__top__ | Actia Psa Xs Evolution 9780z5 Driver Upd

Getting the Actia PSA XS Evolution (9780.Z5) interface to work correctly on modern Windows versions—like Windows 10 or 11—can be a bit of a puzzle. This diagnostic tool is essential for Peugeot and Citroën owners using DiagBox, Lexia 3, or PP2000.

Here is a blog post guide designed to help you navigate the driver and firmware updates needed to get your device running smoothly.

Master Your PSA Diagnostics: A Guide to Actia PSA XS Evolution Driver Updates

If you've recently upgraded your laptop or are trying to revive an old Lexia 3 kit, you’ve likely hit the "VCI not found" error. The Actia PSA XS Evolution (Model 9780.Z5) is a robust tool, but its drivers often struggle with modern 64-bit operating systems. 1. Understanding Your Drivers vs. Firmware

It’s important to distinguish between the two components that make your interface work:

Windows Driver: This is the software on your PC (e.g., "Multi-instance" or "UMDF" drivers) that allows Windows to recognize the USB device.

Interface Firmware: This is the "brain" inside the Actia box. It often needs to be updated to a specific version (like 4.2.4 or 4.3.x) to be compatible with newer versions of DiagBox. 2. Where to Download the Latest Drivers Official drivers can be found on the ACTIA Support Page. For Windows 10 & 11: Look for the XS FAMILY section.

Basic+ XS / CAT Level X driver: Version 2.9.0.8 (Compatible with Windows 8, 10, and 11). Lite XS Level X driver: Version 2.9.0.0. 3. Installation Step-by-Step

Installing the driver is often done alongside the DiagBox software, but if you're doing a manual update, follow these steps:

Preparation: Disconnect the VCI from your computer before starting the installation.

Run as Admin: Right-click your driver setup file and select Run as Administrator.

The "UMDF" vs "Multi-instance" Choice: If you are prompted or have issues on older systems (like Windows 7), users often find that the "Multi-instance" driver is more stable than the "UMDF" version.

Device Manager Check: Once installed, plug in your VCI. Open Device Manager. It should appear under "Universal Serial Bus controllers" as "ACTIA USB Devices" or similar. 4. Troubleshooting Common Issues PSA XS Evo driver help | Peugeot Forums

The ACTIA PSA XS Evolution (9780.Z5) , commonly used for Citroën and Peugeot diagnostics with Diagbox, Lexia-3, and PP2000, requires specific drivers to ensure the VCI (Vehicle Communication Interface) is recognized by Windows. Driver Specifications & Versions

The driver typically identifies the hardware in Windows Device Manager as "USB Com Board Evolution Driver" under "ACTIA USB Devices".

Standard Driver: The standard ACTIA USB Devices Driver (v1.00.00) was originally designed for Windows XP through Windows 7.

Driver Variants: There are two main versions for clone/aftermarket interfaces: UMDF: User-Mode Driver Framework.

Multi-instance: Often cited as the more stable choice for modern operating systems if the UMDF version fails.

Modern OS Compatibility: For Windows 10 and 11, the Basic+ XS / CAT Level X driver (Version 2.9.0.8) is used for standard ACTIA hardware. Update & Installation Procedure

Updating the driver is distinct from updating the internal firmware of the unit. Driver Update Steps: Plug in all ACTIA USB devices.

Run ACTIAPnPInstaller.exe from your software source (often found in the Diagbox installation directory).

Wait for the final confirmation dialog before disconnecting.

Internal Firmware (Interface Checker): The unit's internal firmware can be managed via a tool called Interface Checker. Popular firmware versions like 4.2.4 or 4.3.0 are often required for newer versions of Diagbox (v7.57 or higher) to recognize the hardware. Common Issues Support - ACTIA IME

The Actia PSA XS Evolution (9780.Z5) is effectively the "Swiss Army Knife" of dealer-level diagnostics for Citroën and Peugeot vehicles, offering a level of control that standard OBDII scanners simply cannot match.

The "Expert" Perspective: A Professional Tool in Your Driveway

This interface is a specialized bridge between your car’s electronic brain and specialized software like DiagBox, Lexia 3, and Peugeot Planet 2000. Unlike generic scanners that only read engine codes, the XS Evolution allows you to:

Deep Dive Diagnostics: Access every single ECU in the car, from the airbag module to the climate control.

