Shelfstock

Planograms and Category Managment

Epsonsx130reset Adjustment Program Upd ^new^ May 2026

To reset your Epson Stylus SX130 Go to product viewer dialog for this item.

using an adjustment program, you typically need to address the "Waste Ink Pad" counter, which causes the printer to stop working once it reaches its internal limit. Resetting the Waste Ink Counter

There are two primary ways to perform this reset: using a specific model-based Adjustment Program or the widely compatible WIC Reset Utility. Method 1: Using a Dedicated Adjustment Program

This is model-specific software used by technicians to reset internal counters.

3. When Should You Use the Reset Adjustment Program?

Do not run this program preventatively. Use it only when: epsonsx130reset adjustment program upd

  1. Your Epson SX130 displays the “Service Required” error message.
  2. The printer’s power and error lights flash alternately.
  3. The printer refuses to print, copy, or scan despite having full ink cartridges.

Important warning: Resetting the counter without physically cleaning or replacing the waste ink pad can lead to ink overflow, damaging your desk, electronics, or printer’s power supply. We strongly recommend addressing the physical pad (see Section 7 below).

Recommended legal alternatives

  • Replace waste ink pads – If you're technical, you can buy replacement pads online (or use a DIY container) and then ask a local repair shop to run the adjustment program for a small fee.

  • Use Epson’s official service – For a flat fee, Epson can service the printer and reset the counter properly.

  • Third-party reset tools (legitimate) – Some reputable printer repair utilities (like WIC Reset Utility or AdjPro) offer paid resets for the SX130. These are safer, but always verify the publisher and scan with antivirus software. To reset your Epson Stylus SX130 Go to

  • Manual EEPROM reset – Not recommended; requires disassembling the printer and using special hardware (e.g., Arduino with serial connection to reset the EEPROM on the mainboard).

If you simply need the printer to work urgently, consider checking if your SX130 is still worth repairing – replacement printers often cost less than the time and effort involved.

If you still want to search for the tool on your own, use a fully updated Windows PC with a strong antivirus, disable internet before running the .exe, and be prepared to reinstall your OS if something goes wrong. Search for exact model "Epson SX130 adjustment program" but proceed with extreme caution.

Alternative: Manual Waste Ink System Modification

For advanced users, combine the reset program with a hardware mod: Your Epson SX130 displays the “Service Required” error

  1. Open the SX130 case (remove screws under stickers).
  2. Locate the waste ink tubes (two small silicone hoses leading to pads).
  3. Route these tubes to an external sealed bottle (e.g., a pill bottle with an air hole).
  4. Run the Adjustment Program reset.
  5. Result: Infinite printer life—you just empty the bottle every 6 months.

This mod makes the UPD reset program a permanent solution rather than a temporary fix.

What Is the Epson SX130 Reset Adjustment Program?

The Epson Adjustment Program (often shortened to AdjProg) is a proprietary service utility developed by Epson for authorized technicians. Unlike the standard drivers available to the public, the Adjustment Program gives low-level access to the printer’s internal flash memory (EEPROM).

For the Epson SX130 specifically, this program serves three critical functions:

  1. Waste Ink Pad Counter Reset: This is the primary use. The printer tracks how many cleaning cycles and prints have occurred. Once it hits a limit (usually around 15,000 to 20,000 pages), it locks up. The reset program zeros this counter.
  2. Initialize (EEPROM Reset): Clears all internal counters and returns the printer to a factory-fresh state.
  3. Head ID Input: If you ever replace the printhead, you must use this program to input the new Head ID (found on a sticker on the new part) to calibrate ink firing.

The “UPD” in our keyword stands for Updated. Older versions of the program may fail on newer firmware or operating systems (Windows 10/11). The “UPD” version typically includes:

  • Compatibility fixes for 64-bit Windows.
  • Patches for Epson’s anti-reset countermeasures.
  • Improved USB communication stability.

Alternatives

If you are not comfortable changing system dates or dealing with cracked software, there is a safer alternative:

  • WIC Reset Utility (WICReset): This is a legitimate, paid tool. You have to buy a "key" (usually around $10 USD) to perform one reset. It is safe, modern, and works on the latest operating systems without date tricks.