While there is no official "Avenged Sevenfold" standalone collection for AmpliTube 5 Go to product viewer dialog for this item.
, you can achieve the band's signature "hot" and aggressive guitar tones by combining specific high-gain amp models and presets available within the AmpliTube 5 ecosystem. Core Gear for the A7X Tone
To emulate the sound of Synyster Gates and Zacky Vengeance, focus on high-gain British and American-style amplifiers:
British High-Gain: For the saturated mid-forward crunch often heard on earlier albums, use the or models found in the AmpliTube 5 gear list Modern American Lead: For tighter, "hot" distortion, the Mesa/Boogie Triple Crown or
simulations provide the heavy bottom end and aggressive high-end required for tracks like Nightmare. Boutique Gains: The (based on a Bogner XTC) and VHandcraft 4
(based on a Diezel VH4) are excellent choices for the complex, harmonically rich leads typical of the band's later work. Essential Settings & Signal Chain
Tighten the Low End: Use a Noise Gate aggressively to eliminate string buzz during rapid-fire riffs. Boost mids around 1-2kHz to ensure solos cut through the mix. Drive & Sustain : Consider placing an overdrive pedal like the OverScream
(Tube Screamer style) in front of the amp with the gain low and volume high to "tighten" the high-gain response.
Ambient Effects: For solos, add a touch of room reverb or a short digital delay, but keep rhythm tracks dry for maximum impact. Community Presets (ToneNET)
Instead of building from scratch, you can find artist-inspired presets on ToneNET, IK Multimedia's preset-sharing platform:
Users frequently upload "Amp Match" sounds for specific albums like City of Evil or Waking the Fallen.
Look for presets tagged with "Synyster Gates" or "Avenged Sevenfold" to instantly load pre-configured signal chains featuring the band's preferred cabinet and mic placements. Tone Tips for Avenged Sevenfold
Scale Choice: Use the D Hungarian Minor scale (D-E-F-G#-A-Bb-C#) to capture the band's "spooky" and exotic melodic feel.
Harmonies: Harmonize lead parts a third up to replicate the dual-guitar attack popularized by the band.
While there is no official "Avenged Sevenfold" gear pack for AmpliTube 5
, you can achieve their "hot" high-gain tone by utilizing the
preset sharing community or building a custom rig using specific gear models. Creating the Tone in AmpliTube 5
To capture the aggressive, mid-focused sound typical of Synyster Gates and Zacky Vengeance, focus on the following configuration: Amplifier Choice
: Use high-gain, British-voiced or modern American-style amps. Mesa/Boogie Rectifier style
: Provides the tight bass and aggressive distortion needed for rhythm. British-voiced (Marshall style) : Favored for mid-range focus. Key "Hot" Settings : Set around
for rhythm and higher for leads to achieve that "hot" saturated sound.
: Avoid "scooping" the mids. Boost mid-range (around 1-2kHz) to ensure clarity and cut through the mix. : Keep presence balanced (around 6–7) to avoid harshness. Essential Stompboxes Tube Overdrive (Tube Screamer style)
: Place this before the amp with the drive low and tone high to tighten up the low-end palm mutes. Noise Gate
: Use this aggressively to kill string buzz and keep riffs tight. : You can find fan-made presets for specific albums like Waking the Fallen amplitube 5 avenged sevenfold hot
or songs like "Almost Easy" and "Nightmare" on platforms like or via creators on Recommended Products for This Tone
If you are looking to expand your gear library to better match this style:
Avenged Sevenfold Amp Settings (gear and tone tips) - Guitar Chalk
Here’s a concise review of AmpliTube 5 Avenged Sevenfold Collection (often referred to as the “A7X” or “Synyster Gates” pack), based on user feedback and tonal analysis.
Note to the user: If you need this formatted as a specific academic citation style (APA, MLA, Chicago) or as a shorter blog post rather than a formal paper, let me know and I can revise it.
Dialing in the Fire: Get the "Hot" Avenged Sevenfold Tone in AmpliTube 5
If you’re looking to capture the aggressive, razor-sharp guitar tones of Synyster Gates Zacky Vengeance AmpliTube 5
is one of the most powerful tools in your digital shed. Achieving that "hot" A7X sound—characterized by high-gain clarity, tight low ends, and singing leads—requires a specific combination of gear and EQ strategies.
