Aovo Pro Firmware B01011k Repack Download Updated

The AOVO Pro Firmware B01.0.11K is widely considered the "golden version" by the community because it allows users to bypass factory speed limiters. While newer official versions often lock the top speed for safety and legal compliance, the 11K version remains a sought-after download for performance enthusiasts. Key Features & Benefits

Speed Unlocking: Installing this specific firmware enables a 45 km/h (approx. 28 mph) option in the advanced settings of compatible apps.

Compatibility: It is primarily used with the 365GO app (blue icon) rather than the official AovoPro app on Google Play (black icon), as the official app typically does not offer this legacy firmware version anymore.

Hardware Efficiency: Users report that while the display might show higher speeds, real-world performance is often capped around 31–35 km/h (19–22 mph) due to the physical limitations of the motor and battery. Known Issues & Bugs

Lighting Glitch: A common bug in version 11K is that the scooter's physical light button may stop working, requiring users to turn the lights on or off only through the app.

Risk of "Fake" Firmware: Some third-party downloads labeled as 11K are merely "display hacks" that change the speed readout on the screen without actually increasing the motor's output.

Potential Errors: Incorrect flashing can lead to E3 error codes (throttle issues) or even bricking the controller if the process is interrupted. How Users Typically Install It

Since the official AovoPro app has removed this version, users often follow a specific "downgrade" trick using the 365GO app:

Connect via the 365GO app (iPhone is often cited as more reliable for this). Start a firmware upgrade to any available version.

Force close the app at exactly 10% progress to put the scooter in "update mode".

Re-open the app and select B-01.0.11K from the now-available list of versions.

Important Safety Note: Modifying firmware may void your warranty and exceed local legal speed limits for electric scooters. Always wear a helmet and check local regulations before increasing your scooter's top speed. AOVO Pro Speed hack. - Imgur

Drafting a post for the AOVO Pro firmware B01011K update requires caution, as this specific version is primarily used by the community for speed unlocking rather than general maintenance.

Below is a draft post you can use, highlighting the updated installation method and key features.

🚀 AOVO Pro Firmware Update: B01011K Download & Guide (2026)

Are you looking to unlock the full potential of your AOVO Pro electric scooter? Firmware version B01011K is widely considered the "holy grail" for users wanting to bypass the standard speed limits. ⚠️ Essential Update Note

The official AovoPro App (Black Icon) has recently optimized its firmware judgment and often does not offer the B01011K version for direct download anymore. To access this specific build, most users now rely on the 365GO App (Blue Icon). ✨ Key Features of B01011K

Speed Unlock: Allows users to increase the speed limit to roughly 40-45 km/h (25-28 mph) in advanced settings, compared to the standard 25 km/h.

Xiaomi M365 Pro Compatibility: Often compatible with M365 Pro clones.

Known Bug: Be aware that in this specific version, the headlight can sometimes only be toggled through the app. 📥 How to Install/Downgrade to B01011K

Download the 365GO App: Since the stock AovoPro App may block this version, use the 365GO App available on iOS and Android stores.

Connect Your Scooter: Ensure Bluetooth is active and your scooter is paired. aovo pro firmware b01011k download updated

Navigate to Firmware: Go to Settings -> Firmware Upgrade -> Available Version.

Select B-01.0.11K: If it is not immediately visible, some users report success by starting a different update, force-closing the app at 10%, and then re-opening it to refresh the "Available Versions" list.

Configure Speed: Once installed, go to Advanced Settings and adjust the Speed Limit Value to your preference.

Disclaimer: Modifying firmware is done at your own risk. It may void your warranty and increase wear on the motor or battery. Always wear protective gear when testing new speed settings.

Can Aovo pro scooters be speed unlocked? : r/ElectricScooters

Firmware B-01.0.11K is a specific version for AOVO Pro scooters often used to bypass factory speed limits. To download and install it, users typically use the 365GO app instead of the standard AOVOPro app. How to Install Firmware B-01.0.11K

Because the official AovoPro App often removes older firmware versions, community members use this specific "downgrade" trick via the 365GO app:

Download the 365GO App: Get the 365GO App (blue icon) from your app store.

Connect Your Scooter: Turn on your scooter and connect it to the 365GO app via Bluetooth.

Initiate Update: Go to Settings > Firmware Upgrade. Select any available version to start the process. The "Downgrade" Trick:

Let the update reach approximately 10%, then immediately force-close the app.

