Epson Et2400 Reset • High-Quality & Hot

Resetting an Epson EcoTank ET-2400 is a common maintenance task used to resolve Wi-Fi connection issues, clear "service required" errors, or recalibrate ink levels. Because the ET-2400 lacks a built-in LCD screen, all resets are performed using specific button combinations or external software utilities. 1. Resetting Wi-Fi and Network Settings

If you are having trouble connecting to a new router or your smartphone cannot find the printer, a network reset is the first step. Step-by-Step Network Reset: Turn off the printer by pressing the Power button.

Press and hold the Network Status button (often marked with an "i") and the Power button simultaneously.

Hold both until the Wi-Fi and Wi-Fi Direct lights begin to flash alternately. epson et2400 reset

Release both buttons. The lights will eventually turn off, indicating the reset is complete.

Re-entering Pairing Mode: To connect to a new device after a reset, press and hold the Wi-Fi button for about five seconds until the lights start blinking to enter setup mode. 2. Resetting the Waste Ink Pad Counter

When the printer displays a "Service Required" error or the red lights flash, it usually means the waste ink pads are full. How to Reset Your Epson EcoTank ET-2400 Printer Resetting an Epson EcoTank ET-2400 is a common

7. Troubleshooting Reset Issues

| Problem | Solution | |---------|----------| | Reset tool says “Communication error” | Use USB cable, disable firewall temporarily, run as admin | | After reset, same error appears | Counter not fully reset. Try a different tool (AdjProg). | | Ink levels still show empty after refill | Clean ink pad contacts inside tank with dry cloth. | | Printer buttons unresponsive after reset | Pull power cord for 5 minutes, hold power button for 30 seconds (drain capacitors). | | No “Restore Default Settings” menu | Your firmware is locked. Update firmware first via Epson site. |

Quick troubleshooting checklist

  1. Power cycle the printer.
  2. Check for paper jams and remove any obstructions.
  3. Verify ink bottles are correctly installed and ink levels are sufficient.
  4. Run nozzle check and head cleaning from Maintenance.
  5. Restore factory/network settings if connectivity or settings are corrupted.
  6. If waste pad/service errors persist, contact Epson support or authorized service.

If you want step-by-step menu navigation for a specific reset action (factory reset, network reset, or how to run head cleaning) tell me which one and I’ll provide exact steps for the ET-2400.

(Invoking related search suggestions.)

This guide covers the different types of resets available for the Epson EcoTank ET-2400, ranging from simple network fixes to more complex maintenance counter resets.

Step 3: Enter Maintenance Mode (The Trickiest Part)

The ET-2400 will not accept a reset in normal mode. You must force it into Maintenance Mode:

  1. Connect the printer to your PC via USB (power still off).
  2. Hold down the "Stop" button (circle with a triangle inside) and the "Power" button simultaneously.
  3. Keep holding both for 5 seconds, then release only the Power button.
  4. Continue holding the Stop button for another 5 seconds.
  5. Release the Stop button.
  6. Look at the printer lights: The power light should be on, but the screen (if applicable) will be blank or show a strange pattern. You are now in maintenance mode.

How to factory reset the Epson ET-2400:

  1. Ensure printer is on.
  2. Press the Home button (the little house icon).
  3. Scroll to Settings (gear icon) > Press OK.
  4. Scroll to Restore Default Settings > Press OK.
  5. Select Reset Network Settings (or "Reset All Settings" if you want everything cleared).
  6. Confirm with Yes.
  7. The printer will reboot. The Wi-Fi light will flash orange, indicating it is no longer connected.

Note: This does NOT reset the ink levels or the waste ink counter. It only resets configuration data. Quick troubleshooting checklist

Final Pro Tips

  • Keep a log: Every reset = note the date and page count.
  • Reset only when the service light demands it — not preemptively.
  • Don’t use third-party ink during reset mode — it can confuse the firmware.
  • If the program doesn’t connect — disable your antivirus temporarily and run as administrator.