Dealer Magic: Perform tasks like programming new keys, resetting service intervals, and even "telecoding"—changing hidden settings like enabling a newly installed CD changer or cruise control.

Live Data Monitoring: View real-time graphs of engine RPM, battery voltage, and sensor readings to catch intermittent faults before they become breakdowns. Hardware & Compatibility

Build Quality: The 9780.Z5 version is often cited as the robust "Full Chip" reference, essential for stability when communicating with newer CAN-BUS vehicles.

Connectivity: It typically uses a 16-pin OBDII connector for modern cars and can adapt to 30-pin connectors for vintage PSA models (pre-2001). Actia Psa Xs Evolution Download Windows - Facebook

Maintaining your Actia PSA XS Evolution (9780.Z5) interface is crucial for successful vehicle diagnostics on Peugeot and Citroën cars. Since this hardware serves as the bridge between your laptop and the vehicle's ECU, the driver is the most vital component.

This guide covers everything you need to know about finding, installing, and updating your 9780.Z5 drivers to ensure seamless communication with Diagbox, Lexia 3, and PP2000. The Role of the 9780.Z5 Driver

The Actia PSA XS Evolution is a complex multiplexer. Without the correct driver update, you will likely encounter the "Interface Not Connected" error in Diagbox. The driver allows Windows to recognize the USB device as a "Multi-instance" hardware component, specifically mapped for PSA diagnostic protocols. Step 1: Verify Hardware Compatibility

Before updating, ensure your hardware is capable of supporting the latest driver versions. actia psa xs evolution 9780z5 driver upd

Check the Serial: Genuine or high-quality Revision C clones are preferred.

Firmware Version: Your firmware version (e.g., 4.3.0 or higher) must match the driver generation.

Connection: Always use a direct USB port; avoid using USB hubs which can drop data packets. Step 2: Where to Download the Update

The driver is rarely a standalone download from Actia for end-users. Instead, it is typically bundled with Diagbox software updates. Diagbox Root Folder: Look in C:\AWROOT\bin\fi\APPDIAG.SYS.

Drivers Folder: Check C:\APPLIC\LEXIA\EXE or the installation media for a folder named "Drivers" or "USB."

Device Manager: The hardware should appear under "Universal Serial Bus controllers" as "ACTIA USB Devices." Step 3: Clean Installation Procedure

If your driver is outdated or corrupted, follow these steps for a clean update: Disconnect the interface from your PC.

Uninstall the old driver via Device Manager (check "Delete the driver software for this device"). Restart your computer.

Run the Driver Setup (often named PSA_XS_Evolution_Driver_Setup.exe).

Plug in the Interface. Windows should now identify it automatically. Step 4: Troubleshooting Common Issues

Code 10 Error: This usually means the driver is incompatible with your version of Windows (e.g., trying to run 32-bit drivers on a 64-bit system).

Unknown Device: If Windows sees an "Unknown Device," the USB cable or the internal solder points on the 9780.Z5 unit may be faulty.

Driver Signature Enforcement: On Windows 10 or 11, you may need to disable "Driver Signature Enforcement" to allow the diagnostic drivers to initialize properly. Comparison: Official vs. Clone Drivers Official 9780.Z5 High-Quality Clone Stability Moderate to High Diagbox v9+ Support Requires Rev C Firmware Driver Source Actia / PSA Community Patches Windows 10/11 Requires Manual Setup Final Tips for Success

Use a Dedicated Laptop: Diagnostic software often conflicts with antivirus or other brand tools (like VCDS or Renault CLIP).

Keep Firmware Synced: If you update Diagbox to a newer version (like v9.129), use the "Interface Checker" tool to ensure your 9780.Z5 firmware matches the new driver requirements.

What Windows operating system (7, 10, or 11) is on your laptop?

Are you getting a specific error code when you plug the device in?

Knowing these details will help me provide the exact setup file or firmware fix you need.

Blog Title: Troubleshooting the ACTIA PSA XS Evolution 9780Z5: A Guide to Driver Updates

Published: October 5, 2023 | Category: Diagnostic Tools

If you work with Peugeot, Citroën, DS, or Opel/Vauxhall vehicles, you are likely familiar with the ACTIA PSA XS Evolution. Specifically, the pass-through device model 9780Z5 is a workhorse for dealership-level diagnostics using DiagBox and PP2000.

However, one of the most common pain points users face is the dreaded "Driver Not Found" or "Interface Not Recognized" error in Windows. If you are wrestling with the ACTIA PSA XS Evolution 9780Z5 driver update, you’ve come to the right place.

