The Epson Stylus Photo 1390 is a legendary A3+ printer, but it is programmed to stop functioning once its internal "Waste Ink Counters" reach a specific limit. To keep the hardware running, users utilize a specialized utility known as the Adjustment Program (or Resetter). 🛠️ What is the Epson 1390 Adjustment Program?
The Adjustment Program is a maintenance software used by technicians to communicate with the printer's firmware. Its primary purpose is to perform "service" tasks that are not available in the standard print driver.
Service Requirement: Modern printers use internal sponges (waste ink pads) to catch excess ink during cleaning cycles.
Safety Lock: When the printer "thinks" these pads are full, it triggers a "Service Required" error (flashing red lights).
The Solution: The Resetter clears the digital counter back to 0%, allowing the printer to resume operation. 📋 Key Functions of the Utility
While most users only use it for the counter reset, the tool offers several deep-level maintenance options:
Waste Ink Pad Counter Reset: Clears the main pad and platen pad counters.
EEPROM Operations: Allows technicians to back up or restore the printer’s memory settings.
Initial Ink Charge: Forces a deep prime of the ink lines (useful after a long period of storage).
Head Cleaning: Performs a more powerful cleaning cycle than the standard Windows utility.
Print Head ID Input: Necessary if you replace the physical print head with a new one. ⚠️ Essential Safety Warning
Before you use a resetter, you must address the physical reality of the hardware:
Ink Overflow Risk: Resetting the software does not clean the physical sponges. If you reset the counter without cleaning or replacing the pads, ink will eventually leak out of the bottom of the printer.
Hardware Check: It is highly recommended to install an External Waste Ink Tank (an "ink dump") before performing a reset. This redirects waste ink into a bottle for easy disposal.
Source Reliability: Be cautious when downloading these tools. Many "free" versions found online contain malware or viruses. Always scan the .exe file with updated antivirus software. 🚀 How to Use the Resetter (General Steps)
Connection: Connect the printer via USB cable (Wi-Fi or network resets often fail).
Selection: Open AdjProg.exe and click Select. Choose the "Stylus Photo 1390" model and the correct Port.
Maintenance: Click Particular Adjustment Mode and find Waste ink pad counter.
Check & Initialize: Click Check to see current levels. Select the checkboxes and click Initialization to wipe the memory. Reboot: Turn the printer off and back on when prompted.
If you'd like to proceed with maintenance, I can help you find: Tutorials for installing an external waste ink bottle.
Troubleshooting steps if the "Service Required" light persists.
Compatibility checks for other Epson L-Series or Stylus models.
Are you currently seeing a specific error message or a flashing light pattern? Adjustment Program Epson 1390 Resetter
Epson 1390 Adjustment Program: A Comprehensive Guide to Resetting Your Printer
Are you experiencing issues with your Epson 1390 printer, such as error messages, clogged printheads, or difficulties with ink cartridge replacement? If so, you may need to use an adjustment program, also known as a resetter, to restore your printer to its optimal functioning state. In this post, we'll provide a detailed guide on the Epson 1390 adjustment program, including what it is, how to use it, and where to find the software.
What is an Adjustment Program (Resetter)?
An adjustment program, also known as a resetter, is a software tool designed to reset and adjust the internal settings of Epson printers. The program helps to resolve various issues, such as:
Why Do You Need an Adjustment Program for Epson 1390?
The Epson 1390 is a popular all-in-one printer, scanner, and copier. However, like any complex device, it can experience technical issues. Using an adjustment program can help resolve these problems and restore your printer to its normal functioning state.
Features of the Epson 1390 Adjustment Program
The Epson 1390 adjustment program offers several key features, including:
How to Use the Epson 1390 Adjustment Program
Using the Epson 1390 adjustment program is a relatively straightforward process. Here's a step-by-step guide:
Where to Find the Epson 1390 Adjustment Program Software
The Epson 1390 adjustment program software can be downloaded from various online sources, including:
Precautions When Using the Adjustment Program
When using the Epson 1390 adjustment program, please take note of the following precautions:
Conclusion
The Epson 1390 adjustment program is a useful tool for resolving various issues with your printer. By following the steps outlined in this post, you can download, install, and use the adjustment program to reset and adjust your printer's settings. Remember to exercise caution when using the software and follow the recommended precautions to avoid any potential issues.
Additional Tips and Resources
Adjustment Program Epson 1390 Resetter: The Ultimate Guide to Fixing Service Required Errors
"Service Required" is a message that every Epson Stylus Photo 1390 owner dreads. Just when you need to print a high-quality A3 photo, your printer suddenly stops, and the red lights begin to flash alternately. This isn't a mechanical failure; it is a programmed safety limit.
To get your printer back to work, you need the Epson 1390 Adjustment Program (Resetter). In this guide, we will walk you through what this software is, why you need it, and how to use it safely. What is the Epson 1390 Adjustment Program?
The Epson 1390 Adjustment Program is a specialized utility tool used by technicians to maintain and repair Epson printers. Its most common use for home and office users is resetting the Waste Ink Pad Counter.
Every time you print or clean your print head, a small amount of ink is pumped into internal sponges called waste ink pads. Epson printers use a built-in counter to track this. Once the counter reaches 100%, the printer locks itself to prevent ink from overflowing and damaging the internal electronics. Common Symptoms of a Full Counter The Epson Stylus Photo 1390 is a legendary
Before you download the resetter, ensure your printer is actually experiencing a "Counter" issue. The signs include:
Status Monitor Message: A popup on your computer says "Service Required."
