, users can remove or tape over the cartridge chip and print using only refilled toner. The Technical Evolution

The story evolved as Samsung released newer, more secure firmware versions:

This procedure is useful for troubleshooting issues such as:

• Persistent error lights (toner, paper jam, or status lights blinking abnormally).
• The printer not recognizing a new, genuine, or refilled toner cartridge.
• Network/Wi-Fi connectivity problems (especially on the “W” models).
• Configuration settings that you cannot otherwise clear.

Step 4: Monitor the Flashing Process

• The printer’s LED will blink green/red alternately.
• A progress bar on your PC will reach 100%. This takes 3–5 minutes.
• Do not touch the printer or PC. Do not close the window.

Step 2: Disable Automatic Firmware Updates (Very Important)

If your printer is connected to the internet, it might auto-update again. To prevent this:

• For ML-2160W / ML-2165W: Log into the printer’s web interface (find its IP via settings), go to “Firmware Update” and disable “Auto Update.”
• Block the printer’s MAC address from accessing the internet via your router.

Q4: Can I use the same reset file for ML-2160 and ML-2165?

A: Yes. The firmware is identical for base and wireless models. The installer auto-detects the hardware.

Step 5: Completion

• The utility will show “Firmware update completed successfully.”
• The printer will reboot automatically.
• Print a configuration page: Press and hold the Cancel button for about 10 seconds.

Final Thoughts

Pros:

• Saves you from buying a new printer.
• Allows you to use cheap refilled toner cartridges indefinitely.
• High success rate if the firmware version matches.

Cons:

• High technical barrier (drivers, disabling antivirus, or soldering).
• Risk of "bricking" the printer if the wrong version is used.
• Support is usually non-existent (you are on your own if it fails).

Recommendation: If you are technically inclined and have verified your printer's current firmware version matches the reset tool's requirements, this is a highly recommended purchase. It turns a paperweight back into a working machine. However, if you are uncomfortable with computer drivers or hardware tinkering, it may be safer to simply buy a new printer.

For the Samsung ML-2160 and series (including wireless 'W' models), firmware resets are typically used to enable "chipless" printing, allowing you to refill toner cartridges without replacing the expensive electronic chips. Official firmware updates are now managed by HP following their acquisition of Samsung's printer division.  Firmware Reset Procedure 

To perform a firmware reset, you generally need to put the printer into Download Mode and then apply a "fix" file. 

Identify Your Details: Most reset fixes require your printer's Serial Number, Firmware Version, and CRUM number.

Configuration Report: Hold the Print Screen/WPS button for about 10 seconds until the LED flashes once, then release.

Supplies Information: Hold the same button for about 15 seconds until the LED stays green, then release.

Enter Download Mode: Turn the printer off. Hold the Stop/Clear or Print Screen button while turning the power back on. The LED should turn green or orange, indicating it is ready for data.

Apply the Fix: Connect the printer via USB and drag the firmware fix file (usually a .hd file) onto the update executable (like usbprns2.exe).

Finalize: Once the printer reboots, you must remove or cover the chip on the toner cartridge with tape for the reset to take effect.  Essential Resources & Links 

Official Drivers & Firmware: The official repository for standard updates is now hosted on HP Support.

Third-Party Reset Tools: While not official, sites like eReset and ORPYS provide custom "chipless" firmware fixes and detailed video tutorials.

Technical Guides: Detailed PDF release notes and manual update instructions can be found on Scribd. 

Caution: Using non-official "fix" firmware can void your warranty and, if interrupted, may render the printer unusable ("bricking"). Ensure you have a stable power connection before proceeding. 

Guide to Firmware Reset for Samsung ML-2160 and ML-2165 Series

The Samsung ML-2160 and ML-2165 series printers are compact and efficient, but they often encounter a common roadblock: the toner chip counter. These printers use chips on the toner cartridges to track page counts. Once a pre-set limit is reached, the printer may stop functioning and display "Toner Empty" or "Invalid Toner" errors—even if there is still physical toner left in the cartridge.

A firmware reset (or "fix firmware") allows you to bypass this chip, enabling the use of refilled cartridges or third-party toner without a chip. 1. Identify Your Printer Information

Before performing a reset, you must know your specific printer details. Firmware fixes are often tied to the unique identifiers of your machine. Model Number: (e.g., ML-2160, ML-2165W).

Firmware Version: Crucial for choosing the correct fix file.

Serial Number: Found on the back of the printer or in reports.

CRUM Number: The unique ID of the toner chip currently installed. How to Print Reports

Configuration Report: While in standby, hold the Print Screen (or WPS for "W" models) button for about 10 seconds until the LED flashes once, then release.

Supplies Information (CRUM): Hold the same button for approximately 15 seconds until the LED stays solid green, then release. 2. The Firmware Reset Process

The reset involves flashing a modified firmware file (often called a "FIX" file) to the printer. Topic: How to Perform a Firmware / EEPROM