Download Android 7.1 Stock Firmware For Mxq Pro 4k Tv Box Upd

To download and install the Android 7.1 stock firmware for your MXQ Pro 4K TV box, you first need to identify your device's specific hardware. Because these boxes are not Google certified and use various internal components, installing the wrong firmware can permanently "brick" the device. Step 1: Identify Your Chipset

The firmware you need depends entirely on the processor inside your box. To find this, check the Settings > About section on your device or open the case to look for the board model.

Amlogic S905 / S905W: Commonly found in standard MXQ Pro 4K models. Rockchip RK3229: Often found in 5G or updated versions. Step 2: Download the Firmware

Once you know your chipset, you can find the specific Android 7.1 (Nougat) firmware images on specialized sites:

For Rockchip RK3229: Stable builds for version 7.1.2 are available for specific board models like MXQ-4K-3229XD2-20171116-V0.2. download android 7.1 stock firmware for mxq pro 4k tv box

For Amlogic S905W: Firmware for the MXQ PRO 4K S905W is typically around 800MB and includes build number NHG47L.

General Repositories: Sites like ChinaGadgetsReviews or forum archives on 4PDA often host mirrors for these ROMs. Step 3: Installation Methods

There are two primary ways to flash the firmware depending on your chipset's requirements:

Step 4: Flashing

The PC will make a "ding-dong" sound.
USB Burning Tool will show "HUB3-1: Connection Success" and start loading.
Wait for 100% (This takes 3-5 minutes).
Click Stop.
Disconnect the USB cable.

2. Where to find it (safe approach)

Do not use random “universal” files. Instead: To download and install the Android 7

Check the PCB board number (open the case, read the white text).
Look for the WiFi chip (small square chip with antenna pin).
Search for:
"MXQ Pro 4K [board number] [wifi chip] Android 7.1 stock firmware"
on XDA Forums or FreakTab.com.
Common firmware sources (reliable for MXQ): Step 4: Flashing
- Chinagadgetsreviews (archived firmware section)
- FreakTab – MXQ Pro 4K threads
- MEGA / Google Drive links shared by trusted users

2. XDA Developers Forum

Search for "MXQ Pro 4k [S905X] Firmware." XDA members often mirror stock images. Look for posts by Sasvlad or RickyDivjak – they are trusted maintainers.

Tools You Need Before Flashing

Gather these items:

USB Burning Tool v2.1.8 or v2.2.0 (Windows only)
USB A-to-A cable (male to male – do not use a charging cable; it must support data transfer).
The Stock Firmware (.img file) – Downloaded from the step above.
Windows PC (Windows 7, 10, or 11).
A small tool or paperclip (to press the reset button).

Which firmware you need

MXQ Pro 4K boxes come in slightly different hardware variants (Amlogic S905, S905W, S905X, S905XQ etc.). Only flash firmware that specifically lists the same SoC/model (often shown as S905/S905W/S905X or a board code like P281/S905XQ_V1.0).
If you don’t know your board, check the sticker/PCB, original listing, or read the boot log (if accessible) — flashing the wrong binary can brick the device.

Step 1: Identify Your Hardware Version

This is the most critical step. The "MXQ Pro 4K" label on the box does not guarantee the internal hardware. There are versions based on Amlogic S905, S905W, and S905X chipsets.

Before downloading, remove the sticker on the bottom of the device or open the casing to look at the motherboard. You need to find:

The Chipset: (e.g., S905W or S905X).
The Board Model: Common models include QM151, K200, or p281.
The WiFi Chip: (e.g., AP6330, QCA9377).

Note: Android 7.1 is most commonly associated with the Amlogic S905W and S905X variants. If your box originally ran Android 5.1 (Lollipop) and you are trying to upgrade, ensure your hardware actually supports the newer ROM.