Here is everything you need to know to get your interface communicating with your laptop again.

Final recommendation

• Avoid any driver updater tool claiming to fix “actia psa xs evolution 9780z5.”
• Use only official ACTIA/PSA software channels.
• If your device is not recognized, check USB cable, Windows driver signature enforcement, and reinstall ACTIA VCI drivers from a known good source.

Would you like help identifying the correct driver package for a genuine ACTIA PSA XS Evolution (e.g., version number or Windows error code)?

This report outlines the technical details and installation procedures for the Actia PSA XS Evolution (9780.Z5) diagnostic interface drivers and firmware. 1. Hardware Overview

The 9780.Z5 is the original part number for the Actia PSA XS Evolution vehicle communication interface (VCI), primarily used for professional diagnostics of Peugeot and Citroën vehicles.

Official Designation: PSA XS Evolution (developed by ACTIA).

Hardware Identifier: Often identified by the "Reference C" label for compatibility with newer software versions like DiagBox 7.xx and above.

USB ID: Typically appears in Windows Device Manager with the hardware ID USB\VID_103a&PID_f000. 2. Driver Installation & Updates

Drivers for this interface are generally bundled with the diagnostic software suites (DiagBox, Lexia 3, or PP2000) but can be updated independently using the following methods:

Official Sources: The XS FAMILY driver package (version 2.9.0.8 or newer) is available from ACTIA Support for Windows 8, 10, and 11 (x86/x64). Manual Installation:

Run the ACTIAPnPInstaller.exe utility found in your software's driver folder before plugging in the device.

For a Driver Update, ensure all Actia USB devices are plugged in before running the installer.

Confirm the device appears as "ACTIA USB Devices" in the Device Manager. 3. Firmware Management Getting the Actia PSA XS Evolution (9780

Firmware is the internal software running on the interface itself and is critical for communication stability with vehicle ECUs. Support - ACTIA IME

XS FAMILY. Basic+ XS / CAT Level X driver | Version 2.9.0.8, for Windows 8 (x86/amd64) | Windows 10 (x84/amd64) | Windows 11 (x86/ PSA interface tester - French Car Forum

ACTIA PSA XS Evolution (9780.Z5) is the standard hardware interface (VCI) used for Peugeot and Citroën diagnostics through software like

. Updating the driver correctly is essential for the PC to recognize the probe in "Evolution" mode rather than as a generic USB device. 1. Official Driver Download

For the most stable and authentic drivers, navigate to the official ACTIA IME Support Page

. Depending on your specific hardware revision and operating system, you can find: XS Family Drivers : Includes the Basic+ XS / CAT Level X driver

(Version 2.9.0.8), compatible with Windows 10 and 11 (x86/amd64). Lite XS Drivers : Version 2.9.0.0 for modern Windows systems. 2. Installation Guide for DiagBox Users

If you are using the interface with DiagBox (the current PSA diagnostic suite), follow these steps to ensure the driver is recognized correctly: Administrative Privileges : Always run driver installers as an administrator. PSA VCI Driver : In newer versions like DiagBox 9.85, a separate PSA VCI Driver

must be installed. This is often provided as a standalone executable (e.g., PSA_VCI_Driver.exe Detection Check

: After installation, plug the interface into your laptop's USB port. Use the VCI Manager

(often included with the driver package) to confirm that the device is detected and recognized. 3. Updating the Firmware (Evolution Mode)

If your device is not recognized by newer DiagBox versions, you may need a firmware update to enable "Evolution" mode: Automatic Updates

: Normally, DiagBox automatically checks and updates the interface firmware when launched. Hardware Compatibility

: Some older or "clone" interfaces may require a manual bootloader change or serial flash to be recognized as an "evolving" driver. Manual Tools : Tools like PSA Interface Checker

are commonly used in the community to manually force a firmware update to versions like V4.2.4 or higher to ensure compatibility with DiagBox 7.xx and above. French Car Forum 4. Troubleshooting Tips USB Connection

: If the VCI is not found, try unplugging it, waiting a few seconds, and plugging it back in after DiagBox has fully loaded. Operating System

: While newer drivers support Windows 10/11, older Lexia 3 or PP2000 software often requires Windows XP Windows 7 32-bit for full stability. Avoid Internet