Here is how to set up your virtual rig to nail those signature riffs from City of Evil Hail to the King 1. The Core Amp Heads
To get close to the band's massive wall of sound, you need high-gain amplifiers that offer a "thick" but articulated distortion. MESA/Boogie 90s Dual Rectifier Head Guitar Center Perfect for the Beast and the Harlot Almost Easy era. Use the Triple Rectifier
model in AmpliTube 5 for that iconic "modern" high-gain sizzle. British High Gain Synyster Gates has frequently used Marshall JVM models for his live and studio tones. In AmpliTube, the
models provide the necessary mid-range punch for those neoclassical-style leads. Bogner Uberschall Distortion Pedal For a darker, heavier rhythm tone seen on Waking the Fallen German Gain Bogner Uberschall ) model is a top choice 2. Signal Chain & Stompboxes A7X tones aren't just about raw gain; they are about controlled gain. You must use utility pedals to keep the sound tight. Avenged Sevenfold Gear Guide: Gates, Vengeance, Christ
To achieve the signature Avenged Sevenfold (A7X) sound in AmpliTube 5, you should focus on a high-gain, British-voiced foundation with tight equalization and aggressive noise gating. The following core components and settings are recommended for recreating the tone of Synyster Gates and Zacky Vengeance: Core Amp and Cabinet Setup Amplifier Selection: Use a high-gain metal amp sim. A Mesa Boogie Triple Rectifier
style is widely recommended for its massive, punchy sound. Alternatively, use a British-voiced amp (like a
) to capture the mid-range focus seen in Synyster Gates' signature gear. Cabinet Choice: Pair your amp with a 4x12 Brit 30
(equipped with Vintage 30 speakers) for a classic high-end bite. Detailed Tone Settings
For a standard A7X high-gain tone, use these starting values: Gain: 8.5 to 9 (push for saturation but keep it clear). Bass: 4 to 5 (keep it slightly scooped to avoid muddiness).
Middle: 1 to 3 (scooped for modern metal, though some eras favor higher mids for presence). Treble: 6 to 7 (maintain high-end clarity). Presence: 6.5 to 7 (adds "cut" to the mix). Essential Signal Chain & Effects
Stomp - Overdrive: Place a Tubescreamer-style pedal in front of the amp. Set the Drive to 0, Level to 8-10, and Tone to 4-5 to tighten the low-end response.
Noise Gate: Use an aggressive noise gate at the beginning of your chain to kill string buzz and create "tight" palm-muted stops. Rack EQ : Use the Go to product viewer dialog for this item.
or similar to cut muddiness around 470 Hz (-6 dB) and boost highs around 10 kHz (+4 dB) for brightness.
Solos: Add a touch of room reverb or delay for lead sections, but keep rhythm tracks dry to maintain punch. Tuning and Performance Tips
Tuning: Most A7X songs require Drop D (e.g., "Almost Easy") or Drop C#. While there is no official "Avenged Sevenfold" standalone
Technique: Use your bridge pickup for heavy rhythms and palm-muted chugs. Synyster Gates typically uses high-output humbuckers and picks hard to achieve his aggressive attack.
Watch these tutorials for step-by-step guidance on dialing in specific A7X album tones and Synyster Gates' signature settings: Avenged Sevenfold - Almost Easy | GUITAR TONE TUTORIAL 2K views · 1 month ago YouTube · Max Veres
To capture the "hot," aggressive guitar tone of Avenged Sevenfold (A7X) within AmpliTube 5, you must replicate the high-gain, British-voiced saturation favored by Synyster Gates and Zacky Vengeance. While Synyster Gates often uses his signature Schecter guitars and Hellwin amplifiers, you can achieve a professional-grade simulation by layering the right virtual gear and EQ settings. Core Gear Selection
To build a base A7X rig, focus on these components within AmpliTube 5:
Amplifier: Choose a modern high-gain or British-voiced head. The Mesa Boogie Rectifier (American High Gain) or a Marshall-style head (British Tube Lead) provide the necessary mid-range focus. For a more modern bite, some users prefer the Engl Powerball simulation.
Cabinet: Use a 4x12 cabinet loaded with Celestion Vintage 30 (V30) speakers.
Microphones: A classic "hot" studio setup uses a Dynamic 57 for bite paired with a Condenser 87 or C12 to capture the low-end body. Suggested Amp Settings
While settings vary by album, these parameters serve as a "hot" starting point for that signature high-octane sound:
Gain: 7–9 (Crank it for "hot" saturation, but avoid "mush") Bass: 5–6 (Keep it tight for fast palm-muting)
Mids: 6–7 (A7X avoids the "scooped" sound; they need mid-range for lead clarity) Treble: 6–7 Presence: 6 Essential Stompboxes & Effects
Overdrive/Boost: Place a low-gain overdrive like a Tubescreamer or SD1 (Diode Overdrive in IK terms) before the amp. Set the gain low and the volume high to "push" the preamp without adding fuzz.
Noise Gate: Essential for tight, "chuggy" rhythms. Place it at the beginning of your chain to kill string buzz.
Compression: Use a compressor on a low setting to even out dynamics during intricate sweep-picking or solos.