Flashing Lights: The Power light, Paper light, and Ink light flash alternately (one after the other).
Total Lockout: The printer refuses to perform any functions, including scanning or cleaning. How to Use the Epson 1390 Resetter (Step-by-Step)
Note: Before starting, disable your Antivirus temporarily, as many security programs flag reset utilities as "False Positives" because they interact with hardware ports.
Connect Your Printer: Ensure your Epson 1390 is connected to your PC via a USB cable and turned on. Run the Software: Open the AdjProg.exe file.
Select Model: Click the "Select" button. Choose Stylus Photo 1390 from the model list and click OK.
Enter Maintenance Mode: Click on "Particular Adjustment Mode."
Waste Ink Pad Counter: Scroll down the list, select "Waste ink pad counter," and click OK.
Check the Status: Click the "Check" button. This will show you the current percentage and point count.
Reset: Check the box next to "Main pad counter" and click "Initialization."
Power Cycle: A popup will tell you to turn off your printer. Turn the printer off, then click OK. Turn the printer back on.
Your printer should now be back to its normal state with a 0% counter! Important Warning: The Physical Hardware
Resetting the software is only half the battle. Because the printer "thinks" the ink pads are empty, you must remember that the physical pads are still saturated with old ink.
Clean the Pads: If you reset the printer more than twice without cleaning or replacing the pads, ink will eventually leak out of the bottom of the printer.
External Waste Tank: Many 1390 users install an "External Waste Ink Bottle" kit. This bypasses the internal sponges and collects the waste ink in an external jar, making the software reset much safer to perform repeatedly. Conclusion
The Epson 1390 Adjustment Program is a lifesaver for photographers and office workers who rely on this A3 workhorse. By resetting the Waste Ink Pad Counter, you save hundreds of dollars in professional repair fees and avoid the landfill. Just remember to keep an eye on your physical ink sponges to keep your workspace clean.
Unlocking the Full Potential of Your Epson 1390 Printer: A Comprehensive Guide to the Adjustment Program Epson 1390 Resetter
As a printer owner, you've likely encountered the frustration of dealing with error messages, clogged print heads, and decreased print quality over time. For Epson 1390 printer users, the Adjustment Program Epson 1390 Resetter is a game-changing tool that can help resolve these issues and restore your printer to its optimal performance. In this article, we'll explore the ins and outs of the Adjustment Program Epson 1390 Resetter, its benefits, and how to use it to breathe new life into your printer.
What is the Adjustment Program Epson 1390 Resetter?
The Adjustment Program Epson 1390 Resetter, also known as the Epson 1390 resetter, is a software tool designed to reset the printer's internal counters and restore its factory settings. This program is specifically developed for the Epson 1390 printer model, ensuring a safe and effective reset process. The Adjustment Program Epson 1390 Resetter helps to resolve various issues, including:
Benefits of Using the Adjustment Program Epson 1390 Resetter Error messages (e
By using the Adjustment Program Epson 1390 Resetter, you can:
How to Use the Adjustment Program Epson 1390 Resetter
Using the Adjustment Program Epson 1390 Resetter is a relatively straightforward process. Here's a step-by-step guide to get you started:
Step 1: Download and Install the Adjustment Program Epson 1390 Resetter
Download the software from a reputable source and follow the installation instructions. Make sure to select the correct version compatible with your operating system.
Step 2: Connect Your Printer
Connect your Epson 1390 printer to your computer using a USB cable. Ensure that the printer is turned on and properly connected.
Step 3: Run the Adjustment Program Epson 1390 Resetter
Launch the Adjustment Program Epson 1390 Resetter software and select the correct printer model from the list. Click on the "OK" button to proceed.
Step 4: Read the Printer Information
The software will read the printer's information and display it on the screen. Take note of the current waste ink counter values and other relevant data.
Step 5: Reset the Waste Ink Counter
Click on the "Waste Ink Counter" tab and select the "Reset" button. Confirm that you want to reset the counter.
Step 6: Reset the Ink Levels
Click on the "Ink Levels" tab and select the "Reset" button. This will reset the ink levels to their default values.
Step 7: Restart Your Printer
Turn off your printer and then turn it back on. The Adjustment Program Epson 1390 Resetter process is now complete.
Common Issues and Troubleshooting Tips
While using the Adjustment Program Epson 1390 Resetter, you may encounter some issues. Here are some common problems and troubleshooting tips:
Conclusion
The Adjustment Program Epson 1390 Resetter is a powerful tool that can help you resolve common issues with your Epson 1390 printer. By resetting the internal counters and restoring factory settings, you can enjoy improved print quality, extend the life of your printer, and reduce waste. While the process may seem daunting, with the right guidance, you can successfully use the Adjustment Program Epson 1390 Resetter to breathe new life into your printer.
FAQs
By understanding the benefits and uses of the Adjustment Program Epson 1390 Resetter, you can take control of your printer's performance and extend its lifespan. Whether you're a home user or a business owner, this comprehensive guide has provided you with the knowledge and confidence to unlock the full potential of your Epson 1390 printer.
Here is comprehensive content regarding the Epson 1390 Adjustment Program (Resetter). You can use this text for a blog post, a download page, or a support guide.