To set up your Movitel D-com 3.5G USB modem , follow this guide to install the software and configure your internet connection. 1. Software Installation
Most Movitel D-com modems are "Plug & Play," meaning the drivers are stored on the device itself. Automatic Setup : Insert the
into your computer’s USB port. The installation wizard should launch automatically. Follow the on-screen prompts to complete the process Manual Setup : If nothing happens, open "My Computer" (or "This PC"), double-click the D-com 3.5G drive, navigate to the folder, and run AutoRun.exe ZTE Official Website 2. Configure APN Settings
If the modem installs but won't connect, you may need to manually enter the Movitel Mozambique network settings: : Movitel (or any name) Leave blank Leave blank : PAP or CHAP (usually automatic) 3. Quick Activation via SMS
You can often receive automatic configuration settings directly to your SIM card by texting to the number from your Movitel line. 4. Connection Troubleshooting : Ensure the LED light on the
is blinking or solid (usually blue or green) to indicate 3.5G/HSPA signal strength.
: Ensure your SIM card is active and has an available data balance. Compatibility
: If using Windows 10 or 11, you may need to run the installer in Compatibility Mode (Right-click AutoRun.exe > Properties > Compatibility) if the software is older. ZTE Official Website For further assistance, you can visit a local Movitel Store or contact their customer support.
Movitel Mozambique APN Settings Guide | PDF | Internet | 4 G - Scribd
The setup for the Movitel D-com 3.5G modem is generally a "plug-and-play" process since the installation software is embedded directly on the device. ZTE Official Website Installation Process for Windows Hardware Connection
: Plug the D-com USB connector firmly into a USB port on your PC. Automatic Setup
: Windows should automatically detect the hardware and launch the installation wizard. Manual Launch (if needed) : If the setup doesn't start automatically, open My Computer (or This PC), navigate to the D-com 3.5G drive, and run the AutoRun.exe file located in the Completion
: Follow the on-screen prompts to finish the software installation. Once complete, the management program will typically launch automatically. ZTE Official Website Configuration (APN Settings)
If your modem is installed but not connecting to the internet, you may need to manually configure the Access Point Name (APN): Profile Name : Movitel Internet (or 3.5G Internet). Access Number Username/Password : Leave both fields blank. Activation
Before first use, ensure your SIM card is active. You can insert the SIM into a mobile phone and call to activate the account. Troubleshooting & Driver Downloads Software Mirror
: If you need to re-download the official application, it is developed by Huawei Technologies and is sometimes hosted on third-party sites like Software Informer
: For older systems requiring manual driver updates, generic WCDMA HSPA 3.5G drivers can be found on Driver Scape Do you need help with
the modem for other networks, or are you looking for the latest data packages for Movitel? Modem USB Guia Rápido - ZTE Devices 18 Jun 2013 —
To set up your Movitel D-com 3.5G modem , you typically do not need to download external software, as the setup files are stored directly on the device. Installation Steps
Windows Auto-Installation: Most systems automatically launch the setup wizard when you plug the modem into a USB port.
Manual Setup (Windows): If the installer doesn't start automatically, go to My Computer (or This PC), open the drive labeled D-com 3.5G , navigate to the Windows folder, and run AutoRun.exe.
Mac OS Setup: Plug in the modem, double-click the D-com 3.5G CD-ROM icon that appears on your desktop, and run the installation package inside. Network Configuration
Once the software is installed, you may need to configure the connection settings if it does not connect automatically: APN: internet. Access Number: *99# (common for most 3.5G/WCDMA modems). Useful Digital Tools
To manage your Movitel account balance or buy data packages after setting up your modem, you can use these official resources:
Super Movitel App: Available on the Google Play Store for account management and recharging.
USSD Codes: Dial *150*CODE# to recharge and *451# to check your balance from a Movitel-linked device. d-com 3.5g movitel download setup
Official Website: Visit Movitel.co.mz for the latest internet packages and device support. Super Movitel - Apps on Google Play
The Movitel D-Com 3.5G modem (such as the Huawei E173) is a plug-and-play device designed for high-speed internet access in Mozambique. Most versions include built-in setup software that launches automatically upon connection. Installation & Setup Instructions 1. Physical Setup
Insert SIM: Slide off the front cover and insert your Movitel SIM card into the designated slot.
MicroSD (Optional): If you have a memory card, insert it into the side slot for use as a USB storage drive.
Connect: Plug the D-Com modem into an available USB port on your computer. 2. Software Installation (Windows)
Auto-Run: Most systems will automatically detect the device and start the setup wizard. Follow the on-screen prompts to complete the process.
Manual Launch: If the installer does not start automatically: Open My Computer (or This PC). Locate the drive named D-com 3.5G. Open the folder and run AutoRun.exe or Setup.exe.
Completion: Once installed, a shortcut for the Movitel management software will appear on your desktop. 3. Network Configuration (APN)
If the software does not connect automatically, you may need to manually enter the Movitel Mozambique APN settings: Profile Name: Movitel Internet APN: internet Access Number: *99# Username/Password: Leave blank Account Management & Commands
You can manage your account directly through the management software's USM/SMS menu or by using these codes on a phone:
Check Balance: Dial *451# or use the "Check Balance" option in the software.
Recharge: Dial *150* or enter the code in the "Recharge" section of the dashboard. Data Balance: Dial *131# to check your remaining data. Device Status Indicators The LED on your D-Com modem indicates its status: Green: Connected to 2G (GPRS/EDGE) network. Blue: Connected to 3G/3.5G (WCDMA/HSPA) network. Cyan: Connected to HSPA+ (3.5G+) network. Off: Device is disconnected or power is off.
For further assistance, you can contact Movitel Support by calling 156 from a Movitel number.
Are you experiencing a specific error message or connection problem with your D-Com modem?
Movitel Mozambique APN Settings Guide | PDF | Internet | 4 G - Scribd
D-com 3.5G Movitel Setup and Installation Guide Movitel D-com 3.5G USB modem
is a portable plug-and-play device designed to provide high-speed mobile internet access for computers and tablets. It primarily serves as a mobile broadband solution for users in Mozambique, offering portability similar to a flash drive. System Requirements
To ensure a successful installation, your device should meet the following minimum requirements:
Operating System: Compatible with Windows XP, Windows Vista, Windows 7, and Mac OS. Hardware: An available USB 2.0 port for modem connection. Installation Steps D-com modem
is designed for "plug-and-play" operation, meaning the software is often stored on the device itself. For Windows Users
Physical Connection: Plug the USB modem into an available USB port on your computer. Automatic Setup:
The operating system should automatically detect the new hardware and launch the installation wizard.
Manual Launch (if needed): If the installer does not start automatically, navigate to My Computer, open the D-com 3.5G drive, and run AutoRun.exe located in the Windows folder.
Follow Prompts: Follow the on-screen system prompts to complete the software and driver setup. For Mac Users Connection: Insert the modem into the USB port. Mounting: A D-com 3.5G CD-ROM icon will automatically appear on your desktop.
Execution: Double-click the installation package within that folder and follow the prompts to complete the process. Network Configuration (APN Settings) To set up your Movitel D-com 3
Once the software is installed, you may need to configure the Access Point Name (APN) to establish a connection to the Movitel network. APN Name: internet
Method: Access the "Settings" or "Connection Profile" menu within the D-com dashboard software and ensure the APN is set to "internet". Usage and Management
Connecting: Launch the installed D-com application and click the Connect button once the signal bars appear.
Balance Inquiry: You can often check your data balance by dialing *131# or using the SMS feature within the dashboard to send balance codes.
Safe Removal: Always close the application software before physically removing the modem from your PC to prevent data corruption. Modem USB Guia Rápido - ZTE Devices
D-Com 3.5G Movitel is a portable USB broadband modem used primarily in Mozambique to access high-speed mobile internet. Setting it up typically follows a "Plug & Play" process where the necessary drivers and connection software are embedded directly on the device. ZTE Official Website Installation Steps for Windows and Mac Hardware Preparation Open the modem's front cover and insert your Movitel SIM card with the metal contacts facing down. If available, you can also insert a microSDHC card for portable storage. Connection Plug the USB modem into an available port on your computer. Software Setup
: The system should automatically detect the hardware and launch the installation wizard
. If it doesn't start automatically, open "My Computer," locate the new CD-ROM drive (often labeled "D-com 3.5G"), and double-click the setup file AutoRun.exe
: A "D-com 3.5G" CD-ROM icon will appear on your desktop. Double-click it and run the installation package to complete the setup. Activation
If your SIM is not yet active, you may need to insert it into a phone and call to activate the account. ZTE Official Website Configuration & Usage Once installed, the Connection Manager dashboard allows you to: : Click the "Connect" button to access the internet. Manage SMS
: Send and receive text messages directly from your computer. Check Status : View network signal strength and data usage logs. ZTE Official Website Manual APN Settings If the modem does not connect automatically, ensure the is set correctly: Username/Password : Leave blank. Automatic Config : You can also text "CONFIG" to from a phone to receive settings via SMS. Are you experiencing a specific error message during the installation, or do you need help finding a specific driver version for your operating system?
Movitel Mozambique APN Settings Guide | PDF | Internet | 4 G
The Movitel D-com 3.5G USB modem features a "Plug & Play" setup, where the necessary software/dashboard is stored directly on the hardware and installs automatically upon connection. A standout feature of modern versions of this device is the Soft Wi-Fi or WiFi Router Mode, which allows you to turn your laptop into a hotspot and share the internet connection with up to 10 other devices. Key Features
Plug & Play Installation: No external download is usually required; the installation wizard starts automatically when plugged into a PC.
WiFi Hotspot Capability: Some models (like the Huawei-based versions) allow the host computer to act as a wireless access point for smartphones and tablets.
Automated Configuration: Movitel often uses an automated APN process that sends an SMS to configure the device correctly for the Mozambique network without manual input.
Hardware Compatibility: The USB-powered device works across laptops, power banks, and even car chargers for portability. Setup Guide
Hardware Connection: Insert a valid Movitel SIM card into the modem slot and plug the device into a USB port on your computer. Software Installation:
Automatic: On Windows, the setup process should launch automatically. Follow the on-screen prompts.
Manual: If it doesn't start, navigate to My Computer > D-com 3.5G > Windows and run AutoRun.exe. Network Configuration: The APN for Movitel Mozambique should be set to internet.
Most devices will auto-configure this upon first connection with a Movitel SIM.
Connecting: Once the dashboard opens, click "Connect" to access the network. Troubleshooting & Support
Recharging: Use *150*PIN# to recharge or *451# to check your balance directly through the dashboard's SMS/USSD interface.
Official Downloads: If you need to reinstall the software, check the Movitel Support/Downloads page for the specific D-com 3.5G dashboard.
D-Com 3.5G Movitel Download Setup Guide
Are you looking to set up your D-Com 3.5G Movitel dongle? Follow these easy steps to download and install the setup:
Step 1: Insert the Dongle Insert the D-Com 3.5G Movitel dongle into an available USB port on your computer.
Step 2: Download the Setup Go to the official website of Movitel or D-Com and download the setup software for your dongle. You can also search for the setup file online, but make sure to download it from a trusted source.
Step 3: Run the Setup Once the download is complete, run the setup file (usually named "setup.exe" or similar). Follow the on-screen instructions to begin the installation process.
Step 4: Install the Drivers The setup will guide you through the installation of the necessary drivers. Allow the installation to complete.
Step 5: Configure the APN After installation, configure the APN (Access Point Name) settings. For Movitel, the APN is usually "movitel".
Step 6: Connect to the Internet Once the setup is complete, you can now connect to the internet using your D-Com 3.5G Movitel dongle.
Troubleshooting Tips
First, I need to confirm if D-Com is a specific brand. Maybe it's a typo? Or perhaps an older model? 3.5G usually refers to HSPA, which is a 3G technology, not 4G. So, Movitel's network might be using HSPA in certain regions. I should mention the difference between 3G and 3.5G here.
Next, the setup process. Typically, APN settings are required. Movitel might have specific APN settings that users can input into their devices. I'll need to gather those. It's important to check if those settings are accurate, maybe look up current sources or Movitel's official site to confirm. Also, note if there's a username and password required.
Another point: activation process. Sometimes, a SIM card needs to be activated via the provider's services. Mentioning how to activate the SIM through Movitel could be helpful. Also, possible data bundles or packages they might need to purchase for download speeds.
Troubleshooting steps are essential. Users might face issues like incorrect APN settings, no signal, slow speeds. Including common fixes like checking network signal, restarting the device, manual APN entry, or contacting customer support would be useful.
I should also address regional variations. Movitel operates in different countries, so the APN and setup might vary. Maybe suggest users check the Movitel website in their specific country for accurate information.
Finally, conclude by summarizing the steps and offering assistance if they have more questions. Keep the tone friendly and instructional. Make sure to mention that if the steps don't work, they should contact Movitel support for further help.
Here’s a comprehensive guide on setting up the D-Com 3.5G Movitel download connection. This article is tailored for users looking to configure their devices for Movitel’s 3.5G network using a D-Com (Dacom) modem or device. Always verify settings with Movitel if available, as configurations may vary by region or device firmware updates.
While this article focuses on the download setup, it is worth noting that 3.5G technology is being sunset in major cities.
If you are repeatedly re-installing the D-COM 3.5G driver because the connection drops, consider upgrading your hardware. A second-hand Huawei E5573 (4G MiFi) will cost ~1,500 MZN and radically improve your experience.
Many users make the mistake of plugging the modem into their computer and expecting Windows to install a generic driver. While Windows may recognize the hardware as a "storage device," it rarely installs the proprietary connection manager required to send the AT commands for 3G connectivity.
The official D-COM 3.5G Movitel setup provides:
movitel or internet.movitel.co.mz).If you want to share the Movitel 3.5G connection with a home or office (e.g., 10 devices), don't keep the dongle in a laptop. Instead:
movitel*99#Pro Tip: If the router doesn't recognize the D-COM, you may need to flash custom firmware (like ROOter or OpenWRT) with the usb-modeswitch package.
If dashboard fails, use Windows dial‑up:
*99# (or *99***1#)movitel / movitel if required)Setting up the D-Com 3.5G Movitel download is straightforward with the correct APN and software setup. If you face persistent issues, contact Movitel or D-Com support for personalized assistance. Ensure your SIM is active and charged with a valid data bundle for uninterrupted connectivity.
It looks like you're asking for a report on the “D-Com 3.5G Movitel Download Setup” — likely related to USB modems or dashboard software for Movitel, a mobile network operator in Mozambique (joint venture between Viettel and Mozambique’s SPI).
Below is a structured informational report based on common technical support issues, setup procedures, and software details for the D-Com 3.5G USB modem used on Movitel’s network. Ensure that your dongle is properly inserted into