Lead Effects: Add a touch of digital delay or room reverb to lead sections to give them space. Quick Tips for Authenticity
Capturing the Avenged Sevenfold (A7X) guitar tone in AmpliTube 5 requires balancing aggressive, high-gain saturation with the surgical clarity that defines Synyster Gates' playing. While Gates is famous for his custom Schecter Hellwin amps, you can replicate his "hot" signature sound by leveraging specific models within the AmpliTube 5 ecosystem. Essential AmpliTube 5 Rig Setup
To get that "hot" A7X lead and rhythm tone, focus on high-gain British and American hybrid setups:
The Amp: Use a high-gain head like the Mesa/Boogie Triple Rectifier or Marshall JCM800 (modeled as British Lead S1). For the modern Hail to the King era, look for the Soldano SLO-100 model for its thick, mid-forward punch.
Gain Structure: Set your gain between 6 and 7.5. Going too high causes "mush," losing the articulation needed for fast alternate picking and sweeping. EQ Settings: Bass: 5–6 (Keep it tight to avoid muddiness).
Mids: 3–4 (Slightly "scooped" for classic metal rhythm) or 6–7 (For lead definition). Treble/Presence: 6–7 (Crucial for the "bite" in solos). Key Effects for the "Syn" Sound
Synyster Gates often uses subtle processing to make his "dry" tone pop:
Overdrive/Boost: Place a Tube Screamer model (TS808) in front of the amp with Level at 10, Drive at 0, and Tone at 5. This acts as a "tightener" for palm-muted riffs.
Phaser: Use a MXR Phase 90 style pedal on a slow setting for the "swirl" found in tracks like Beast and the Harlot.
Delay/Reverb: A short digital delay (15-20ms) with low feedback can simulate the double-tracked "stadium" feel. Tuning & Technique Tips IK Multimedia
The search for "AmpliTube 5 Avenged Sevenfold hot" primarily points to high-gain user presets and community-driven tone models within the IK Multimedia ToneNET ecosystem. There is no official "Avenged Sevenfold" signature artist pack from IK Multimedia, so "hot" typically refers to "hot-rodded" or high-output presets designed to replicate Synyster Gates' aggressive sound. AmpliTube 5 Avenged Sevenfold Tone Report
To achieve the signature Avenged Sevenfold sound in AmpliTube 5, users and third-party creators typically rely on specific gear combinations and community-shared presets. 1. Recommended Gear Configurations
Since an official pack doesn't exist, users simulate the sound by layering these specific models available in AmpliTube 5 :
Amplifiers: High-gain models are essential. The Mesa Boogie Dual Rectifier, Bogner Uberschall, and Peavey 5150/6505 (modeled as the SLD 100 or British Tube Lead) are the most common starting points.
Cabinets & Speakers: A 4x12 Rectifier or 4x12 Marshall style cabinet with Celestion V30 speakers is standard for their "fierce" and "dense" tone.
EQ Settings: The "A7X" sound features full mids and tight bass. A common EQ profile includes: Bass: 5–6
Mids: 3–4 (or slightly boosted around 1–2kHz for clarity) Treble/Presence: 6–7 2. Popular Community Presets
Independent creators and ToneNET users offer "hot" presets for specific tracks or eras: AmpliTube Preset and TONEX Tone Model sharing community
Achieving the "hot" signature Avenged Sevenfold (A7X) guitar tone in AmpliTube 5 requires a balance of high gain and mid-range clarity rather than a "scooped" metal sound. 1. Essential Amp Selection
To replicate Synyster Gates and Zacky Vengeance's sound, look for British-voiced or high-gain American amp models in IK Multimedia's AmpliTube 5:
Mesa/Boogie Triple Rectifier / Dual Rectifier: Ideal for the heavy rhythm tones found on Waking the Fallen.
British High Gain (Marshall-style): Models like the Brit 8000 or Brit Silver work well for the saturated, mid-forward tones of later albums.
German Gain (ENGL or Diezel style): Use these for the ultra-tight, modern aggression heard on City of Evil. 2. Core Tone Settings
A7X tones are famously "un-scooped." Start with these baseline settings:
Gain: Set between 6–7 for rhythm to maintain clarity. Avoid maxing it out, which can lead to muddiness. EQ Balance: Mids: Boost to 7 for Synyster’s lead presence. Bass: Keep around 6–7 for Zacky’s thick rhythm.
Treble/Presence: Set to 6–7 to ensure the high-end cuts through without being harsh. 3. Signal Chain & Effects
Overdrive: Place a TubeScreamer (TS) or SD-1 style pedal in front of the amp with the Drive low and Volume high. This "tightens" the low end for fast riffs.
Noise Gate: Use an aggressive gate setting to ensure silent stops during staccato riffs.
Cabinet/Mics: Use the VIR™ (Volumetric Impulse Response) technology in AmpliTube 5 to move mics closer to the cone for brightness or further away for more room air.
Harmonies: For the signature "dual-guitar" sound, use a harmony pedal or record two separate tracks panned left and right, harmonized in major thirds.
Watch these tutorials to see specific AmpliTube 5 settings for different Avenged Sevenfold eras:
Through empirical testing, three specific settings in AmpliTube 5 generate the signature hot A7X attack: