--- Download Driver Modem Telkomsel 4g Lte ((better)) Access
The Ultimate Guide to Download & Install Driver Modem Telkomsel 4G LTE (2025 Update)
Struggling with a modem that is detected but not connecting? If your Telkomsel 4G LTE modem (Ooredoo, Huawei, ZTE, or EVDO) is failing to connect, showing a yellow triangle in Device Manager, or simply refusing to install automatically, you most likely need the correct Driver Modem Telkomsel 4G LTE.
Without the proper drivers, your Windows, Linux, or even legacy macOS system cannot communicate with the modem’s internal chipset. This comprehensive guide provides safe, official, and alternative methods to download, install, and troubleshoot the drivers to get you back online at 4G LTE speeds. --- Download Driver Modem Telkomsel 4g Lte
Step 1: Identify Your Modem Model
- Open Device Manager (
Win + X → Device Manager)
- Look under Modems, Network adapters, or Other devices (yellow exclamation mark)
- Right-click → Properties → Details → Hardware Ids
- Search Google for the VID/PID (e.g.,
VID_12D1 PID_1F01)
Step 4: Configure Telkomsel APN (If needed)
If the modem connects but no internet:
- Open modem web interface (usually
192.168.0.1 or 192.168.1.1)
- Set APN to:
telkomsel
- Username & password: leave blank (or
wap / wap123 for older models)
Official Sources to Download Telkomsel Modem Drivers
⚠️ Avoid third-party “driver updater” sites – they often contain malware or fake drivers. The Ultimate Guide to Download & Install Driver
1. Download from Telkomsel’s Official Support Portal
Telkomsel provides driver packages for their branded devices (e.g., Telkomsel MIFI, Orbit, or Huawei E5573). Open Device Manager ( Win + X →
- Go to:
telkomsel.com > Support > Download Drivers.
- Search for:
Telkomsel 4G LTE USB Modem Driver.
- File name typically:
Telkomsel_4G_LTE_Driver_Package_v2.1.exe
Error 2: Driver installs, but only 2G/Edge (No 4G LTE)
- Cause: The modem is locked to "3G Only" mode.
- Solution: Open the dashboard. Go to Network Settings > Network Selection > Change from "Auto" to "LTE Only" (or 4G Only). Telkomsel has shut down most 3G towers, so forcing LTE is essential.
Linux (Ubuntu/Debian)
- ModemManager (
sudo apt install modemmanager)
- For Huawei HiLink mode: use
usb-modeswitch
Error 3: Code 10 (This device cannot start)
- Cause: Power management or USB selective suspend.
- Solution:
- Device Manager > Universal Serial Bus controllers > Right-click USB Root Hub > Properties > Power Management > Uncheck "Allow the computer to turn off this device."
- Repeat for every USB Hub entry.