: When using "patched" or older versions of the software, it is recommended to disconnect from the internet

to prevent the software from attempting an unauthorized online update that could deactivate the interface. French Car Forum firmware version numbers required for a particular version of DiagBox? Support - ACTIA IME

XS FAMILY. Basic+ XS / CAT Level X driver | Version 2.9.0.8, for Windows 8 (x86/amd64) | Windows 10 (x84/amd64) | Windows 11 (x86/ Support - ACTIA IME

XS FAMILY. Basic+ XS / CAT Level X driver | Version 2.9.0.8, for Windows 8 (x86/amd64) | Windows 10 (x84/amd64) | Windows 11 (x86/

Actia PSA XS Evolution (Ref: 9780.Z5) is a specialized OBDII diagnostic interface used for Peugeot and Citroën vehicles. It acts as the hardware bridge between a vehicle's ECU and diagnostic software such as Peugeot Planet 2000 (PP2000) Driver & Firmware Architecture

The device is typically recognized in the Windows Device Manager as an " ACTIA USB Device - USB Com Board Driver Driver Evolution

: Modern updates often require the interface to be recognized as an "evolving" driver. This frequently involves updating the bootloader

and serial content (SPI) to ensure compatibility with newer DiagBox versions. Version Check : Firmware versions like APPLI_XS_Fuji_P106138A V4.3.0 are standard for stable communication with DiagBox. Driver Types

: Depending on the specific hardware revision (Basic+, Lite, etc.), drivers may range from version Installation & Update Process

Updating the drivers is usually bundled with the installation of the ACTIAPnPInstaller (Driver Manager) included in diagnostic software packages. Preparation

: Use a 32-bit Windows environment (XP or Windows 7) for older software, though DiagBox 9.85+ supports Windows 10 and 11. Driver Manager ACTIAPnPInstaller

as an administrator to pre-install necessary USB drivers before plugging in the hardware. Hardware Connection

: Once the software is installed, plug the 9780.Z5 into the PC. Windows should automatically detect and assign the "USB Com Board" driver. Interface Checker : Use a utility called PSA Interface Checker

to verify the current firmware version and apply updates if the interface is not "initialized" correctly. System Compatibility & Requirements diag box - French Car Forum

Unread post by moomoo » Tue Apr 26, 2022 10:12 am. Hello, I have the Actia PAS XS Evolution diag box...it is the 9780. Z5 version. French Car Forum Diagbox for Citroen (and how to get swindled)

The ACTIA PSA XS Evolution (9780.Z5) is a professional-grade communication interface (VCI) used for diagnosing and programming Peugeot and Citroen vehicles via software like DiagBox, Lexia 3, and PP2000. Driver Update & Installation Guide

Proper driver installation is critical for the hardware to communicate with your diagnostic software. Blog Title: Troubleshooting the ACTIA PSA XS Evolution

Preparation: Ensure you have administrative rights on your PC. It is recommended to use Windows 7 (32-bit) for maximum compatibility, though newer drivers support Windows 10 and 11. Initial Driver Installation: Disconnect the VCI from your computer.

Run ACTIAPnPInstaller.exe (often found on your installation CD or within the VCI Driver Pack).

Wait for the "Installation Successful" dialog before plugging the USB device back in. Updating Existing Drivers:

Connect the PSA XS Evolution interface to your computer via USB.

Run the same ACTIAPnPInstaller.exe tool. It will detect the hardware and apply the update.

Verification: Open the Windows Device Manager. Under "Universal Serial Bus controllers," the device should appear as "ACTIA USB Devices" or similar without any warning icons. Compatibility & Software Downloads

Operating Systems: Drivers are available for Windows 8, 10, and 11 (both x86 and amd64 architectures) through the ACTIA IME Support Page.

Legacy Systems: If using older versions of Lexia or PP2000, specialized 32-bit drivers may be required for stability.

Safety Tip: Avoid generic driver-updating software. Always use drivers provided by the official manufacturer or reputable automotive forums like French Car Forum to avoid malware or hardware bricking. Troubleshooting Common Issues

Device Not Recognized: If DiagBox cannot see the interface despite drivers being installed, try connecting the VCI after launching the software when prompted.

Clone vs. Genuine: Many units sold are "clones." If your interface has a serial number like 921815C, it may require specific firmware patches to work with newer versions of DiagBox (v9.xx).