Re-open the 365GO app and return to the Firmware Upgrade section.

The version B-01.0.11K should now appear in the list of available versions.

Complete Flash: Select B-01.0.11K and let it finish the installation. Key Features & Known Issues

Speed Unlock: Once installed, you can often set the speed limit higher (up to 45km/h or 28mph) in the advanced settings.

Light Bug: A known issue with this version is that the scooter's lights may only work when turned on through the app.

Risk of "Fake" Firmware: Some versions labeled as updates are "fakes" that only change the display speed without actually increasing the motor's power. Alternative: Stock ROMs

If you need to return your device to its original factory state, you can find official stock ROM files for various AOVO models on sites like AndroidMTK.

Warning: Flashing firmware carries a risk of "bricking" your scooter's controller. Ensure your scooter is fully charged and you maintain a stable Bluetooth connection throughout the process. If you'd like, I can help you: Find the latest official version for a specific AOVO model.

Troubleshoot a failed firmware update or a "locked" scooter. Find instructions for a different scooter model. Let me know how you'd like to proceed! AOVO Pro no firmware available in app. : r/ElectricScooters

AOVO Pro firmware version B-01.0.11K is a specific version that became popular within the electric scooter community primarily because it was known to allow a higher top speed of up to . However, modern versions of the official AovoPro App often do not offer this version for download. Updating or Installing B-01.0.11K The AOVO Pro Firmware B01

Because official support for this firmware has shifted, users typically use alternative methods to access it: Third-Party Apps : Some users recommend using the (available on the ) instead of the official AOVO Pro app. Through this app, navigate to Firmware Upgrade B-01.0.11K from the list of available versions. The "10% Trick"

: A common community workaround involves starting an update for any available version in the 365Go app and closing the app when the progress reaches roughly

. Upon reopening, version B-01.0.11K may appear as an selectable option. Manual Flashing : Advanced users have used the Smartphone Flash Tool

to install stock ROMs, though this carries a high risk of "bricking" the device (making it unusable) if done incorrectly. Known Issues & Considerations Lighting Bug

: This specific firmware version often has a bug where the scooter's physical light button stops working; the light can then only be controlled via the app. Fake Speed Readouts

: Be cautious of unofficial "speed hacks." Some community members warn that certain firmware updates only change the digital speed display rather than increasing the actual motor output. Risk of Locking

: Attempting to flash non-factory firmware on newer models can cause the scooter to lock permanently into "Park" mode. Manufacturer Changes

: From October 2021, AOVO Pro underwent a brand upgrade, and many newer models feature updated internal hardware that may not be compatible with older 11K firmware.

For general maintenance and standard updates, users should refer to the official AOVO Pro website for official support and documentation. for a specific AOVO Pro model like the AI responses may include mistakes. Learn more AOVOPRO Brand Upgrade Statement

Updating to firmware B-01.0.11K is a common technique used by Go to product viewer dialog for this item.

owners to unlock higher speed limits, often up to 45km/h (approx. 28mph). However, this version is typically hidden or unavailable in the standard AOVO Pro app, requiring a specific workaround using the 365GO app. ⚡ Preparation Checklist

Before starting, ensure your scooter and phone meet these safety requirements:

Battery Level: Charge your scooter to at least 50% (80%+ is safer).

Connection: Stay within 2 meters of the scooter during the entire process.

App Choice: Use the 365GO App (App Store) or 365GO (Google Play) rather than the official AOVOPro app. 🛠️ Step-by-Step Installation Guide

The "10% Hack" is the primary method to force the scooter into a mode where it will accept the older B-01.0.11K 1. Initial Connection Open the 365GO app. Connect to your scooter via Bluetooth. If prompted for a password, try 888888 or 000000. 2. The Firmware Downgrade Trick Go to Settings > Firmware Upgrade.

Select the Available Version (it might show a newer version like v1.2.x or v1.3.x). Start the upgrade.

⚠️ CRITICAL: When the progress reaches exactly 10%, force-close the app (swipe it away from your multitasking view). 3. Flashing Version B-01.0.11K Re-open the 365GO app. The scooter should now be in a "bootloader" or update mode. Go back to Firmware Upgrade. The version B-01.0.11K

should now appear in the list of available versions. Select it and let it complete to 100%. 4. Unlocking the Speed Once finished, go to Advanced Settings. Locate the Speed Limit Value. Change the limit to 45km/h or the maximum available. ⚠️ Important Risks & Known Bugs B-01.0.11K

is a community-driven "hack" and carries specific downsides: AOVO PRO E-SCOOTER - HOW TO USE THE 365GO APP

Aovo Pro Firmware B01011K: Download & Update Guide

The firmware version B01011K is associated with certain Aovo Pro electric scooters (commonly the AovoPro ES80 or similar M365-inspired models). This guide explains what this firmware does, where to find it, and how to safely update your scooter. Aovo Pro Firmware B01011K: Download & Update Guide

How to update (concise steps)

Back up important footage from the SD card.
Download the B01011K firmware file from Aovo’s official support page (or the vendor you purchased from).
Format the SD card in-camera (recommended) or use FAT32 on PC.
Copy the firmware file to the root of the SD card.
Insert the card and power the dashcam; follow on-screen prompts or wait for the automatic update/LED indicator.
After update, verify firmware version in settings and test a short recording.

🛴 [Update] AOVO Pro Firmware B01011k Download & Review

Attention all AOVO Pro riders!

There is a renewed discussion in the community regarding the B01011k firmware version. Many users are looking to download this specific version to unlock specific features or fix bugs found in later updates.

Here is everything you need to know about the B01011k update, including the download link and installation guide.

Where to Get Future Firmware Updates

Bookmark these official resources:

Aovo Pro App: Google Play / App Store
Official Support Page: support.aovopro.com/firmware
Aovo Pro Community Forum (unofficial but helpful): r/AovoPro on Reddit

Stay away from “cracked firmware” sites promising 30 mph. They often contain malware or corrupted bootloaders.

Disclaimer: Firmware updates carry inherent risks. This article is for educational purposes. The author is not responsible for bricked devices or voided warranties. Always back up your original firmware if possible.

Last updated: October 2025 – verified against Aovo Pro B01011K release notes.

Firmware version B-01.0.11K for the AOVO Pro (a popular Xiaomi M365 clone) is frequently sought after because it is one of the few versions that supports a specific speed unlock Why Users Look for B-01.0.11K

Modern versions of the official AOVO Pro app have removed the ability to increase speed limits beyond factory settings. However, version B-01.0.11K is known in the enthusiast community for: Higher Speed Limits:

Enabling a "45 km/h" option (though physical speed usually caps around 31–35 km/h due to motor/battery limits). Legacy Support:

Working with older third-party apps like "365Go" which allow deeper setting access than the current official app. How to Access the Firmware (Updated Community Method) Since the official AOVO website

usually only pushes the latest restricted firmware, users often use a "downgrade" trick via the (available on the App Store): Download 365Go:

Connect your scooter to this app instead of the official AOVO app. Trigger Firmware List: Firmware Upgrade The "Interruption" Trick:

Some users report that starting an update and then closing/reopening the app forces the list to refresh, showing legacy versions like B-01.0.11K under the "Available Version" dropdown. Select version B-01.0.11K and let the process finish. Important Warnings Lights Bug:

This specific firmware version has a known bug where the physical headlight button on the scooter may stop working; the lights must be turned on/off via the app. Brick Risk:

Flashing firmware carries a risk of "bricking" (permanently disabling) your scooter's controller. Ensure your scooter is fully charged and do not disconnect Bluetooth during the process. Hardware Limits:

Even if the app says 45 km/h, the AOVO Pro's 350W motor and 36V battery typically cannot exceed 35 km/h (approx. 21-22 mph) under real-world load. Are you currently having trouble connecting your scooter to the app, or do you already have the installed?

Can You Downgrade from B01011K?

Yes, but with restrictions. Some riders prefer older firmware because it allowed slightly higher top speeds. If you want to go back to B01011F or B01011H:

Use M365 Tools or XiaoFlasher.
You need the original .bin file for the older version.
Note: Downgrading may trigger a checksum error and require a controller reflash.

However, Aovo does not support downgrades, and doing so might make the app stop recognizing your scooter. Only downgrade if you are technically experienced.

Method 3: Using a Windows PC with ST-Link (Advanced Users Only)

If your scooter is bricked or won’t connect via Bluetooth:

Open the deck of your Aovo Pro to access the controller.
Connect an ST-Link V2 programmer to the SWD pins.
Use STM32CubeProgrammer to flash the B01011K hex file.

Note: This voids warranty unless done by an authorized service center.