Connection Dropping: Ensure you are using a high-quality USB cable and avoid using USB hubs, which can cause communication timeouts during ECU telecoding. Support - ACTIA IME

XS FAMILY. Basic+ XS / CAT Level X driver | Version 2.9.0.8, for Windows 8 (x86/amd64) | Windows 10 (x84/amd64) | Windows 11 (x86/ Support - ACTIA IME

XS FAMILY. Basic+ XS / CAT Level X driver | Version 2.9.0.8, for Windows 8 (x86/amd64) | Windows 10 (x84/amd64) | Windows 11 (x86/ Support - ACTIA IME

XS FAMILY. Basic+ XS / CAT Level X driver | Version 2.9.0.8, for Windows 8 (x86/amd64) | Windows 10 (x84/amd64) | Windows 11 (x86/ Genuine Actia XS not found - French Car Forum

The Actia PSA XS Evolution 9780.Z5 remains the gold-standard interface for diagnosing Peugeot and Citroën vehicles, though managing its drivers and firmware updates can be a technical hurdle for DIYers.  Product Overview 

The 9780.Z5 is the official VCI (Vehicle Communication Interface) used with Diagbox, Lexia 3, and PP2000 software. It is designed to facilitate deep-level diagnostics, including reading fault codes, live data monitoring, and ECU coding.  The Update Experience 

Updating this device typically involves two distinct layers: 

Driver Installation: Most users rely on the ACTIAPnPInstaller.exe found on support CDs or specialized driver portals. For modern systems, a "Multi-instance" driver is often required over the older UMDF versions to ensure the interface is recognized by Windows 10/11.

Firmware Evolution: The interface often needs to be flashed to specific versions (like 4.3.2) to work with newer Diagbox releases (v7.xx and above). This update often triggers automatically when you first launch Diagbox while connected to the vehicle.  Key Performance Insights  Pros:

Full Functionality: Unlike generic OBDII scanners, a "Full Chip" version of this interface allows for component activation (e.g., testing fans, wipers) and telecoding (e.g., enabling an Aux port).

Longevity: Well-built units (especially genuine Actia or high-quality clones) can last years and support vehicles from the early 2000s through the 2020s. Cons:

Blacklisting Risks: Older "Reference B" interfaces are often blacklisted by Diagbox software above version 5.29. Users frequently have to use an Interface Checker tool to verify if their unit needs a serial number reflash to "Reference C" for compatibility.

Cumbersome Setup: Installing the accompanying software and its multiple incremental updates is notoriously slow and may require a dedicated 32-bit Windows laptop or a virtual machine.  Quick Troubleshooting Tips  diag box - French Car Forum

For users of the Actia PSA XS Evolution (9780.Z5) diagnostic interface,

maintaining the correct driver is essential for seamless operation with

. This interface serves as the primary dealer-level diagnostic tool for Peugeot and Citroën vehicles. Driver Availability and Compatibility

Recent updates focus on ensuring compatibility with modern operating systems, specifically Windows 10 Windows 11 (both 32-bit and 64-bit). Official Drivers : The latest driver versions, such as Version 2.9.0.8 (for Basic+ XS) and Version 2.9.0.0 (for Lite XS), are available through ACTIA IME Support PSA VCI Driver

: Many newer Diagbox installations (like version 9.85 or 9.91) require a standalone PSA VCI Driver

to be installed as an administrator to detect the hardware properly. Firmware Requirements

: For full functionality with Diagbox 7.xx and higher, the adapter often requires Firmware 4.3.2

(Reference "C"). This firmware typically updates automatically upon launching the Diagbox software for the first time. Key Installation Steps Support - ACTIA IME

XS FAMILY. Basic+ XS / CAT Level X driver | Version 2.9.0.8, for Windows 8 (x86/amd64) | Windows 10 (x84/amd64) | Windows 11 (x86/

It looks like you're looking for guidance on updating a driver for the ACTIA PSA XS Evolution 9780Z5 — a diagnostic interface used for PSA vehicles (Peugeot, Citroën, DS, Opel, etc.).

Below is a step-by-step guide to update the driver on Windows 10/11.

2. Where to get official drivers & software

• ACTIA official support (actia.com) – requires login/contract.
• PSA / Stellantis technical portal (servicebox, techdoc) – subscription needed.
• Licensed diagnostic tool resellers (e.g., DiagX, EasyDiag).

1. The Device Interface

The "XS Evolution" is a high-speed USB-to-CAN interface used primarily for Peugeot and Citroën (PSA Group) vehicles. It is the hardware successor to the older "Lexia 3" interfaces.